Baby Trend Nursery Center - Instruction Manual

Product Information

Brand: Baby Trend

Contact: 1-800-328-7363 | www.babytrend.com

*Toys and mobile may vary.

Warranty

English: DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR. The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or with an altered/removed serial number, invalidates all claims. Damage to property during installation is the end user's sole responsibility. Contact Customer Service at 1 (800) 328-7363 (Monday-Friday, 8:00 a.m. - 4:30 p.m. PST). Return Authorizations are required. Visit http://babytrend.com/pages/limited-warranty for details.

Spanish: NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A BABY TREND® PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION. La garantía de Baby Trend® cubre defectos de fábrica por 1 año después de la compra. Cualquier producto sometido a uso inadecuado, abuso, uso anormal, desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental, alteración o accidente, o con número de serie alterado o removido, anula todos los reclamos. Cualquier daño a la propiedad durante la instalación es responsabilidad exclusiva del usuario final. Contacte al Departamento de Servicio al Cliente al 1 (800) 328-7363 (Lunes a viernes, 8:00 a.m. - 4:30 p.m. PST). Se requiere Autorización de Devolución. Visite http://babytrend.com/pages/limited-warranty para detalles.

Important Safety Warnings

⚠️ WARNING: Failure to follow instructions could result in serious injury or death.

Infant Suffocation Hazard

• In gaps between a mattress too small or too thick and product sides.
• On soft bedding.
• NEVER add a mattress, pillow, comforter, or padding. Use only the mattress provided by Baby Trend®.
• The playard mattress/pad is designed to prevent suffocation. Using a thicker or different sized mattress/pad may allow a child's head to get trapped, causing suffocation.
• To reduce the risk of SIDS, place infants on their back to sleep, unless advised otherwise by a physician.
• NEVER use plastic shipping bags or other plastic film as mattress covers.
• NEVER use a water mattress.

Strangulation Hazard

• NEVER LEAVE INFANT IN PRODUCT WITH SIDES DOWN. Infant may roll into space between pad and loose mesh side, causing suffocation.
• Strings can cause strangulation! NEVER place items with strings around a child's neck (e.g., hood strings, pacifier cords). NEVER suspend strings over the playard or attach strings to toys.
• NEVER place the product near a window where blind/drape cords can strangle a child.
• NEVER add improvised netting or covers to confine a child in the playard, as this can lead to entrapment and death.
• NEVER leave child in product with sides lowered. Ensure sides are raised and locked.

General Safety Warnings

• The playard, including side rails, must be fully erected and latches secure before use.
• Discontinue use when child can climb out, reaches 35 in. (890 mm), or weighs 30 lb. (14 kg).
• When child can pull to stand, remove bumper pads, large toys, and other objects that could serve as steps.
• ALWAYS provide supervision. Never leave child unattended when playing. Child in crib must be supervised at all times.
• ALWAYS ensure the playard is safe by checking all parts are properly secured before use.
• NEVER leave the full-size bassinet in place when a child is in the playard.
• Only one child can use the Playard/Nursery Center at a time.
• NEVER use if any fasteners are loose/missing, joints are loose, parts are broken, or mesh/fabric is torn. Contact Baby Trend Customer Service for parts/repair. NEVER substitute parts.
• This product is not intended for commercial use.

Accessory Warnings (Bassinet, Toybar, etc.)

• Follow all accessory warnings carefully.
• For Bassinets: Check security, avoid strangulation hazards from strings, never use plastic film as covers, use with one child only, never place child under bassinet, ensure bassinet is fully assembled and installed, never leave bassinet in place when child is in playard, discontinue use at 25 in. (635 mm), 15 lbs (6.8 kg), or 3 months old.
• For Toybar/Mobile/Canopy: Keep out of reach, remove when baby pushes up on hands/knees (use birth to 5 months recommended), toys not for mouthing, attach fasteners tightly, do not add extra strings, intended for visual stimulation only.

Parts List

This model may not include all features shown. Check parts list on back cover before assembly.

