SpeedoHealer CAN Supplementary Manual

Preparation

Secure the bike on a stand.

Remove the seats.

Remove the side fairings.

Remove the fuel tank.

Locate the ABS connector under the fuel tank.

[Image Description: A motorcycle is secured on a stand. Subsequent images show the motorcycle with its fuel tank removed, revealing internal components, and a close-up of the ABS connector area.]

Wiring Connections

Step 1: Green/Blue Wire

Cut the Green/Blue wire about 2.5cm (1") from the connector.

Connect the SH Green wire to the Green/Blue wire end that goes to the ABS module. Use a yellow butt connector.

Connect the SH Blue wire to the Green/Blue wire end that is at the wiring harness side. Use a yellow butt connector.

[Image Description: Close-up of motorcycle wiring harness showing the Green/Blue wire being cut and connected using yellow butt connectors to the SH Green and SH Blue wires.]

Step 2: Yellow/Blue Wire

Cut the Yellow/Blue wire about 2.5cm (1") from the connector.

Connect the SH White wire to the Yellow/Blue wire end that goes to the ABS module. Use a yellow butt connector.

[Image Description: Close-up of motorcycle wiring harness showing the Yellow/Blue wire being cut and connected using a yellow butt connector to the SH White wire.]

Step 3: Additional Connections

Connect the SH Yellow wire to the Yellow/Blue wire end that is at the wiring harness side. Use a yellow butt connector.

Splice the SH Red wire to the Grey/Pink wire of the ABS connector. Use a red wire tap connector.

Splice the SH Black wire to the Black wire of the fan connector. Use a red wire tap connector.

[Image Description: Close-up of motorcycle wiring harness showing connections being made with yellow butt connectors and red wire tap connectors to various wires, including Grey/Pink and Black wires.]

Final Installation

Typical position for the SpeedoHealer CAN.

Secure the unit properly.

[Image Description: A view of the SpeedoHealer CAN unit installed on the motorcycle, showing its typical placement and how it is secured.]