Sunmi V2s Plus T5F01 Quick Start Guide

Thank you for choosing the Sunmi V2s Plus T5F01 smart terminal.

Device Overview

The Sunmi V2s Plus T5F01 is a versatile smart terminal designed for various commercial applications.

NFC Reader (optional): For reading NFC cards, like loyalty cards.
Printer: For printing receipts when the device is on.
Scan Button/LED (optional): Short press to enable barcode scanning function.
Type-C: For device charging and developer debugging.
Micro SD Card Slot/Nano SIM Card Slot: For installing the Micro SD card and Nano SIM card.
Front Camera (optional): For video conference, or photo/video taking.
Power Button: Short press to wake up the screen, lock the screen. Long press to turn on/off or reboot. Long press for 11 seconds to reboot a frozen device.
Volume Button: For volume adjustment.
Scanner (optional): For barcode data collection.
Rear Camera: For photo taking and quick 1D/2D barcode reading.
Pogo pin: For connecting a barcode scanning accessory or a cradle for communication and charging.
PSAM Card Slots (optional): For installing PSAM cards.

Printing Instructions

This device supports 80mm thermal receipt or label paper rolls. Black label support is also optional. The paper roll specification is 79±0.5mm × Ø50mm.

Press to open the printer cover. Do not force open to avoid printhead gear wear.
Load the paper into the printer and pull some paper outside the cutter following the shown direction.
Close the cover to complete paper loading.

Notice: If the printer prints blank paper, please check whether the paper roll has been loaded in the correct direction.

Tips: To clean a label printhead, it is recommended to use a cotton swab dipped in alcohol or an alcohol prep pad (75% isopropyl alcohol) to wipe the printhead.

Safety Warnings and Important Instructions

Safety Warning:

Connect the AC plug to the AC socket corresponding to the marked input of the power adapter.
To avoid injury, unauthorized persons shall not open the power adapter.
This is a Class A product. This product may cause radio interference in living environments. In that case, the user may be required to take adequate measures against interference.
Battery replacement: Explosion danger may arise if replacing with the wrong battery. The replaced battery shall be disposed of by maintenance personnel, and please do not throw it into fire.

Significant Safety Instructions:

Do not install or use the device during lightning storms to avoid the potential risks of lightning shock.
Please turn off the power immediately if you notice abnormal odor, heat, or smoke.
The paper cutter is sharp, please do not touch.

Suggestions:

Do not use the terminal near water or moisture to prevent liquid from falling into the terminal.
Do not use the terminal in extremely cold or hot environments, such as near flames or lit cigarettes.
Do not drop, throw, or bend the device.
Use the terminal in a clean and dust-free environment if possible to prevent small items from falling into the terminal.
Please do not use the terminal near medical equipment without permission.

Statements

The Company does not assume responsibilities for damages caused by use and maintenance without complying with the conditions specified in this guide. The Company will not assume any responsibilities for damages or problems caused by optional items or consumables (rather than the initial products or approved products of the Company). The customer is not entitled to change or modify the product without consent.

The product's operating system supports official system updates. However, if you change the operating system into a third-party ROM system or alter system files by system cracking, it may cause system instability and security risks and threats.

Disclaimer: As a result of product upgrading, some details in this document may not match the product, and the actual product shall govern. The Company reserves the right of interpretation of this document and the right to alter this specification without prior notice.

EU Regulatory Conformance

Shanghai Sunmi Technology Co., Ltd. declares that this device complies with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://developer.sunmi.com/docs/read/en-US/maaeghjk480

RESTRICTIONS OF USE: For products operating in the 5150-5350MHz and 5945-6425MHz frequency bands (if the product supports 6e), wireless access systems (WAS), including radio local area networks (RLANs), shall be restricted to indoor use.

EU Representative: SUNMI France SAS, 186, avenue Thiers, 69006 Lyon, France.

WEEE Recycling: This symbol means that the product should not be disposed of with normal household waste. At the end of its life cycle, waste equipment should be taken to designated collection points.

RF Exposure Statement (SAR): This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. Please refer to the instruction on SUNMI website for specific values.

Frequency and Power for EU:

Band	Frequency	Power (dBm)
GSM900	880-915	34.00
DCS1800	1710-1785	31.00
WCDMA Band I	1920-1980	24.00
WCDMA Band VIII	880-915	24.00
LTE Band 1	1920-1980	25.00
LTE Band 3	1710-1785	25.00
LTE Band 7	2500-2570	15.00
LTE Band 8	880-915	24.50
LTE Band 20	832-862	25.00
LTE Band 28	703-748	25.00
LTE Band 38	2570-2620	23.00
LTE Band 40	2300-2400	25.00
BT	2402-2480	9.39
BLE	2402-2480	5.34
WLAN	2412-2472	17.55
WLAN	5150-5350	15.98
WLAN	5470-5725	15.54
WLAN	5725-5850	13.02
GNSS	1559-1610
NFC	13.56	42.45dBuV/m@10m

ISED Canada Compliance Statements

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Devices operating in the 5150-5250 MHz band are reserved only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

FCC Compliance Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Manufacturer Information

Manufacturer: Shanghai Sunmi Technology Co., Ltd.

