Momcozy Portable Breast Pump

Preventing Milk Loss and Pumping Tips

Follow these tips to maximize your milk output and prevent milk loss:

1. Ensure the breast pump is assembled correctly.
2. Lean forward slightly to center your nipple within the breast shield tunnel. The breast pump should fit snugly against your breast.
3. Wearing a full-coverage nursing bra is recommended to create a good seal between your breasts and the breast shield.
4. Lean slightly forward when removing the breast pump from your breast after pumping.

Tips:

• The expected lifespan of washable parts is 1-3 months. Replace washable parts after long-term storage or before using for a new child.
• The breast pump automatically shuts off after 30 minutes of pumping.
• If irritation or discomfort occurs, gently break the seal between the breast shield and breast tissue with your finger. Stop use and consult a healthcare provider.

For any questions, please contact us by email: support@momcozy.com

Installation Instructions

Ensure your hands are clean before installation.

1. Attach the milk collector and secure the lid to ensure a proper seal.
2. Gently insert the valve into the milk collector. Check for any gaps.

For detailed video instructions, please refer to the user manual.

Cleaning and Sterilization

Non-washable parts:

• Tubes
• Motor unit

Washable parts:

• Valve
• Breast shield
• Milk collector

Cleaning and sterilizing washable parts:

1. Clean with soapy water (40-60 °C) for 3-5 minutes.
2. Sterilize using boiling water or steam in a sterilization pot. Maintain 100°C (212°F) for 5-10 minutes.

Warning: Do not sterilize pump parts in a microwave or UV sterilizer. High temperatures (over 110°C) can shorten their lifespan and pose safety risks.

Pouring Milk

1. Align the milk collector with the top of the breast shield and press firmly to create a secure connection.
2. Hold the milk collector in the correct direction when pouring milk. Pour milk from the breast shield tunnel.

For any questions, please contact us by email: support@momcozy.com

Control Panel

Control Panel Overview:

• 1. Suction Level Indicator
• 2. Mode Indicator
• 3. Usage Time/Suction Level Display
• 4. Battery Display
• 5. Power On/Off: Long press to turn on/off; Short press to pause/resume pumping session.
• 6. Increase (Suction/Setting)
• 7. Decrease (Suction/Setting)
• 8. Select Mode

Modes: Stimulation, Expression, Mixed.