FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note on Interference
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
For more products, please visit www.brookstone.com.
Warranty Information
One Year Limited Warranty.
Customer Service: 732-994-2301; email: help@smartpointco.com
The BROOKSTONE trademark, names, and logos are owned by BKST Brand Holdings LLC ©2020. All rights reserved. Manufactured, marketed, and distributed by Smartpoint LLC, under license. Google, Android, and Google Play are trademarks of Google LLC. App Store® is a registered trademark of Apple, Inc. All trademarks and registered trademarks are property of their respective owners. Made in China.
©Smartpoint LLC, 250 Liberty Street Metuchen NJ, Suite 1A
Specifications
- Model: BKWIFICAMB
- Resolution: 1920x1080
- Alarm: Motion and sound detection
- Night Vision: up to 5m
- Frame rate: Up to 15 fps
- Sensor: 1/3 CMOS
- Viewing Angle: 100°
- Audio: Microphone & Speaker built-in
- Micro SD Card Storage: Up to 32GB
- Compression: H.264
- Power: 5V/1A (USB)
- Operating System: Android™ 8.0 or higher, iOS 10.0 or higher
Features
- Wi-Fi remote controlled through App
- Night vision
- Motion detection
- Sound detection
- Dimmable night light
- Two-way audio
- Live video
- Video recording
- Takes still photos
- Detects temperature in room
- Plays 3 different lullabies and white noise
Items included in package:
Camera, Magnetic Stand, Silicone Teddy Bear Stand, Adapter, USB Cable, Mounting Kit and User Manual.
Product Configuration
The Brookstone Smart Baby Monitor and Camera comes in two main forms: a standard camera unit and a camera unit housed in a silicone teddy bear case. Both units feature the following components:
- Reset Button: A small button typically requiring a pin to press, used for resetting the device.
- Micro SD Card Slot: For inserting a Micro SD card for local storage of recordings.
- Temperature Sensor: Detects the ambient temperature of the room.
- Light Sensor: Detects ambient light levels, influencing features like night vision.
- Built-in MIC: Integrated microphone for audio input and two-way communication.
- Lens: The camera's optical lens for capturing video.
- Indicator Light: A light that indicates the camera's status (e.g., blinking red for setup, solid for connected).
- Night Lamp: A dimmable light feature.
- Micro USB: The port for power input (5V/1A).
- Tripod: A mounting point for tripod compatibility (on the standard camera unit).
- Dual Speakers: For audio output, including two-way audio and lullabies.
- Magnetic Base: A base for the standard camera unit that allows for flexible positioning and wall mounting.
- Teddy Silicone Case: A soft, bear-shaped silicone cover for the camera, providing a child-friendly appearance.
Download App
To control the Brookstone Smart Baby Monitor and Camera, download the "Brookstone Smart" app:
- Android: Download "Brookstone Smart" app from Google Play. The app icon is a dark grey square with "Brookstone SMART" text in white.
- iPhone: Download "Brookstone Smart" app from the App Store. The app icon is the same as for Android.
The app can be found by searching "Brookstone Smart" on the respective app stores or by scanning the provided QR codes. One QR code links to the Apple App Store, indicated by a button with "Available on the App Store" and the Apple logo. The other QR code links to Google Play, indicated by a button with "GET IT ON Google Play" and the Google Play logo.
Registration and Login
To begin using the app and your camera:
- Run the "Brookstone Smart" app from your smartphone.
- Register and login. The app's initial screen shows the "Brookstone SMART" logo and options to "Register" or "Log in with existing account". After successful login, the app displays a home screen with weather information (temperature, humidity, air pressure) and a section for "All Devices", "Living Room", "Bedroom", etc. A large plus (+) icon is present to add new devices, with a message "No devices, please add" and an "Add Device" button. The bottom navigation bar includes "Home", "Smart", and "Me" tabs.
Screenshots may slightly differ from actual app.
