EJEAS V6pro User Manual

Product Overview

The EJEAS V6pro is a performance-stable Helmet Bluetooth Intercom system designed for motorcycle riders. It offers a maximum talking distance of 800 meters in open environments and approximately 300 meters in general outdoor conditions. It also functions as a high-performance Bluetooth headset with a range of 10 meters.

Key features include automatic call receiving, a waterproof design, HD-Voice, and a screw-less ultrasonic structure. It is designed for safe and convenient riding.

Device Components:

• 1. MOTOR/A button (Power on)
• 2. B button
• 3. C button
• 4. D button
• 5. E button
• 6. Phone button
• 7. Volume +
• 8. Volume -
• 9. Power off
• 10. Antenna
• 11. Earphone interface / USB charger interface

Installation Diagram

The installation involves attaching the intercom unit to the helmet and connecting the earphones. Specific steps are illustrated in the manual, showing how to secure the unit and plug in the earphone interface.

Operation of Phone

1. Power on/Power off: Long press the MOTOR button for about 2 seconds to power on. The main device light will flash. To power off, press the Power off button.
2. Connect with phone (GPS/MP3): Long press the Phone button for 5 seconds until the red and blue lights flash. Turn on your phone's Bluetooth, search for the V6, and connect. A successful pairing is indicated by the intercom's blue light flashing. This process is similar for GPS/MP3 devices with Bluetooth functionality.
3. Last number redial: After connecting your phone, long press the Phone button for 3 seconds to automatically redial the last called number.
4. Receiving a call: Calls are automatically received after 5 seconds of no operation.
5. Refuse a call: Press the Phone button to end an incoming call.
6. Play/Suspend music: Short press the Phone button to play or pause music (compatible with most cellphone music players).
7. Volume control: Press Volume + to increase volume and Volume - to decrease volume.
8. Choose music: Long press Volume - for 2 seconds for the previous music track. Long press Volume + for 2 seconds for the next music track.
9. Charging tip: The red light is on while charging and turns off when fully charged.
10. Clear pairing (Restore factory settings): Press and hold the Phone button and B button simultaneously. The indicator light will flash red three times and then blue once.

Operation of Intercom

The V6 supports communication among up to six riders, with two riders able to talk simultaneously. One main device can be paired with up to five sub-devices (A, B, C, D, E). The main device can switch between communicating with these sub-devices by pressing the corresponding MOTOR/B/C/D/E buttons.

Note: The main device cannot communicate with all five sub-devices at the same time; it can only connect to one at a time. The five sub-devices cannot communicate with each other.

Pairing with Devices:

• Pairing with A device: Long press the MOTOR buttons of the main device and A device for 5 seconds. Both devices will flash red and blue lights. Once found, they initiate pairing. The blue light flashes quickly, then slowly, indicating a successful connection. To pair the next sub-device, disconnect the current one by pressing the MOTOR buttons first.
• Pairing with B device: Long press the B buttons of the main device and B device for 5 seconds. Similar to A device pairing, they flash red and blue, initiate pairing, and indicate connection with flashing blue lights.
• Pairing with C, D, E devices: These devices follow the same pairing procedure as devices A and B, using their respective C, D, and E buttons.

Simplified Pairing: The MOTOR/B/C/D/E buttons on the main device are used for pairing with the corresponding buttons on the five sub-devices. After pairing, press the respective buttons on the main device to connect and talk with the sub-devices.

Example: To talk to sub-device A, press the MOTOR button on the main device. To talk to sub-device B, press the B button on the main device.

Note: For subsequent uses, simply click the relevant button (MOTOR/B/C/D/E) on the main device to connect and talk without needing to re-pair.

Precautions for Use

1. Install correctly. Ensure the headphone jack is fully inserted, especially during rain, to prevent water ingress.
2. Use the standard charger to ensure battery longevity.
3. For riding safety, listening to music is not recommended while riding.
4. Avoid manually operating the device buttons while riding to maintain focus on safety.
5. For optimal communication distance, use the device in open areas.

EUC Remote Controller (Optional)

Buttons Introduction

EUC Pairing

1. Clear Pairing Record: Long press both <Button FM> and <Volume -> for 5 seconds. The red and blue lights will be on simultaneously.
2. Enter Handle Pairing Mode: Long press both <Phone Button> and <Button E> for 5 seconds. The red and blue lights will flash alternately and quickly.
3. Initiate Pairing: Click any button on the EUC.

Pairing Successfully: A "Du" sound is heard. If pairing is not successful within 2 minutes, the mode will automatically exit.

Restore Default Settings

Press and hold both the <B button> and <Phone button> for approximately 2 seconds. The red light will flash 3 times quickly to delete pairing records, and the intercom will automatically power on.

Indicator: 3 Quick Flashes, accompanied by "Di, Di, Di" sound.

Mobile App

1. Download and Install: Download and install the SafeRiding mobile app for the first time. QR codes are provided for iOS and Android.
2. Initiate Pairing: Press and hold the <Phone Button> for approximately 5 seconds until the red and blue lights flash alternately.
3. Connect via App: Open the app, click the Bluetooth icon, select the intercom device from the list, and connect. For iOS, you may need to pair via phone settings (Settings > Bluetooth) to connect audio Bluetooth.

Subsequent Use: Open the app, click the Bluetooth icon, and select the intercom for connection from the paired devices.

The app provides functions such as intercom group management, music control, FM control, switching off the device, checking authenticity, and more.

Regulatory Information

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.