Shokz OpenSwim S700 User Guide
Welcome to the user guide for your Shokz OpenSwim S700 headphones. This guide provides comprehensive instructions on how to use, maintain, and troubleshoot your device.
How It Works
This section covers the fundamental operations and features of your OpenSwim headphones.
Headphone Controls
The OpenSwim headphones feature several controls for managing your audio and device settings:
- LED Indicator: A small light that displays the device's status (e.g., flashing blue for power on, flashing red for power off).
- Terminals: Four small circular contact points used for charging the headphones.
- Volume - Button: Press this button (marked with a minus sign ➖) to decrease the volume.
- Volume + Button: Press this button (marked with a plus sign ➕) to increase the volume.
- Mode Button: Labeled 'M', this button is used for switching EQ modes and other functions.
- Multifunction/Power Button: A larger button used for powering the device on/off, playing/pausing music, and other primary operations.
ON/OFF
To turn on the headphones: Press and hold the Multifunction/Power Button until the LED Indicator flashes blue. You will hear Audrey say, "Welcome to Shokz".
To turn off the headphones: Press and hold the Multifunction/Power Button until the LED Indicator flashes red. You will hear Audrey say, "Power off".
Transferring Content
You can load your music onto the OpenSwim headphones by connecting them to your computer.
Steps:
- Connect the OpenSwim to your computer using the USB Charging Cradle.
- The OpenSwim will appear as a removable hard drive named "OpenSwim". Open this drive on your computer.
- Drag and drop audio files or folders into the "OpenSwim" drive.
- Once file transfer is complete, you can disconnect the USB Charging Cradle. The LED indicator may flash red and blue while the OpenSwim organizes the files. During this process, the OpenSwim buttons are temporarily non-functional.
OpenSwim supports MP3, WMA, FLAC, WAV, and AAC audio formats. Note that it only supports WAV files in Linear PCM format.
How to Wear
Proper fit is essential for comfort and performance. Follow these steps:
- Pick up the headphones and bring the band behind the base of your neck.
- Position the earhooks comfortably over your ears.
*Wearing your headphones incorrectly may cause discomfort. Ensure the transducers rest in front of your ears.
Volume
Operate volume controls while audio is playing.
To change volume: While audio is playing, adjust the headphone volume by pressing either the Volume + (➕) or Volume - (➖) buttons. A "beep" sound indicates when the volume has reached its maximum level.
⚠️ Listening with headphones at high volume for extended periods may affect your hearing and the audio quality.
Music Function
Control your music playback using the headphone buttons:
- Play/pause music: Click the Multifunction/Power Button once. [▶️]
- Next song: Press and hold the Volume + (➕) button for 2 seconds while music is playing. [⏭️]
- Previous song: Press and hold the Volume - (➖) button for 2 seconds while music is playing. [⏮️]
- Change EQ Setting: Press and hold the Mode Button (⚙️) for 2 seconds.
- Play mode: Click the Mode Button (⚙️) once to cycle through "Normal", "Repeat", and "Shuffle" modes.
Check Battery Status
Operate controls while audio is not playing.
To check battery status: Click the Volume + (➕) or Volume - (➖) button while music is paused. Audrey will announce the battery status (e.g., "Battery high", "Battery medium", "Battery low", "Charge me").
Extra Features
Explore additional functionalities of your OpenSwim headphones.
EQ Modes
The OpenSwim headphones offer different Equalizer (EQ) modes to enhance your listening experience:
- General Mode: Balanced frequency for listening to music. [?]
- Swimming Mode: Optimized for use while swimming. [?]
Switching EQ Modes
Operate controls while music is playing.
To switch EQ mode: Press and hold the Mode Button (⚙️) while music is playing until you hear a beep. Audrey will announce the selected mode, such as "General mode" or "Swimming mode".
Changing Languages
Your headphones have four built-in languages: Chinese (中文), English, Japanese (日本語), and Korean (한국어).
To change the language: Press and hold both the Volume + (➕) and Volume - (➖) buttons simultaneously until you hear a beep. Audrey will announce the selected language.
Change the Folder
It is recommended to use different folders to categorize your music for easier management.
To change the folder:
- Press and hold both the Multifunction/Power Button and the Volume - (➖) button until you hear a beep. Audrey will say, "Play Current Folder" or "Play All Folders".
- To select the "Next folder", press and hold the Volume + (➕) button and the Multifunction/Power Button simultaneously for 2 seconds after you hear "Play Current Folder". You will then hear, "Next folder".
Care and Maintenance
Proper care ensures the longevity and performance of your OpenSwim headphones.
Charging Tips
The headphones will automatically shut down when charging.
Charging Procedure:
- Attach the OpenSwim to the USB Charging Cradle. Ensure the Pogo Pins on the cradle make firm contact with the Terminals on the headphones.