Add Device
Follow these steps to add your camera to the app:
- Plug in the Camera and wait for the red indicator light to blink rapidly and for a chime sound. If the light does not blink rapidly or you don't hear a chime, press the reset button for 3-6 seconds with the included pin, then release. The light should then start blinking rapidly, and you will hear a chime sound, indicating the camera is ready for setup.
- Ensure your phone is connected to a 2.4GHz Wi-Fi network.
- Press the plus (+) symbol in the top right corner of the app's home screen. From the list of devices to add, select "Smart Camera". The device selection screen shows various device types like "Vacuum", "Door/Window Sensor", "Water Sensor", "Motion Sensor", "Smart Camera", "Light Switch", "Smart Plug", "Smart Outlet", "Smart Controller", and "Other Devices". The "Smart Camera" option is highlighted.
- Press the "next step" button.
- Confirm your phone is connected to the Wi-Fi network the device will connect to. Enter your Wi-Fi network password. The app screen prompts to "Select 2.4 GHz Wi-Fi Network and enter password", with options to switch between 2.4GHz and 5GHz (2.4GHz is required). Fields for "Router name" and "Password" are provided, followed by a "Next" button.
- Follow the directions in the app and hold the QR code displayed on your phone screen in front of the camera's view. The app displays a large QR code with instructions to "Please scan the QR code from 15 to 20 cm away". Buttons for "No Prompts" and "I Heard a Prompt" are available.
- The connecting process will begin. Do not turn off the Wi-Fi Camera or phone while connecting. Wait for the connection process to complete. The app displays "Adding device... Ensure that the Wi-Fi signal is good." with a spinning search icon and a timer.
- Once the device has been successfully added, name the device as desired in the app. The Wi-Fi Camera is then ready for use. The app confirms "Added." and lists "Baby monitor" with a green checkmark and "Device added successfully". A "Done" button is available.
Push Notifications
Manage notifications for your devices:
- Turn on/off notifications for all connected devices by clicking on the "Me" button at the bottom right of the screen. The "Me" tab is part of the app's bottom navigation bar, alongside "Home" and "Smart".
- Click on the "Settings" button from the "Me" tab. From there, you can toggle all notifications on/off. The settings screen includes options for "Sound" and "App Notification".
- To view notifications within the app, click on "Message Center" on the "Me" tab at the bottom. The "Me" screen lists options such as "Click here to set nickname", "Home Management", "Message Center", "FAQ & Feedback", and "Settings".
Remove a Device
To remove a device from your app:
- From the home screen, click on the device you wish to remove (e.g., "Baby monitor").
- Click on the edit symbol (pencil icon) in the top right corner of the screen. This opens the device settings.
- From the device settings, scroll down and click the "Remove Device" button at the bottom of the screen. The settings screen includes sections like "Basic Function Settings", "IR Night Vision", "ADVANCED SETTINGS" (e.g., "Detection Alarm Settings"), "OFFLINE NOTIFICATION", and "OTHERS" (e.g., "Share Device", "FAQ & Feedback", "Add to Home Screen", "Firmware Information"). The "Remove Device" button is prominently displayed at the bottom.
Magnetic Stand & Silicone Bear Cover
Stand and Mount options
The camera comes with two different stand choices:
- You can place the camera in the soft silicone bear stand to give it a toy-like appearance, which may be appealing to babies or children.
- Alternatively, you can place it in the magnetic base for use as a normal smart camera. The magnetic base allows the camera to be pointed in almost any direction. It also has holes in the bottom for wall mounting.
The manual displays two camera configurations: one in the magnetic base (standard smart camera look) and one in the silicone teddy bear case.
App Functions
Live Video
To view live video, click on the device under "All devices" (e.g., "Baby monitor") and select the camera you just added. Hit the full screen button (an icon with four arrows pointing outwards) in the top left corner to view your live footage at full screen on your phone.
To hide the control panel, press the top right button (an icon with three dots). To view the control panel again, press the same button.
The live video screen shows the camera feed, current temperature (e.g., 72.0°F), and control icons at the bottom. These icons include: Playback, Gallery, Theme Color, Private Mode, Night Mode, Anti-Flicker, Device Volume, and Motion Detection.
