Assembly Instructions
WF 310874/WF 310875
Contact Information
For any questions, please feel free to contact us.
Email: hdteam@aminalife.com
Important Notes
- Place all parts on a clean and smooth surface such as a rug or carpet to avoid parts from being scratched.
- Before you begin, kindly follow the assembly instructions step by step.
- Do not tighten all screws and bolts until the bed is fully set-up.
Made in Vietnam.
Parts Identification
WF 310874 (BOX 1)
- Part 1: Left Arm (1 pc)
- Part 2: Right Arm (1 pc)
- Part 3: Slat Roll (1365x60x15mm) (10 pcs)
- Part 4: Legs (4 pcs)
- Part 5: Support leg (3 pcs)
WF 310875 (BOX 2)
- Part 6: Back Panel (1 pc)
- Part 7: Left Upper Rail (1 pc)
- Part 8: Right Upper Rail (1 pc)
- Part 9: Center Rail (1 pc)
- Part 10: Trundle Front Panel (1 pc)
- Part 11: Trundle Back Panel (1 pc)
- Part 12: Slat Roll (985x60x15mm) (10 pcs)
- Part 13: Wheels (59x42x66mm) (4 pcs)
Hardware List
Hardware in WF 310875
| Identifier | Description | Quantity |
|---|---|---|
| A | Short Bolt (5/16 "X25mm) | 16 pcs |
| B | Allen Wrench (m4x75mm x32mm) | 1 pc |
| C | Flat Washer | 16 pcs |
| D | Spring Washer | 16 pcs |
| E | Flat Head Screw (m4x30mm) | 44 pcs |
| F | Bracket (100mmx40mmx2mm) | 4 pcs |
| G | Flat Head Screw (m4x15mm) | 40 pcs |
| H | L Bracket (38mmx38mmx25mmx2mm) | 4 pcs |
Assembly Steps
Step 1: Attach Legs to Side Panels
Attach the Legs (Part 4) to the bottom of the Left Arm (Part 1) and Right Arm (Part 2). Use 8 Short Bolts (A) and 8 Flat Washers (C).
Step 2: Connect Side Panels and Center Rail to Back Panel
Connect the Left Arm (Part 1), Right Arm (Part 2), and Center Rail (Part 9) to the Back Panel (Part 6). Secure using 8 Short Bolts (A), 8 Spring Washers (D), and 8 Flat Washers (C).
Step 3: Attach Upper Rails
Attach the Left Upper Rail (Part 7) and Right Upper Rail (Part 8) to the assembled frame. Use 4 Brackets (F), 8 Short Bolts (A), 8 Spring Washers (D), and 8 Flat Washers (C).
Step 4: Attach Slat Rolls
Attach the Slat Rolls (Part 3) to the frame. Use 20 Flat Head Screws (E).
Step 5: Attach Support Legs
Attach the Support Legs (Part 5) to the underside of the Center Rail (Part 9) and other support beams. Use 4 Flat Head Screws (E).
Step 6: Finalize Slat Placement
Ensure the Slat Rolls (Part 3) are correctly positioned. The diagram indicates using 4 Flat Head Screws (E) for this step, possibly to secure the ends of the slats.
Step 7: Attach Trundle Panels
Attach the Trundle Front Panel (Part 10) and Trundle Back Panel (Part 11) to the trundle frame. Use 4 L Brackets (H) with screws. The diagrams indicate using 24 Flat Head Screws (G) and 20 Flat Head Screws (E) for this assembly.
Step 8: Attach Trundle Wheels
Attach the Wheels (Part 13) to the bottom of the Trundle Front Panel (Part 10) and Trundle Back Panel (Part 11). Use 16 Flat Head Screws (G).
Step 9: Assembly Complete
The bed assembly is now complete.
