SUNMI N4Z6A NFC&MSR&Scanner Modular Accessory

Product Introduction

This document provides information on the SUNMI N4Z6A, a three-in-one modular accessory. It integrates NFC, Magnetic Stripe Reader (MSR), and Scanner functionalities.

Key Features:

• NFC reader
• Magnetic Stripe Reader (MSR)
• Scanner
• Camera (mentioned in diagram)

Visual Description: The accessory features a camera on one side, a card swipe port on the top, and an NFC module on the front, indicated by a contactless payment symbol.

Installation Instructions

The three-in-one accessory connects to the main screen via extension ports labeled 1, 2, 3, and 4.

Visual Description: A diagram illustrates a rectangular device with four connection ports numbered 1 through 4, indicating the connection points for the accessory.

Safety Information

Safety Warning

This product is only suitable for safe use at altitudes up to 5000 meters.

Important Safety Instructions

• Avoid installation or use during lightning storms to prevent the risk of electric shock.
• If you detect an unusual odor, overheating, or smoke, immediately disconnect the power supply.

Disclaimer

Due to product updates, certain details in this document may be inconsistent with the actual product. The real device shall prevail. SUNMI owns the interpretive right of this document and reserves the right to modify this user guide without prior notice.

Declaration

The company is not responsible for the following:

• Damage caused by use and maintenance not in accordance with the conditions described in this guide.
• Any damages or problems caused by alternatives or consumables not provided by SUNMI.
• Product modifications or changes made without the company's consent.
• System instability or safety risks arising from using third-party ROM systems or modifying system files.

Hazardous Substances Information

This product contains hazardous substances as indicated in the table below, in compliance with SJ/T11363-2014 standards.

Symbol Key:

• 'O': Indicates that the content of the hazardous substance in all homogeneous materials of this component is below the limit requirement specified in SJ/T11363-2014.
• 'X': Indicates that the content of the hazardous substance is above the limit requirement specified in SJ/T11363-2014 in at least one homogeneous material of this component. The 'X' in the table indicates that the content exceeds the limit due to the lack of mature alternative technology in the industry.

Products that reach or exceed their environmentally friendly use period should be recycled and reused according to the "Measures for the Administration of Control of Pollution from Electronic Information Products" and should not be arbitrarily discarded.

Warranty and Qualification

Product Warranty Card: Details such as product name, model, serial number, purchase date, and warranty period are provided. The company offers warranty services from the date of purchase.

Warranty Exclusions: Free warranty is not provided for products that have been:

• Unauthorizedly disassembled or repaired.
• Product barcodes, fragile labels are damaged or the warranty card is altered or incomplete.
• Operated improperly, leading to malfunctions.
• Damaged by water, drops, scratches, or other human-induced damage.
• Affected by force majeure events.
• Beyond the warranty period.

Product Qualification Certificate: The product has passed inspection.

Regulatory Compliance

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting the antenna, increasing separation, connecting to a different circuit, or consulting a dealer/technician. Caution: Unauthorized modifications may void the user's authority to operate the equipment.

ISED Canada Compliance Statements

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:(1) L'appareil ne doit pas produire de brouillage, et (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. CAN ICES-003 (B)/NMB-003(B).

EU Regulatory Conformance

Shanghai Sunmi Technology Co., Ltd. declares that this device complies with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available at:

• EU Declaration of Conformity
• UK PSTI SOC Website

Restrictions of Use

This product may be used in certain European member states with restrictions, particularly for products operating in the 5150 - 5350 MHz & 5945-6425 MHz frequency bands (WAS, RLANs), which shall be restricted to indoor use.

EU Representative: SUNMI France SAS, 186, avenue Thiers, 69006 Lyon, France.

WEEE Symbol: ♻️ This symbol (crossed-out wheelie bin) means the product must not be disposed of with normal household waste. At the end of its life cycle, waste equipment should be taken to designated collection points, returned to the distributor when purchasing a new product, or contact your local authority representative for detailed information on WEEE recycling.

RF Exposure Statement (SAR)

• This equipment complies with EU, FCC, and IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Information About the Software

The description of accessories and components, including software that allows the radio equipment to operate as intended, can be obtained in the full text of the EU declaration of conformity at the following internet address: https://developer.sunmi.com/docs/read/en-US/maaeghjk480.

Manufacturer Information

Manufacturer: Shanghai Sunmi Technology Co., Ltd.

Address: Room 505, No.388, Song Hu Road, Yang Pu District, Shanghai, China.

Website: www.sunmi.com

Service Hotline: 400-6666-509