Video Recording
To record video, press the "camera" button (a video camera icon) at the top of the control panel. To end recording, press the "camera" button again. The recorded photo and video will be saved in the app (iOS) or the photos and video section (Android). To view recordings, press the "gallery" button (an album icon).
Note: If a Micro SD Card is not present in the camera, Cloud Storage can be purchased by pressing the "Cloud" button on the bottom of the main screen.
Taking a Photo
To take a photo, press the "camera" button (a camera icon) on the control panel. To view your photos, press the "gallery" button.
Infrared Night Vision
Night vision mode can be set to Auto/Off/On. To change modes, press the "Night Mode" button (a crescent moon icon). "Auto" is the default setting, meaning infrared night vision is automatically controlled by the camera. When the area around the camera becomes too dark, infrared night vision activates automatically. When the area around the camera becomes bright again, night vision deactivates automatically.
Two Way Audio
To activate two-way audio, press the "speak" button (a phone receiver icon). When the button turns orange, anything spoken into your phone will be played through the camera's speaker. Simultaneously, you can hear sounds from the live video feed on the camera.
Device Volume
To change the volume on the camera, press the "device volume" button (a speaker icon with waves). A slider will appear, allowing you to adjust the camera's volume.
Motion and Sound Detection
The camera uses infrared sensors for motion detection and also detects sound, allowing you to hear if your baby is crying. Push notifications will be sent to your phone when motion or sound is detected.
To access detection alarm settings, press the camera settings button (gear icon) at the top right. Alternatively, you can access these settings by pressing the "Motion Detection" or "Sound Detection" buttons on the main camera page. You can also set a time window for when alarms will activate by pressing "Schedule" on this page.
To view videos recorded via motion detection, press "Playback" on the main screen. A Micro SD Card in the camera or enabled cloud storage is required to view these saved videos.
Theme Color
The control panel can be set to "Light Mode" or "Dark Mode". To change this, press "Theme Color" (a palette icon) and a pop-up menu will allow you to select either light or dark mode.
Private Mode
The camera has a private mode. When activated, the camera goes to sleep. This mode can be turned on from the main screen by pressing "Private Mode" (a lock icon). When in private mode, the app displays "Device in sleep mode" and a "Turn on the camera" button.
Anti-Flicker
The camera has an "Anti-Flicker" setting to address flickering in footage. Select it from the main screen (an icon with a lightning bolt) and choose the frequency that works best (e.g., 50Hz or 60Hz).
Night Light
The camera features a dimmable night light. From the main camera screen, press "Light" (a light bulb icon) to access options for controlling the night light. You can adjust the dimness or set a timer. The light remains visible even when the camera is in the silicone bear cover.
Lullaby's and White Noise
The camera can play 3 different lullaby songs and white noise. To control this feature, scroll to the bottom of the main camera screen and press "Lullaby" (a musical note icon). From there, you can control the volume, set songs on repeat, and select which song the camera plays.
Viewing Temperature in Room
The camera can display the room's temperature. To access this feature, scroll to the bottom of the main camera screen and press "Temperature" (a thermometer icon). From this screen, you can view the temperature and set alerts for undesired temperature levels. You can also switch the temperature unit between Celsius and Fahrenheit.
Hub Controls (Sound, Video Quality, Zoom In/Out)
You can control various features from the live video feed. A volume button (speaker icon) mutes and unmutes the live feed. A video quality button allows switching between standard and high definition resolution. In the top right corner, there is also a button for zooming in or out on the footage.
Sharing the Device
To share access to your camera with another Brookstone Smart account user:
- Press the camera settings button (gear icon) at the top right of the main camera screen.
- Hit "Share Device" under the "OTHERS" section.
- On the next page, press "Add Sharing" at the bottom.
- Enter the email associated with the other person's Brookstone Smart account. They will receive a notification to accept, granting them access to view your camera through their Brookstone Smart app.
