OPENSWIM S700

Headphone Controls

The headphones feature an LED indicator, terminals for charging, volume up Volume + ➕ and down Volume - ➖ buttons, a Mode Button Ⓜ️, and a Multifunction/Power Button ?.

Diagram Description: The headphones are depicted from the side. Key components labeled are: 'LED Indicator' (a small colored light), 'Terminals' (four circular contact points), 'Volume -' (a button with a minus sign), 'Volume +' (a button with a plus sign), 'Mode Button' (labeled 'M'), and 'Multifunction/Power Button' (a circular button with a green circle inside).

ON/OFF

Use the Multifunction/Power Button ?.

To turn on the headphones: Press and hold the Multifunction/Power Button ? until the LED Indicator flashes blue. Audrey will say: "Welcome to Shokz".

To turn off the headphones: Press and hold the Multifunction/Power Button ? until the LED Indicator flashes red. Audrey will say: "Power off".

Diagram Description: A close-up view of the Multifunction/Power Button, showing the green circle indicator.

Transferring Content

Steps:

1. Connect OpenSwim to your computer using the USB Charging Cradle.
2. OpenSwim will appear as a hard drive named "OpenSwim" on your computer. Open this drive.
3. Drag-and-drop audio files or folders into the "OpenSwim" hard drive.
4. You may disconnect the USB Charging Cradle once file transfer is complete. The LED indicator will flash red and blue while OpenSwim organizes the files. The OpenSwim buttons are not functional temporarily during this process.

OpenSwim supports the following audio formats: MP3, WAV, WMA, FLAC, AAC. (Note: OpenSwim only supports WAV files in Linear PCM format.)

Diagram Description: Illustrates connecting the OpenSwim to a laptop. The OpenSwim is shown connected via a USB cable to a charging cradle, which is then plugged into a laptop. A folder icon labeled 'File' and 'OpenSwim' indicates the device appears as a drive. Another diagram shows audio file icons (MP3, WMA, FLAC, WAV, AAC) being dragged into the 'OpenSwim' folder on a computer.

How to Wear

Pick up the headphones, bring them behind the back of your neck, position the earhooks on your ears, then enjoy your music!

*Wearing your headphones the wrong way could cause discomfort. The transducers should rest in front of your ears.

Diagram Description: A profile view of a person wearing the headphones. Two steps are indicated: '1' shows the headphones being brought behind the neck, and '2' shows them positioned over the ears.

Volume

Operate volume controls while audio is playing.

How to change volume: While your audio is playing, adjust headphone volume by pressing either the Volume + ➕ or Volume - ➖ buttons.

*A "beep" will sound when the volume is at its max.

*Listening with headphones at high volume may affect your hearing and the audio will be distorted.

Diagram Description: A close-up of the headphone controls, highlighting the 'Volume + Button' and 'Volume - Button'.

Music Function

• Play/pause music: Click Multifunction/Power Button ? once.
• Next song: Press and hold Volume + ➕ for 2 seconds while music is playing.
• Previous song: Press and hold Volume - ➖ for 2 seconds while music is playing.
• Change EQ Setting: Press and hold Mode Button Ⓜ️ for 2 seconds.
• Play mode: Click Mode Button Ⓜ️ once to cycle through "Normal/Repeat/Shuffle".

Diagram Description: Shows the headphone unit with the 'Mode Button', 'Multifunction/Power Button', 'Volume -', and 'Volume +' buttons clearly labeled.

Check Battery Status

Operate controls while audio is not playing.

How to check battery status: Click the Volume + ➕ or Volume - ➖ button while music is paused. Audrey will tell you the battery status: "Battery high/Battery medium/Battery low/Charge me".

Diagram Description: A close-up of the headphone controls, highlighting the 'Volume + Button' and 'Volume - Button'.

EQ Modes

General Mode: Balanced frequency for listening to music.

Swimming Mode: For use while swimming.

Diagram Description: Two icons are shown. The first is an ear with sound waves emanating from it, labeled 'General Mode'. The second is a figure swimming in waves, labeled 'Swimming Mode'.

Switching EQ Modes

Operate controls while music is playing.

How to switch EQ mode: Press and hold the Mode Button Ⓜ️ while music is playing until you hear a beep. Audrey will say: "General mode/Swimming mode".

Diagram Description: Shows the headphone unit with the 'Mode Button' highlighted on the side and on the underside near the controls.

Changing Languages

Your headphones have four built-in languages: Chinese, English, Japanese and Korean.

How to change the language: Press and hold both Volume + ➕ and Volume - ➖ buttons until you hear a beep. Audrey will say: "中文/English/한국어/日本語".

Diagram Description: Shows the headphone unit with the 'Volume -' and 'Volume +' buttons clearly labeled.

Change the Folder

It is recommended to use different folders to categorize music.

How to change the folder:

• Press and hold both Multifunction Button ? and Volume - ➖ until you hear a beep. Audrey will say: "Play Current Folder/Play All Folders".
• Press and hold Volume + ➕ and Multifunction Button ? for 2 seconds after you hear "Play Current Folder". You will then hear, "Next folder".

Diagram Description: Shows the headphone unit with the 'Multifunction/Power Button', 'Volume -', and 'Volume +' buttons clearly labeled.

Charging Tips

The headphones will automatically shut down when charging.

Instructions:

1. Attach OpenSwim to the USB Charging Cradle. Make sure that Pogo Pins and Terminals are in contact.
2. Connect the cradle to a computer or an adapter.

The LED indicator will turn blue when charging is complete.

Diagram Description: Illustrates the OpenSwim headphones connecting to the USB Charging Cradle. The 'Terminals' on the headphones align with the 'Pogo Pins' on the cradle.

Storage and Maintenance

• The MP3 player should be kept in a cool, dry place with ambient temperatures of 0-45°C. Using the headphones in extreme cold or heat may shorten the battery life.
• If stored without use for an extended period of time, charge before use.
• Clean the MP3 player with a dry, soft towel after use.
• Dry the MP3 player before charging.

Safety Warnings

• The MP3 player might explode if the battery is improperly replaced. It shall only be replaced with a battery of the same type or of the equivalent performance.
• Do not expose the MP3 player to sunlight, fire or similar high temperature.
• Do not disassemble the MP3 player or subject the MP3 player to shock, squeeze and fire. Do not use the MP3 player if it swells up. Do not expose the MP3 player to high temperature.
• If you use a power adapter, do purchase the supporting power adapter that is CCC certified and meets the standards and requirements.
• Do not use the MP3 player when you are diving deeper than 2 meters.
• The MP3 player might drop during intense exercises.
• The MP3 player can be placed in fresh water, tap water, swimming pool, sea water, etc., but not be placed in soapy water, bath liquid, laundry detergent, high temperature or humidity.
• The charging pole-piece in the MP3 player is with anti-corrosion treatment. However, as seawater is highly corrosive, you are recommended to clean the headset immediately when it is out of seawater.
• Listening with this headset at high volume may affect your hearing and may lead to voice distortion.

Note

• OpenSwim only supports WAV file in Linear PCM format.
• OpenSwim will power off after 1 hour of inactivity.
• "Charge me" prompt will occur at about 20 minutes of use time remaining.

Design and specification are subject to change without notice. For the most up-to-date product information, please visit www.shokz.com.cn.