Assembly Instructions

Safety Warnings

Important Safety Information:

• This bed is designed for use with mattresses meeting specific dimensions for the upper and lower bunks.
• Upper Bunk Mattress: Full Standard, Length 74"-75", Width 53 1/2", Thickness 6" max.
• Lower Bunk Mattress: Twin Standard, Length 74"-75", Width 38 1/2", Thickness 8" max.
• Replacement parts, including additional guardrails, can be obtained from GIGACLOUD TECHNOLOGY (USA) INC. dealers.
• Follow all warning information on the bunk bed end structure and carton. Do not remove warning labels.
• Always use recommended size mattresses or supports to prevent entrapment or falls.
• Mattress surface must be at least 5" (127mm) below the upper edge of guardrails.
• Do not allow children under 6 years of age to use the upper bunk.
• Periodically check guardrails, ladder, and other components for proper position, damage, and tightness of connectors.
• No horseplay on or under the bed; do not allow jumping on the bed.
• Always use the ladder for entering and leaving the upper bunk.
• Contact the manufacturer or dealer for replacement parts; do not use substitute parts.
• A night light may provide additional safety for children using the upper bunk.
• Always use guardrails on both long sides of the upper bunk. If the bunk bed is placed against a wall, the full-length guardrail should be against the wall to prevent entrapment.
• Water or sleep flotation mattresses are prohibited.
• STRANGULATION HAZARD: Never attach or hang items to parts not designed for use with the bed, such as hooks, belts, or jump ropes.
• Keep these instructions for future reference.
• Prohibit more than one person on the upper bunk.
• Assemble the bunk bed on its shipping carton to protect your floor or carpet.
• Ensure all staples are removed from the box before assembly.

Assembly Options

The following diagrams illustrate two possible assembly configurations for the bunk bed.

OPTION 1:

[Diagram showing Option 1 configuration of the bunk bed]

OPTION 2:

[Diagram showing Option 2 configuration of the bunk bed]

Part List

Box 1 Parts:

Box 2 Parts:

Box 3 Parts & Hardware:

Hardware List:

Assembly Steps

Follow these step-by-step instructions to assemble your bunk bed.

STEP 1:

[Diagram showing Step 1 assembly with parts A3, A5, B2, hardware 11 (4pcs), 9 (4pcs)]

STEP 2:

[Diagram showing Step 2 assembly with parts A4, A6, B2, hardware 11 (4pcs), 9 (4pcs)]

STEP 3:

[Diagram showing Step 3 assembly with parts A1, A2, B3, hardware 11 (4pcs), 10 (4pcs), 9 (8pcs)]

STEP 4:

[Diagram showing Step 4 assembly with parts B4, B5, B6, B7, hardware 11 (16pcs), 9 (16pcs), 10 (8pcs)]

STEP 5:

[Diagram showing Step 5 assembly with parts A7, A8, B8, B9, hardware 12 (2pcs), 6 (2pcs), 11 (7pcs), 9 (7pcs)]

STEP 6:

[Diagram showing Step 6 assembly with part C8, hardware 6 (4pcs)]

STEP 7:

[Diagram showing Step 7 assembly with parts C1, C2, C3, C4, C5, C6, hardware 1 (24pcs)]

STEP 8:

[Diagram showing Step 8 assembly with hardware 11 (16pcs), 9 (16pcs), 10 (12pcs)]

STEP 9:

[Diagram showing Step 9 assembly with hardware 1 (2pcs)]

STEP 10:

[Diagram showing Step 10 assembly with parts A9, B1, C7, hardware 1 (2pcs), 11 (4pcs), 8 (4pcs), 5 (2pcs), 12 (2pcs)]

STEP 11:

[Diagram showing Step 11 assembly with part C9, hardware 5 (6pcs)]

STEP 12:

[Diagram showing Step 12 assembly with hardware 15 (2pcs), 16 (8pcs)]

STEP 13:

[Diagram showing Step 13 assembly with parts E4, E5, E6, E7, E8, E9, F1, F2, F3, F4, F5, F6, F7, F8, F9, hardware 11 (8pcs), 9 (8pcs)]

STEP 14:

[Diagram showing Step 14 assembly with parts E4, E5, E7, F1, F2, F3, F4, F5, F6, F7, F8, F9, hardware 11 (6pcs), 9 (6pcs)]

STEP 15:

[Diagram showing Step 15 assembly with parts G1, G2, G3, G4, G9, hardware 14 (16pcs), 3 (20pcs), 7 (4pcs)]

STEP 16:

[Diagram showing Step 16 assembly with parts G5, G6, G7, G8, hardware 13 (12pcs), 5 (16pcs)]

STEP 17:

[Diagram showing Step 17 assembly with parts H1, H2, H3, hardware 1 (7pcs)]

STEP 18:

[Diagram showing Step 18 assembly with parts G4, H4, H5, H6, H7, hardware 18 (36pcs)]

STEP 19:

[Diagram showing Step 19 assembly with hardware 4 (2pcs), 2 (1pc)]

STEP 20:

[Diagram showing Step 20 assembly with parts D1, D2, D3, D4, hardware 14 (4pcs), 5 (4pcs)]

STEP 21:

[Diagram showing Step 21 assembly with parts D4, hardware 18 (3pcs)]

STEP 22:

[Diagram showing Step 22 assembly with hardware 5 (4pcs)]

STEP 23:

[Diagram showing Step 23 assembly with part E1, hardware 27 (4pcs), 17 (8pcs)]

STEP 24:

[Diagram showing Step 24 assembly with parts E2, E3, hardware 17 (56pcs)]

STEP 25:

[Diagram showing Step 25 assembly with parts D5, D6, D7, hardware 17 (2pcs)]

STEP 26:

[Diagram showing Step 26 assembly with parts D8, D9, hardware 17 (2pcs)]

STEP 27:

[Diagram showing Step 27 assembly with hardware 23 (1pc), 22 (1pc)]

STEP 28:

[Diagram showing Step 28 assembly with parts H8, H9, hardware 17 (8pcs)]

STEP 29:

[Diagram showing Step 29 assembly with parts I3, I2, hardware 13 (4pcs)]

STEP 30:

[Diagram showing Step 30 assembly with part I1, hardware 17 (12pcs), 19 (8pcs), 20 (4pcs)]

STEP 31:

[Diagram showing Step 31 assembly with hardware 16 (8pcs), 27 (32pcs), 25 (4pcs), 21 (4pcs)]

STEP 32:

[Diagram showing Step 32 assembly with parts J2, J5, J9, hardware 14 (16pcs), 15 (4pcs), 18 (4pcs), 17 (4pcs)]

STEP 33:

[Diagram showing Step 33 assembly with parts J1, J4, J7, J8, hardware 13 (3pcs), 17 (4pcs)]

STEP 34:

[Diagram showing Step 34 assembly with parts J3, J6, hardware 17 (19pcs), 19 (6pcs), 20 (3pcs), 15 (1pc), 25 (1pc), 16 (1pc)]

STEP 35:

[Diagram showing Step 35 assembly with hardware 24 (5pcs), 26 (10pcs)]

STEP 36:

[Diagram showing final assembly for Option 1 and Option 2]