RZ07 Smart Lock

User Guide

• At a Glance: Provides an overview of the smart lock's components.

• How to Lock / Unlock: Instructions on locking and unlocking the door from both inside and outside, including Auto Lock and Manual Mode.

• Definitions: Explains key terms and features such as Master Code, Auto Lock, One-touch Lock, Private Mode, Wrong Entry Limit, Passage Mode, and Anti-peeping password.

Installation Instruction

• STEP 1: Prepare the door and check dimensions: Details on measuring door holes, backset, and door thickness to ensure compatibility.

• STEP 2: Install the latch and strike: Instructions for installing the latch and strike plate, including how to adjust the latch for different backsets.

• STEP 3: Install exterior assembly: Steps for mounting the exterior part of the smart lock, including routing cables and securing the mounting plate.

• STEP 4: Install interior assembly: Instructions for installing the interior assembly, including battery installation and setting the door handedness.

• Factory Default Settings: Information on how to reset the lock to factory defaults and a table of default settings.

• Programming Guide: Step-by-step instructions for changing the master code, adding/deleting user codes and cards, and adding/deleting fingerprints.

• Troubleshooting: Answers to common questions regarding lock functionality, thumb turn operation, latch issues, and battery replacement.

Information & Safety Warnings

• Protect your User Codes and Master Code.

• Restrict access to your lock's interior assembly and routinely check your settings.

• Do not use an electric screwdriver during installation.

• This manufacturer advises that no lock can provide complete security by itself.

• This lock may be defeated by forcible or technical means.

• No lock can substitute for caution, awareness of your environment, and common sense.

• Care should be taken to ensure a long-lasting finish. Use a soft, damp cloth for cleaning.

• The lock is water resistant but avoid letting water and liquids get into the lock.

• Avoid exposure to direct sunlight, as long-term exposure may damage the lock.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ISED Statement

English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES - 3 (B)/NMB - 3(B).

French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés de licence d'Innovation, Sciences et Développement économique Canada.

L'exploitation est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil.

l'appareil numérique du ciem conforme canadien peut - 3 (b) / nmb - 3 (b).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies pour un environnement non contrôlé.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.