EJEAS V6 Pro+ 6-Riders Motorcycle Helmet Intercom System

Product Function

The EJEAS V6 is a performance-stable Helmet Bluetooth Intercom system designed for motorcycle riders. It offers a maximum talking distance of 800 meters, with typical outdoor ranges between 300 to 800 meters. It also functions as a high-performance Bluetooth headset with a range of 10 meters.

Key features include automatic-receive phone calls for enhanced convenience and safety. The device utilizes a modern production process and ultrasonic structure without screws, making it waterproof and equipped with HD-Voice technology. It is engineered to ensure safe riding.

Device Buttons Overview

The main intercom unit features several buttons for operation:

• 1. MOTOR/A button: Used for powering the device on and for pairing/connecting with device A.
• 2. B button: Used for pairing/connecting with device B.
• 3. C button: Used for pairing/connecting with device C.
• 4. D button: Used for pairing/connecting with device D.
• 5. E button: Used for pairing/connecting with device E.
• 6. Phone button: Manages phone calls, music playback, and voice assistant functions.
• 7. Volume +: Increases the volume and navigates music tracks.
• 8. Volume -: Decreases the volume and navigates music tracks.
• 9. Power off: Function to turn off the device.
• 10. Antenna: For wireless communication.
• 11. Earphone interface / USB charger interface: Connects to earphones and for charging the device.

Installation Diagram

The installation process involves attaching the main intercom unit to a motorcycle helmet, typically using a clip or adhesive mount. The microphone and speakers are then connected to the intercom unit and positioned inside the helmet for optimal audio and communication. Cables are managed for a secure and tidy setup, ensuring the device is ready for use.

Phone Operation

Powering On/Off

• Power On: Long press the MOTOR button for approximately 2 seconds, then release. The main device light will flash.
• Power Off: Press the Power off button (or long press the MOTOR button).

Connecting to Phone (GPS/MP3)

• Long press the Phone button for 5 seconds until the red and blue lights flash alternately.
• Turn on your phone's Bluetooth, search for "V6", and connect.
• Successful pairing is indicated by the intercom's blue light flashing. This process is also applicable if your GPS/MP3 device supports Bluetooth.

Last Number Redial

• After connecting your phone, long press the Phone button for 3 seconds. The device will automatically dial the last called number.

Receiving a Call

• When a call is received, the phone will automatically answer after 5 seconds if no operation is performed.

Refusing a Call

• When a call is received, press the Phone button to end the call.

Music Playback

• Play/Suspend Music: Short press the Phone button. This function is compatible with most cellphone music playback.
• Choose Music:
  • Previous music: Long press Volume - for 2 seconds.
  • Next music: Long press Volume + for 2 seconds.

Volume Control

• Increase volume: Press Volume +.
• Decrease volume: Press Volume -.

Charging

• Charging Tip: The red light remains on while charging. It turns off once the device is fully charged.

Clear Pairing (Restore Factory Settings)

• Press the Phone button and the B button simultaneously. The indicator light will flash red three times, followed by a single blue flash.

Intercom Operation

Pairing and Talking

The V6 supports use by up to six riders, with two riders able to talk simultaneously. One main device can be paired with up to five sub-devices (labeled A, B, C, D, E). The main device can only communicate with one sub-device at a time. To switch between paired sub-devices, press the corresponding button (MOTOR/A, B, C, D, or E) on the main device. Sub-devices cannot communicate directly with each other.

Pairing Procedure

• Pairing with A device: Long press the MOTOR buttons on both the main device and the A device for approximately 5 seconds. Both devices' lights will flash red and blue. Once they detect each other, pairing will initiate automatically, indicated by the blue light flashing quickly. A slow, simultaneous blue light flash signifies a successful connection for normal talk. To pair the next sub-device, disconnect the current connection by pressing the MOTOR buttons first.
• Pairing with B device: Long press the B buttons on both the main device and the B device for approximately 5 seconds. Both devices' lights will flash red and blue. After detection, pairing starts automatically (blue light flashes quickly), followed by a slow, simultaneous blue light flash for normal talk. To pair the next sub-device, press the B buttons first to disconnect.
• Devices C, D, and E can be paired using the same procedure, pressing their respective C, D, and E buttons on the main device.

Simplified Operation

The MOTOR/B/C/D/E buttons on the main device are used for pairing with the corresponding buttons on the five sub-devices. After pairing, simply press the relevant button on the main device to connect and talk with a specific sub-device. For example, to talk to sub-device A, press the MOTOR button; to talk to sub-device B, press the B button. Subsequent connections do not require re-pairing; just press the button to establish communication.

Precautions for Use

1. Ensure correct installation. In rainy conditions, make sure the headphone jack is fully inserted into the devices to prevent water ingress.
2. To maintain battery life, use the standard charger provided.
3. For rider safety, it is not recommended to listen to music while actively riding.
4. While riding, avoid manually operating the device buttons to maintain focus on safety.
5. To ensure optimal communication distance, it is recommended to use the device in open areas.

EUC Remote Controller (Optional)

Buttons Introduction

EUC Pairing Process

Follow these steps to pair the EUC (EJEAS Universal Controller) with the intercom system:

1. Clear Pairing Record: Long press both the <Button FM> and <Volume -> buttons on the EUC for 5 seconds. The red and blue lights will illuminate simultaneously.
2. Enter Handle Pairing Mode: Long press both the <Phone Button> and <Button E> for 5 seconds. The red and blue lights will flash alternately and quickly.
3. Initiate Pairing: Click any button on the EUC.

Pairing Success: The system will announce "Du" upon successful pairing. If the EUC cannot be paired within 2 minutes, it will automatically exit the pairing mode.

Restore Default Settings

To reset the EUC to its default settings:

• Press and hold both the <B button> and <Phone button> for approximately 2 seconds.
• The red light will flash 3 times quickly, indicating that the pairing record has been deleted.
• The intercom will then automatically power on again. This action is confirmed by a "Di, Di, Di" sound.

Mobile App Integration

Setup and Connection

The EJEAS V6 can be managed via the SafeRiding mobile application.

1. Download and Install: Download and install the SafeRiding mobile app for the first time. (Note: QR code for download is omitted).
2. Activate Pairing Mode: Press and hold the <Phone Button> for approximately 5 seconds until the red and blue lights flash alternately.
3. Connect via App: Open the SafeRiding app. Click the Bluetooth icon (usually in the top right corner). The app will display searched intercom devices. Select your EJEAS V6 intercom and click to connect.

Note for iOS users: You may need to enter your phone's Bluetooth settings again to connect the audio Bluetooth.

Subsequent Connections: To connect on future uses, simply open the app, click the Bluetooth icon, and select the intercom from the list of paired devices.

App Features

The SafeRiding app provides various functionalities, including intercom group management, music control, FM radio control, device power off, authenticity checks, and other features.

Regulatory Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.