HEMFJÄLLET

Step 1: Prepare the Cover

Unpack the fabric cover from its packaging. A hand is shown pulling the fabric out of a box [arrow-out].

A close-up shows a hand holding a fabric label [label].

A diagram shows a person ironing a fabric cover on an ironing board ([ironing board]) with an iron ([iron]). This step may be for pre-ironing the cover.

Step 2: Place Mattress Support

Place the mattress support or slatted frame onto the divan bed base. A large downward arrow (↓) indicates placement.

An information icon (ℹ️) is shown with the text "FÖLUNGEN" and a diagram of a mattress, suggesting this is the mattress support component.

Step 3: Fit Headboard Cover

Place the headboard cover section over the headboard. A hand is shown zipping up a seam ([zipper]) once (1x).

Step 4: Apply Main Bed Cover

Two people are shown fitting the main fabric cover over the bed frame. Arrows indicate downward (↓) and inward (→) placement to ensure a snug fit.

Step 5: Secure Cover to Headboard

Attach the fabric cover to the headboard. Arrows show the cover being inserted into slots or channels on the back of the headboard [arrow-right, arrow-left].

A close-up shows a hand pushing the fabric into these slots [hand push].

Step 6: Zip Headboard Cover

Zip up the seam of the headboard cover. A hand is shown pulling the zipper closed ([zipper]) once (1x).

Step 7: Secure Bottom of Cover

Secure the fabric cover at the bottom of the bed frame. Arrows indicate folding and attaching Velcro ([velcro attach]) to the frame.

A close-up shows a hand attaching Velcro strips.

Step 8: Zip Main Cover Seam

Zip up the main seam of the bed cover. A hand is shown pulling the zipper closed ([zipper]) with an arrow indicating the direction [arrow right].

Step 9: Tuck Cover Under Mattress Base

Tuck the fabric cover under the mattress base. Arrows show the fabric being tucked into the corners and edges [arrow down, arrow left, arrow right].

A close-up shows a hand tucking the fabric neatly [hand tuck].

Step 10: Secure Cover Further

Apply downward pressure (↓) to secure the cover. A hand is shown zipping up a seam ([zipper]) once (1x).

Step 11: Attach Bottom Straps

Attach securing straps or Velcro points at the bottom of the bed frame. Arrows indicate attachment [arrow left, arrow right].

A close-up shows a hand attaching a strap with Velcro ([velcro strap]).

Step 12: Place Mattress

Place the mattress onto the assembled bed base. A large downward arrow (↓) indicates placement.

An information icon (ℹ️) is shown with recommended mattress dimensions: "20 - 24 cm (7 7/8" - 9 1/2")".

Step 13: Fit Mattress Cover

Tuck the mattress cover around the mattress. Arrows show the cover being pulled and tucked into the corners [arrow up, arrow down, arrow left, arrow right].

A close-up shows a hand tucking the fabric at the corners [hand tuck]. This is done four times (4x).

Step 14: Assemble Drawer Unit

Assemble the drawer unit. Diagrams show folding sides and attaching them, with arrows indicating the direction of assembly [arrow left, arrow right, arrow down].

A close-up shows a hand attaching sides, highlighting seams and stitching [hand attach].

Step 15: Insert Drawer

Insert the assembled drawer into the bed frame. Arrows indicate the direction of insertion [arrow left, arrow right].

Care Step 1: Drawer Maintenance

Diagram shows folding and attaching parts of the drawer unit, possibly for cleaning or maintenance.

Care Step 2: Apply Mattress Cover

Diagram shows placing a cover over the mattress and tucking it in, similar to initial assembly.

Care Step 3: Secure Mattress Cover

Diagram shows securing the mattress cover at the bottom using Velcro ([velcro attach]).

Care Step 4: Remove Mattress Cover

Diagram shows removing the mattress cover by unzipping ([zipper]) once (1x) and pulling it off [arrow up, arrow left, arrow right].

Care Step 5: Apply Headboard Cover

Place the headboard cover. Arrows show upward placement and attachment [arrow up, arrow left, arrow right].

A close-up shows a hand unzipping ([zipper]) once (1x).

Care Step 6: Final Checks and Warnings

Final adjustments and warnings. An information icon (ℹ️) is shown with a warning symbol (⚠️) and a diagram illustrating correct zipper action [arrow right].

A crossed-out diagram (❌) shows an incorrect zipper action, indicating what not to do.