• Playard
• Full-Size Bassinet with metal support tubes (optional)
• Mattress
• Premium Pocket Organizer (optional)
• Diaper Stacker (optional)
• Travel/Storage Bag
• Fixed Mobile (optional)

Assembly Instructions

To Assemble Playard

1. Unzip bag and remove Playard frame (Fig. 1). Undo fasten straps and set Mattress aside. DO NOT push center down yet.
2. Erect all four (4) top rails fully. Pull up one rail at a time, holding each side, and pull sharply. Do not pull from the middle where the center latch release is. Ensure both tubes latch and each rail is rigid (Fig. 2). IMPORTANT: The center handle MUST remain raised (approx. 45.7 cm / 18 inches) while locking side rails. If the center is not raised, rails will NOT lock. If one side locks but the other doesn't, unlock the rail by squeezing the center release and try again.
3. Once all four (4) top rails are locked, push down on the center handle (Fig. 3a). The center mechanism will automatically lock. IMPORTANT: Test each top rail by pushing down slightly to confirm rigidity and secure placement before use (Fig. 3b).
4. Place the Mattress on the Playard floor with the padded side facing up (Fig. 4).
5. Insert the hook and loop fastener from the Mattress underside through the floor slots at each end of the Playard. Fasten straps to the underside of the Playard floor to prevent Mattress movement (Fig. 5a, 5b).
6. To operate wheel brakes, press downward on brake levers. To release, lift upward on the lever (Fig. 6).

Folding Playard

1. Release hook and loop fastener holding Mattress from Playard floor or Bassinet; set Mattress aside.
2. Do not unlock top rails yet; center of floor must be raised before top rails unlock.
3. Rotate the center handle counter-clockwise 90 degrees and raise the center as high as the top rails (Fig. 7). Gather Legs and Wheels together towards the center so they nearly touch.
4. Locate the rail latch release in the center and bottom side of each rail. Squeeze the lever with two hands until the rail releases the two tubes (Fig. 8a), then push down (Fig. 8b). NOTE: If top rail(s) do not release completely, DO NOT FORCE! Lift the center of the floor higher. Both tubes must be released for the top rail to fold.
5. Gather four (4) corners and center all together tightly (Fig. 9). Wrap Mattress around Playard frame with padded side facing inward.
6. Secure the hooks and loop straps by feeding them through the loops on the Mattress end and folding them back onto themselves (Fig. 10). Place folded Playard into carry bag with the handle through the zipper opening.

To Assemble Full-Size Bassinet

ATTENTION: Playard must be fully assembled and locked before installing the bassinet. Remove mattress from Playard to use inside bassinet.

1. Connect opposing Mattress Support Tubes attached to the Bassinet bottom (Fig. 11a). Ensure tubes are connected before placing Mattress into Bassinet (Fig. 11b).
2. Position the Bassinet over and down into the assembled Playard. Secure by pushing down firmly on each plastic support clip until snapped into place (Fig. 12).
3. Place the Mattress into the Bassinet with the padded side facing upward (Fig. 13).

To Remove Full-Size Bassinet: Remove Mattress, disconnect Mattress Support Tubes, unsnap clips, and lift Bassinet.

Diaper Stacker Assembly (if equipped)

1. Connect the Diaper Stacker to the Playard by sliding the two (2) connecting clips over an open portion of the top rail (Fig. 14). NOTE: Install only on open sides where clips attach easily without interference.

Premium Pocket Organizer Assembly (if equipped)

1. Connect the Premium Pocket Organizer to the Playard by sliding the two (2) connecting clips over an open portion of the top rail (Fig. 15). NOTE: Install only on open sides where clips attach easily without interference.

Mobile Assembly

ATTENTION: Mobile is for visual stimulation, not grasping. Remove when baby pushes up on hands/knees. Attach fasteners tightly. Do not add extra strings.

1. Insert Mobile Lower Arm (a) into Mobile Arm Holder (b) until locked (Fig. 15).
2. Insert Mobile Upper Curved Arm (c) into Mobile Lower Arm (a, b) until locked (Fig. 16).
3. Snap Mobile Tri-shaped Arm (d) onto the end of the Upper Curved Arm (a, b, c) (Fig. 17). Connect Toys (e) by threading string into the slot at the end of each arm.
4. Insert the bottom of the Mobile Arm into the Playard frame (Fig. 18).

Maintenance and Cleaning

• Use only household mild soap and warm water.
• DO NOT USE BLEACH.
• DO NOT MACHINE WASH.

Customer Service

Contact Baby Trend Customer Service at 1 (800) 328-7363, Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s).