SUNMI T6820 Smart POS System - Quick Start Guide

Product Overview

The SUNMI T6820 is a smart POS system designed for various business applications. This guide provides essential information for its setup and operation.

Device Components

Front View:

• NFC Reader: For sensing Quick Pass Cards.
• Magnetic Card Reader: For reading bank card magnetic stripe information.
• Scan Button (optional): Short press to scan barcodes.
• Type-C USB: Used for charging and developer debugging.
• Function Button: For customized functions.
• Power Button: Short press to wake/lock screen. Long press to power on/off/reboot.
• Printer: For printing sales slips.
• IC Card Reader: For reading chip cards.
• Scanner (optional): For accurate data capture.
• Rear Camera: Supports photographing and 1D/2D code scanning.
• Extend Pins: To connect to a dock (sold separately).

SIM/SD Card Slots:

• Nano SIM Card Slot: For inserting a Nano SIM card (supports China Mobile, China Unicom, China Telecom 2G/3G/4G).
• PSAM Card Slot: For inserting a PSAM card (SIM card optional).
• Micro SD Card Slot: For expanding storage.

Printing Instructions

The device supports 58mm thermal paper (57±0.5mm x Ø40mm).

1. Open the paper container using the uncovering handle. Do not force it to avoid print head gear wear.
2. Feed the paper correctly in the indicated direction and pull some paper outside the cutter.
3. Close the paper container cover to finish.

Note: If the printed paper is blank, check the paper roll direction.

Safety Warnings

General Safety:

• Connect the AC plug to the corresponding AC socket.
• Do not open the power adapter without authorization.
• This is a Class A product and may cause radio interference.
• Do not open the device in hazardous locations.

Battery Safety:

• Explosion danger if replaced with the wrong battery.
• Dispose of used batteries properly; do not throw them into fire.
• This device is an explosion-proof product with Ex ic IIC T6 Gc level.
• Do not charge the battery in hazardous locations.
• Do not ingest battery; chemical burn hazard. Keep batteries away from children.

Important Safety Instructions:

• Avoid installation or use during lightning storms.
• Disconnect power immediately if abnormal odor, heat, or smoke is detected.
• The paper cutter is sharp; do not touch.

Environmental Suggestions:

• Do not use near water or moisture.
• Do not use in extremely cold or hot environments.
• Do not drop, throw, or bend the device.
• Use in a clean, dust-free environment.
• Do not use near medical equipment without permission.

Statements and Disclaimer

The Company is not responsible for damages caused by non-compliance with this guide, or by optional items/consumables. Unauthorized modifications are not permitted.

The Company reserves the right to interpret this document and to alter specifications without prior notice. Product details may vary due to upgrades.

Regulatory Information

EU Regulatory Conformance:

• Conforms to CE standards.
• Full text of EU declaration of conformity available at: https://developer.sunmi.com/docs/read/en-US/maaeghjk480
• Restrictions: 5150-5350MHz band is for indoor use only.

FCC Compliance Statement:

• This device complies with Part 15 of the FCC Rules.
• Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

ISED Canada Compliance Statements:

• This device complies with ISED Canada licence-exempt RSS standard(s).

RF Exposure Statement (SAR):

• This device complies with EU, FCC and IC RSS-102 applicable limits for radio frequency (RF) exposure.
• Visit: www.sunmi.com

Technical Specifications

Operating Temperature: -10℃ ~ 50 ℃

Storage Temperature: -20 ℃ ~ 60 ℃

Charging Temperature: 0℃ ~ 40℃

Battery: Only T6820 battery is supported (Manufacturer: Shanghai Sunmi Technology Co., Ltd.).

External Power Supply: Chargers supplied by SHENZHEN TIANYIN ELECTRONICS CO., LTD. or Jiangsu Chenyang Electron Co., Ltd.

System Pre-installed Software

• Application Market
• Push Service
• User Feedback
• Data Service
• Launcher
• Hardware Manager
• Function Key Customization
• BaseService
• Customization Services (Wallpaper, Boot Animation)
• User Guide
• Startup Guide
• OTA

To view software details: Go to Settings -> Applications. To uninstall: Go to Settings -> Applications -> Manage Applications -> Uninstall.

Product Warranty and Certification

Product Warranty Card: Details warranty period and conditions for free repair.

Product Qualification Certificate: Indicates inspection passed.

Manufacturer: Shanghai Sunmi Technology Co., Ltd.

Address: Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China.

Manufacturing Process Description

Finished Product Size: 80mm × 220mm

Unfolded Size: 64mm × 220mm

Process: Black printing + 2 colors, core folding

Material: 108g coated paper