Nova Series LED High Bay Light
Product Specifications
| Feature | Specification | Feature | Specification |
|---|---|---|---|
| Wattage | 150W; 200W | Beam Angle | 110° |
| Color Temperature | 5000K | Power Factor (PF) | >0.9 |
| Efficacy | 130LM/W | Light Decay | <5% |
| Dimming | Dimmable | Certification | UL Listed |
| Input Voltage | 120V | Operating Temperature | -22° F - 122° F |
| Lumens | 19500LM; 26000LM | Lifespan | 50,000 hours |
| CRI | >80 | Warranty | 5 Years |
| Housing Materials | Aluminum | Housing Color | Black |
Product Overview
The Nova series LED high bay light is designed for efficient and reliable illumination. The fixture has a diameter of 11.02 inches and a height of 5.51 inches. It features an ultra-thin design.
Key components include:
- US Hook: A robust hook for mounting.
- 5.9FT Cable with 3-prong plug: A durable power cord for connection.
Key Advantages
- UL cUL certificate.
- Uses Lumileds or Bridgelux Chip for high CRI.
- Input voltage: 120VAC.
- No UV or IR radiation in the beam.
- Easy to install and operate.
- Energy saving with a long lifespan.
- Provides soft, uniform light that is safe for eyes.
- Instant start, with no flickering or humming.
- Green and eco-friendly, mercury-free design.
Installation Instructions
Cautions:
- Do not use an electric generator to test the LED light.
- Adhere to all relevant country, regional, and local laws and regulations during installation.
- Always turn off the power before installation or maintenance.
- Proper earth grounding is required to ensure safety.
Notice:
- Installation personnel must possess professional electrical knowledge to avoid electrical shock or fire hazards.
- Wear gloves to prevent injury during installation.
- If smoke or sparks are observed, immediately turn off the power and notify relevant personnel.
- The luminaire should be mounted directly below an outlet or junction box.
- The power cord must be visible along its entire length and cannot be concealed.
Attention:
- Check for any shipping damage and contact the manufacturer promptly if found.
- Carefully read the installation instructions and verify all accessories are complete before proceeding with installation.
Wiring Diagram & Instruction:
The power cord is 1.8m (5.9ft) long. The input voltage is 120V.
Installation Methods: Hook Mount
(Please choose the most suitable installation method for the purchased product as per your needs.)
A. Hook Mount:
- Screw the lifting ring into the high bay light fixture and tighten firmly. (Refer to Figure 1)
- Hang the fixture using a lifting hook or chain, ensuring it is protected from falling. (Refer to Figure 2)
- After installation, wire the fixture in accordance with local connection standards, ensuring good joint protective measures.
Figure 1 depicts the process of screwing the lifting ring into the fixture. Figure 2 illustrates the fixture being hung and connected to a 120V power source.
