LILLFJÄLLET Divan Bed Cover Assembly Instructions

Product by IKEA

General Handling and Support

Initial handling of parts: Ensure correct orientation and avoid incorrect methods ❌.

If unsure about assembly, consult instructions or contact IKEA support ❓.

Step 1: Place Slatted Base

Place the slatted base (labeled "FÖLUNGEN") into the bed frame, aligning it correctly. The magnified view shows the underside of the slatted base with its support points ⬇️.

Step 2: Zip Cover

Zip up the cover. The inset shows a close-up of a hand operating a zipper ?️, pulling it to close a section of the cover ➡️.

Step 3: Drape Main Cover

Drape the main bed cover over the bed frame and headboard. Ensure it is centered and aligned ⬇️.

Step 4: Adjust Headboard Back

Adjust the cover at the back of the headboard. The inset shows a hand pulling a seam downwards ⬇️ to ensure a snug fit.

Step 5: Secure with Straps

Secure the cover using the straps at the bottom of the bed frame. The inset shows a hand attaching a strap, likely with Velcro, around the frame ↪️.

Step 6: Fine-tune Headboard Fit

Fine-tune the fit of the cover on the headboard. Arrows indicate horizontal adjustments ↔️ for optimal placement.

Step 7: Tuck Fabric Under Frame

Tuck the excess fabric of the cover under the bed frame and mattress. The inset shows a hand folding and tucking the fabric at the corners ➡️.

Step 8: Pull Cover Over Base

Pull the cover down over the base of the bed. The inset demonstrates tucking the fabric neatly at the corners ➡️.

Step 9: Final Adjustments

Make final adjustments to the cover, ensuring it is smooth and taut. The inset shows hands tucking the fabric at the corners for a clean finish ⬆️.

Step 10: Prepare Headboard Cushion Cover

Prepare the headboard cushion cover. The figures demonstrate folding the cover ➡️, and the inset shows it being zipped closed ?️.

Step 11: Attach Headboard Cushion Cover

Place the assembled headboard cushion cover onto the bed's headboard. Arrows indicate horizontal alignment ↔️.

Step 12: Place Mattress

Place the mattress onto the divan bed base ⬇️.

Step 13: Tuck Cover Under Mattress

Tuck the main bed cover under the mattress at all four corners. The '4x' indicates this action is repeated for each corner ➡️.

	LILLFJÄLLET Bed Frame Assembly Instructions Step-by-step guide for assembling the IKEA LILLFJÄLLET bed frame with storage, including detailed textual descriptions of each assembly stage and hardware information.
	TUFJORD Upholstered Bed Frame Assembly Instructions \| IKEA Detailed step-by-step assembly guide for the IKEA TUFJORD upholstered bed frame. Find all parts, hardware, and instructions to build your bed.
	BEGRIPA Handle Assembly Instructions Step-by-step guide for assembling the BEGRIPA handle from IKEA, including required tools and parts.
	IKEA MITTLED LED Spotlight - Assembly and Safety Instructions Comprehensive assembly guide and safety instructions for the IKEA MITTLED LED spotlight. Learn how to install, use, and maintain your MITTLED light safely. This document covers important safety warnings, step-by-step installation, and product usage guidelines.
	MITTLED LED Kitchen Drawer Lighting Installation Guide Comprehensive installation guide for the IKEA MITTLED LED kitchen drawer lighting system, including safety warnings and step-by-step assembly instructions.
	TJÅLLE Upholstered Ottoman Bed Assembly Instructions \| IKEA Step-by-step guide for assembling the IKEA TJÅLLE upholstered ottoman bed. Includes a detailed parts list, visual descriptions, and assembly instructions for safe and correct installation.
	GAMMALBYN 3-Seat Sofa Assembly Instructions Step-by-step assembly guide for the IKEA GAMMALBYN 3-seat sofa, detailing parts, tools, and assembly procedures for a successful setup.
	IKEA Canton September Offers: Local IKEA Family Member Deals Explore exclusive September deals for IKEA Family members at IKEA Canton. Find discounted prices on furniture, home decor, lighting, and kitchenware. Offers valid Sept 1-30, 2025, in-store only.