Address: Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China.

Product Information

Product Name: Sunmi V2s Plus

Product Model: T5F01

Product Number: M05052160

Product Warranty

Warranty Period: The company provides a warranty service for [Number] days from the date of purchase.

Exclusions from Free Warranty:

Products that have been disassembled or repaired without permission.
Damaged or altered product barcodes, fragile stickers, or warranty cards.
Malfunctions caused by failure to operate the equipment according to the instructions.
Man-made damage caused by water ingress, drops, scratches, or breakage.
Malfunctions or damage caused by force majeure.
Out of warranty period.

Contact Information:

Company Address: Shanghai, China
Contact Phone: [Phone Number]

Toxic and Hazardous Substances

Table for Name and Content Identification of Toxic and Hazardous Substances in this Product

Toxic and Hazardous Substance or Element	Lead (Pb)	Mercury (Hg)	Cadmium (Cd)	Hexavalent Chromium (Cr(VI))	Polybrominated Biphenyls (PBB)	Polybrominated Diphenyl Ethers (PBDE)
Circuit Board Components	O	O	O	O	O	O
Structural Parts	O	O	O	O	O	O
Packaging Parts	O	O	O	O	O	O

Note: 'O' indicates that the content of the toxic and hazardous substance in all homogeneous materials of the component is below the limit specified in SJ/T 11363-2006. 'X' indicates that the toxic and hazardous substance is present in at least one homogeneous material of the component exceeding the limit stipulated in SJ/T 11363-2006, due to the absence of mature replaceable technology in the industry.

Products that have reached or exceeded their environmental protection service life should be recycled and reused according to the Regulations on Control and Management of Electronic Information Products, and should not be discarded randomly.

System Pre-installed Software List

Application Market
Push Service
User Feedback
Data Service Launcher
Hardware Manager
Function Key Customization
BaseService (Customization Service: Wallpaper, Boot Animation)
Developer Guide (Debugging Assistant)
User Guide
Boot Guide
Remote Assistance
OTA

For detailed software information, select "Settings -> Applications", then select the respective software name to view information. To uninstall software, select "Settings -> Applications -> Manage Applications -> Uninstall", or long-press the icon and drag it to the trash can.

Usage Scenarios

2G/3G/4G: Primarily used in commercial scenarios as mobile data terminals. Target customers include restaurants, retail stores, scenic spots, and for scan-to-pay services. Functions include: receiving takeout orders, ordering food, queue management, membership verification, ticket validation, and voice calls.

Multilingual Greetings

The device displays greetings in multiple languages:

	SUNMI T6820 Smart POS System Quick Start Guide A comprehensive guide to the SUNMI T6820 Smart POS system, covering its features, operation, safety instructions, and specifications. This document is intended for users and developers.
	SUNMI T6F0A/T6F0B Smart POS System User Manual and Product Information Comprehensive guide to the SUNMI T6F0A/T6F0B smart POS system, covering device components, setup, safety warnings, regulatory compliance, and technical specifications. Learn about its scanner, card readers, NFC, and connectivity options.
	SUNMI M3L Wireless Data Terminal User Manual User manual for the SUNMI M3L Wireless Data Terminal, covering safety warnings, product specifications, regulatory compliance, and operational guidelines. This device is designed for retail and catering point-of-sale scenarios.
	SUNMI V2s Smart Mobile Terminal: Features and Specifications Explore the SUNMI V2s Smart Mobile Terminal, a versatile device designed for modern business needs. Learn about its enhanced performance, dual ticket and label printing capabilities, advanced 2D scanning, and strengthened protection. Detailed specifications cover OS, processor, display, communication, battery, memory, and more across various configurations like Standard, Label & NFC, Label & Scanner, GMS, and Industry Tailored.
	SUNMI P2 Quick Start Guide A concise guide to setting up and using the SUNMI P2 device, covering its features, functions, and safety information.
	SUNMI V1s Handheld POS Terminal Specifications Discover the SUNMI V1s, a versatile handheld POS terminal (Model W5920) featuring a 5.5-inch IPS display, 5MP camera, 5200mAh battery, built-in SEIKO printer, NFC, and multi-purpose scanning. Ideal for various business applications including order management, delivery, and payment processing.
	SUNMI V1s Handheld POS Terminal W5920 - Mobile Point of Sale Device Explore the SUNMI V1s Handheld POS Terminal (Model W5920), a versatile mobile point-of-sale solution featuring a 5.5-inch IPS display, integrated SEIKO printer, 5200mAh battery, and comprehensive support for printing, scanning, QR code payments, and order management. Designed for efficiency in retail, delivery, and service industries.
	SUNMI V1s Handheld POS Terminal (Model W5920) - Specifications & Features Discover the SUNMI V1s Handheld POS Terminal, model W5920, featuring a 5.5-inch IPS display, built-in SEIKO printer, 5MP camera, and 5200mAh battery. Ideal for printing, scanning, QR code payments, and order management.