HEMFJÄLLET
A product from IKEA, designed and quality assured in Sweden.
Assembly Guidance
Two people are shown assembling the product.
A warning symbol [cross mark] indicates that certain actions should not be performed.
A person is shown with parts and a question mark [❓], indicating confusion or a need for clarification.
The same person is then shown on the phone with an IKEA logo, suggesting contacting customer support for assistance.
Step 1: Prepare the Cover
Open the packaging for the bed cover.
A hand is shown pulling the cover out of its packaging.
The cover is shown being ironed on an ironing board. This suggests the cover may be creased from packaging and needs to be smoothed out before use.
Step 2: Install Slat Base
Place the slat base or bed frame support into the main bed frame.
An information icon [ℹ️] points to a component labeled "FÖLUNGEN" (Swedish for components/parts), indicating this is a specific part to be placed.
A downward arrow [↓] indicates the direction of placement.
Step 3: Zip the Headboard Cover
A hand is shown zipping up a cover, indicated by "1x" for one zipper action.
The zipper action is shown on a close-up detail.
Step 4: Place the Headboard Cover
Two people are shown placing the headboard cover over the bed frame's headboard section.
Downward arrows [↓] indicate the cover is being lowered into place.
Step 5: Secure the Headboard Cover
A close-up shows a hand inserting the edge of the headboard cover into slots or channels on the frame.
The diagram indicates how the cover is meant to be fitted.
Step 6: Zip the Headboard Cover Fully
A hand is shown zipping up the side of the headboard cover, indicated by "1x" for one zipper action.
The zipper action is shown on a close-up detail.
Step 7: Attach Base Straps
A hand is shown attaching straps to the base of the bed frame, indicated by "1x" for one strap attachment.
The action involves securing straps, possibly with Velcro or a similar fastening.
Step 8: Zip the Side of the Headboard
A hand is shown zipping up the remaining side of the headboard cover, indicated by "1x" for one zipper action.
The zipper action is shown on a close-up detail.
Step 9: Place Mattress Topper/Protector
A mattress topper or protector is being placed onto the bed base.
Hands are shown guiding the cover, with arrows indicating the direction.
A close-up shows "2x" indicating two points of attachment or adjustment, likely related to securing the cover.
Step 10: Secure Mattress Topper/Protector
Downward arrows [↓] indicate pressure being applied to the mattress topper/protector.
A hand is shown zipping up a part of the topper/protector, indicated by "1x" for one zipper action.
The zipper action is shown on a close-up detail.
Step 11: Secure Bottom Edges
A hand is shown pulling and securing the bottom edges of the mattress topper/protector, indicated by "2x" for two points of attachment.
Arrows show the direction of pulling and securing.
Step 12: Secure Base Straps
Arrows indicate straps being pulled and secured at the bottom of the bed frame.
A hand is shown pressing down on a strap, indicated by "2x" for two strap actions.
Step 13: Place Mattress
A mattress is being placed onto the bed base.
A downward arrow [↓] indicates the direction of placement.
An information icon [ℹ️] provides dimensions for the mattress: "20 - 24 cm (7 7/8" - 9 1/2")".
Step 14: Fit Mattress Cover/Sheet
A mattress cover or sheet is being fitted over the mattress.
Arrows show the cover being pulled and adjusted.
A close-up shows hands securing the cover, indicated by "4x" for four points of attachment or adjustment.
Step 1 (Alternative/Repeat): Fit Mattress Cover
A cover is being pulled up and over the mattress.
Arrows indicate the direction of movement.
Step 2 (Alternative/Repeat): Secure Mattress Cover
A hand is shown zipping up the mattress cover, indicated by "1x" for one zipper action.
The zipper action is shown on a close-up detail.
Arrows indicate the cover being pulled down and secured.
Step 3 (Alternative/Repeat): Attach Headboard Cover
A hand is shown zipping up the headboard cover, indicated by "1x" for one zipper action.
The zipper action is shown on a close-up detail.
Arrows indicate the headboard cover being pulled upwards and attached to the frame.