- Connect the USB Charging Cradle to a computer or a compatible power adapter.
- The LED indicator on the headphones will turn blue when charging is complete.
Storage and Maintenance
Preventing Hearing Loss: Listening to music at high volume for extended periods can affect hearing and cause sound distortion. Use moderate volumes.
Storage Conditions:
- Store the headset in a cool, dry place at a temperature between 0-45°C (32-113°F).
- Avoid using or storing the headset under extremely cold, hot, humid conditions, or at extremely low pressure, as this may shorten battery life.
- Do not expose the headset to heat sources, direct sunlight, or combustible gases.
- Avoid exposing the headset to liquids other than fresh water, sweat, and pool water.
- Exposure to sea water or saline water may lead to charging contact corrosion.
- The headset has an IP68 liquid and dust resistance rating. Do not use it when diving deeper than 2 meters.
- Periodically remove any residue that may accumulate on the headset.
- If the charging contacts become wet, dry them with a soft, dry towel and allow the headset to air dry at room temperature until no moisture remains before charging.
- The USB charging cradle is not waterproof. Do not use it if your hands or the headset are wet.
- After long-term storage, charge the headset fully before use.
Note: Product design and specifications are subject to change without prior notice. For the latest information, visit www.shokz.com.
Notes on Use:
- The headset will automatically shut off after one hour of inactivity.
- OpenSwim supports MP3, WMA, FLAC, WAV, and AAC formats. WAV files are supported only in Linear PCM format.
- Nominal capacity refers to the product specification. Actual available storage space may be less due to differences in computing methods and built-in functions. The actual storage space prevails.
- Before swimming, ensure the headset is worn properly and securely to prevent it from falling off during strenuous movement.
- The headset includes professional silicone swimming earplugs. If irritation occurs, discontinue use and consult a medical professional.
Warranty
Your headphones are covered by a warranty.
To avoid dangers such as explosion, fire, or toxic chemical spills, do not attempt to disassemble, replace, deform, or destroy the battery yourself. If the battery is replaced improperly, the headset may explode. It should only be replaced with a battery of the same type or equivalent performance.
Do not expose the battery to sunlight, fire, or intense heat. Do not subject the battery to disassembly, shock, excessive pressure, or fire. If the battery shows signs of serious swelling, stop using it immediately and do not expose it to high temperatures.
Please be aware that in some regions, using this product while driving or cycling may be subject to regulations. Check and comply with local traffic regulations and laws, or consult local authorities.
Some individuals may experience reactions to specific materials. Prolonged contact with potentially irritating substances (like soap, sweat, UV protection products, or body lotion) or exposure to certain environments may lead to skin allergic reactions. To minimize the risk of skin irritation, avoid wearing the product on body parts with existing skin injuries.
If your skin becomes red, swollen, itchy, or exhibits any other irritating reaction, remove the headset immediately and consult a doctor.
Use only the manufacturer-approved USB charging cradle. Unauthorized cradles may not meet safety standards and could lead to user injury or device damage. Only use power supplies approved by relevant departments and meeting local regulatory requirements (e.g., UL, CSA, VDE, CCC).
Visit our website at https://www.shokz.com/pages/warranty-claim for details of the limited warranty.
*Failure to register will not affect your limited warranty rights.
Troubleshooting
If you encounter any issues or problems with your OpenSwim headphones, please visit our support page for assistance:
What's in the Box
Your Shokz OpenSwim package should contain the following items:
- OpenSwim Box
- OpenSwim headphones
- OpenSwim Package
- OpenSwim User Guide
- OpenSwim Legal Statement
- OpenSwim Earplugs
- USB Charging Cradle
If any part of your product is damaged or missing, do not use it. Contact an authorized Shokz dealer or Shokz customer service.
*Please note that the packaging may vary depending on the sales region.
Regulatory and Legal Information
This section provides important declarations and compliance information.
CE Declaration of Conformity
Shokz Holding Limited declares that this product complies with the essential requirements and other relevant provisions of Directive 2014/30/EU and other applicable EU Directive requirements. The complete declaration of conformity can be found at: https://shokz.com/pages/policies. Shokz's EU representative is AfterShokz Euro B.V., Schipholweg 103, 2316XC Leiden, The Netherlands.
CE
UK Declaration of Conformity
Shokz Holding Limited declares that this product complies with the essential requirements and all other applicable United Kingdom's regulations. The complete declaration of conformity can be found at: https://shokz.com/pages/policies. Shokz's authorized representative in the UK is Pinpoint Consumer Electronics Ltd., Unit 35, Meridian House, Road One, Winsford Industrial Estate, Winsford, Cheshire CW7 3QG.
UK CA
WEEE Declaration of Conformity
The WEEE logo [♻️] indicates that this product must not be discarded as household waste. It should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on disposal and recycling, contact your local municipality, disposal service, or the retailer where you purchased the product.