Important Note ⚠️
Note: PLACE ALL PARTS ON A CLEAN AND SMOOTH SURFACE SUCH AS A RUG OR CARPET TO AVOID THE PARTS FROM BEING SCRATCHED.
Note: BEFORE YOU BEGIN, KINDLY FOLLOW THE ASSEMBLY INSTRUCTIONS STEP BY STEP.
Note: DO NOT TIGHTEN ALL SCREWS AND BOLTS UNTIL THE BED IS FULLY SET-UP.
Made in Vietnam
Assembly Overview
Diagram showing a complete bed frame assembly. The frame includes a headboard with tufted buttons, two side rails, a footboard, and a slatted bed base. The parts are labeled with numbers 1 through 9 in a general overview diagram.
Parts Identification
WF 310870 (BOX 1)
| Part No. | Description | Quantity |
|---|---|---|
| 1 | Left Arm | 1pc |
| 2 | Right Arm | 1pc |
| 3 | Slat Roll (1365x60x15mm) | 10pcs |
| 4 | Legs | 4pcs |
| 5 | Support leg | 3pcs |
WF 310871 (BOX 2)
| Part No. | Description | Quantity |
|---|---|---|
| 6 | Back Panel | 1pc |
| 7 | Left Upper Rail | 1pc |
| 8 | Right Upper Rail | 1pc |
| 9 | Center Rail | 1pc |
Hardware List
| Label | Description | Quantity |
|---|---|---|
| A | Short Bolt (5/16 "X25mm) | 16 pcs |
| B | Allen Wrench (m4x75mm x32mm) | 1 pc |
| C | Flat Washer (M5x75mm x32mm) | 16 pcs |
| D | Spring Washer | 8 pcs |
| E | Flat Head Screw (m4x30mm) | 24 pcs |
| F | Bracket (100mmx40mmx2mm) | 4 pcs |
Step 1
Attach the legs (part 4) to the headboard (part 1) and the footboard (part 2). The diagram shows the headboard and footboard with legs already attached, indicating the connection points.
Diagram shows headboard (1) and footboard (2) with legs (4) attached.
Step 2
Attach the side rails (parts 7 and 8) to the headboard (part 1) and footboard (part 2). Insert the slat rolls (part 3) and support legs (part 5) into their designated positions. Use Short Bolts (A) and Spring Washers (D) for these connections.
Diagram shows side rails (7, 8) being attached to headboard (1) and footboard (2). Slats (3) and support legs (5) are shown being placed. Hardware A (bolts) and D (spring washers) are indicated for connection.
Hardware used: 8x Bolt (A), 8x Spring Washer (D), 1x Allen Wrench (B), 8x Flat Washer (C).
Step 3
Attach the back panel (part 6) to the side rails (parts 7 and 8) using the Brackets (F) and Short Bolts (A). The diagram shows two brackets on each side, secured by bolts.
Diagram shows the back panel (6) being attached to the side rails (7, 8) using brackets (F) and bolts (A).
Hardware used: 4x Bracket (F), 8x Bolt (A), 8x Spring Washer (D), 1x Allen Wrench (B), 8x Flat Washer (C).
Step 4
Secure the slat rolls (part 3) to the side rails (parts 7 and 8) and the center rail (part 9) using Flat Head Screws (E). The diagram shows screws being inserted through the slats into the rails.
Diagram shows slat rolls (3) being attached to side rails (7, 8) and center rail (9) using flat head screws (E).
Hardware used: 20x Flat Head Screw (E).
Step 5
Attach the support legs (part 5) to the center rail (part 9) using Flat Head Screws (E). The diagram shows three support legs being screwed into the underside of the center rail.
Diagram shows support legs (5) being attached to the center rail (9) using flat head screws (E).
Hardware used: 4x Flat Head Screw (E).
Step 6
Final assembly check. Ensure all parts are correctly positioned and all screws and bolts are tightened securely.
Diagram shows the bed frame in its assembled state.
Step 7
COMPLETE
Diagram shows the fully assembled bed frame.
Related Documents
 |
Assembly Instructions for WF 310874/WF 310875 Daybed Step-by-step assembly guide for the WF 310874/WF 310875 daybed, including parts identification, hardware list, and assembly procedures. |
 |
Twin Daybed with 2 Drawers Assembly Instructions - Model SD33706 Comprehensive assembly guide for the Aminalife Twin Daybed with 2 Drawers (Model SD33706). Includes detailed part lists, hardware specifications, and step-by-step instructions with textual descriptions of diagrams for easy setup. |
 |
Assembly Instructions for Full Bed (N709P323198/N709P323199) | Aminalife Detailed assembly instructions, part list, and hardware guide for the Aminalife Full Bed, model numbers N709P323198 and N709P323199. Follow step-by-step instructions for easy setup. |
 |
Aminalife Wall Bed Assembly Instructions (N708P299599-N708P299600) Detailed assembly instructions for the Aminalife wall bed, covering part lists, hardware specifications, step-by-step building guidance, and essential wall mounting procedures. Includes models N708P299599 and N708P299600. |
 |
Assembly Instructions: Full Bed with Twin Trundle and 2 Drawers (YX5504) Comprehensive assembly guide for the YX5504 Full Bed with Twin Trundle and 2 Drawers. Includes detailed part and hardware lists, and step-by-step instructions for furniture assembly. |
 |
Assembly Instructions for N709P316299/N709P316300 Bed Frame Comprehensive assembly guide for the N709P316299 and N709P316300 bed frame models. Includes detailed part lists, hardware specifications, and step-by-step instructions for furniture assembly. |
 |
Assembly Instructions for Trundle Bed - Model N737P211270/71 Detailed assembly instructions for the Trundle Bed, Model N737P211270/71. Includes part lists, hardware lists, and step-by-step visual guides for assembly. |
 |
Assembly Instructions for Full Bed with Twin Trundle and 2 Drawers Detailed assembly instructions for the YX5504 Full Bed with Twin Trundle and 2 Drawers, including parts list, hardware list, and step-by-step guidance. |