Brookstone ULTRABASS Wireless Headphones

Model No.: BSBTH250

Compliance Information

FCC Information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Any changes or modifications not expressly approved could void the user's authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Information: This device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Lithium Polymer Battery Warnings

This device contains a non-removable lithium-polymer battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling and disposal.

Rating Label Symbols:

⚡ Direct current symbol: Indicates direct current.
♻️ Recycle symbol: This symbol signifies that a wireless device powered by BlueCore technology, the Bluetooth® word mark, and logos are registered trademarks owned by Bluetooth SIG, Inc., used under license.
FCC logo: This symbol represents FCC Declaration of Conformity and compliance.

Warranty Information

Warranty Control: Brookstone® trademark, name and logos are trademarks of BKST Brand Holdings LLC and used under license. Manufactured and Marked by Southern Telecom, Inc. under license.

Warranty Information: Brookstone warrants this product to be free of defects in materials and workmanship for one year from the date of purchase.

Limited Warranty to Original Consumer: This product, if shipped new in the original container to the original consumer purchaser, is warranted by Brookstone against manufacturing defects in this product when manufactured by or for Brookstone. This warranty extends only to the original consumer purchaser and is not transferable.

To Obtain Warranty Service: Visit our customer support portal: www.customersupport123.com. For troubleshooting, or to order parts, accessories, or replacement headphones, please visit our website or call us at 1-800-846-5616.

Warranty Service Not Provided: This warranty does not cover damage, resulting from accident, misuse, abuse, neglect, improper application, alteration, or modification of the product, unauthorized service, or repairs by anyone other than an authorized service center. If your product is returned, it must be properly packaged to prevent damage in transit. Brookstone is not responsible for any damage that occurs during shipping. All returns must be accompanied by a Return Authorization Number (RAN) which can be obtained by contacting customer support. If the product is returned without a RAN, it will be refused and returned to the sender. All returns are subject to inspection by the authorized service center. If the product is found to be defective, it will be replaced or repaired at Brookstone's discretion. If the product is found to be not defective, it will be returned to the sender at the sender's expense.

Before You Begin

READ THIS MANUAL CAREFULLY AND SAVE FOR FUTURE REFERENCE.

To ensure safe and proper use, read all safety information before using the device. Only use the device as intended. Keep these instructions for future reference.

Safety and Proper Use:

Ensure safe and proper use, read all safety information before using the device. Only use the device as intended. Keep these instructions for future reference.
This device is NOT A TOY. Keep out of reach of children.
Do not disassemble, modify, or repair the device.
Do not expose the device to extreme temperatures (heat or cold), open flames, humidity, or wet conditions.
Do not immerse the device in water.
Keep the device away from strong electromagnetic or sound radiation.
Do not recharge with a damaged adapter or cable.
Do not use the device if the adapter or cable is damaged.
Do not allow the power cord or the connectors of the supplied USB cable to be exposed to water or come into contact with any conductive materials such as liquids, metallic objects.
This device contains a lithium battery and should not be disposed of with regular household waste.
Always use the device in a well-ventilated area.
Never use headphones while driving a vehicle, riding a bicycle, or operating any machinery that requires your immediate attention.

In the Box:

Brookstone ULTRABASS Wireless Headphones (x1)
3.5 mm AUX Cable (x1)
Micro-USB Charging Cable (x1)
User Manual (x1)

Location of Controls

The Brookstone ULTRABASS Wireless Headphones feature several controls for easy operation. The diagram below illustrates the location of each control:

Headphones Diagram:

[LED Indicator]: Located near the power button, indicates Bluetooth status and charging status.

[Power Button / Multifunction Button]: Located on the right earcup. Used for powering the headphones ON/OFF, pairing Bluetooth devices, playing/pausing music, and answering/ending phone calls.

[Volume Up / Next Track Button]: Located on the right earcup. Press to increase volume, press and hold to skip to the next track.

[Volume Down / Previous Track Button]: Located on the right earcup. Press to decrease volume, press and hold to skip to the previous track.

[Microphone]: Integrated into the earcup for phone calls.

[3.5 mm AUX Port]: Located on the left earcup. Allows connection to devices via a 3.5 mm AUX cable.

[Charging Port]: Located on the left earcup. Used for charging the headphones via the included Micro-USB cable.

Getting Started

Connecting with a 3.5 mm AUX Cable

To use the headphones with a device that does not support Bluetooth, or if the battery is depleted, you can connect them using the included 3.5 mm AUX cable. Plug one end of the cable into the 3.5 mm AUX port on the headphones and the other end into the audio output port of your media device.

In audio mode, all playback and volume adjustment will be controlled by your connected device.

[Diagram: Headphones connected to a laptop via a 3.5mm AUX cable.]

Charging the Headphones

Plug the small connector of the included USB charging cable into the charging port on the headphones. Plug the other end into a USB port on a computer or a compatible USB adapter. The headphones' LED indicator will turn SOLID RED while charging and turn OFF when fully charged. On low battery, a voice will be heard, notifying that the headphones need to be charged.

[Diagram: Headphones connected to a computer via a USB cable, showing a red LED indicator.]

Powering ON/OFF

Press and hold the [O] button for approximately 3-5 seconds to power the headphones ON or OFF. When powering ON, a voice will be heard, and the headphones will enter Bluetooth pairing mode. They may automatically pair to the last paired device with Bluetooth enabled.

[Diagram: Person pressing the [O] button on the headphone.]

Playing Music

To listen to music or the headphones, you must first be paired via Bluetooth to your audio device. Refer to the "Bluetooth Pairing" section for instructions.

In Bluetooth mode, playback and volume can be adjusted with the on-ear controls, or with your paired device.

Bluetooth Pairing

Power the headphones ON. A voice will be heard and the LED indicator will flash BLUE and RED.

Turn on your device's Bluetooth and select "BSBTH250" from the list of available Bluetooth devices.
After successful pairing, a voice will be heard and the LED indicator will flash BLUE.