ACTIVESHOP^® OCHO PRO 8 UV LED Lamp 84W

The "OCHO PRO 8 UV/LED LAMP" is a new generation professional lamp that quickly and evenly cures all gels, hybrid varnishes, and other light-curing preparations. Its dual LED light technology emits white light that does not strain the eyes. The PRO 8 lamp features a high-power, energy-saving light source with a dual wavelength range of 365 nm and 405 nm. It is equipped with 42 LEDs, providing a total maximum power of 84W. The lamp has a built-in motion sensor, a 30, 60, and 120-second timer, and when activated by the sensor, the lamp shines continuously for up to 120 seconds. The 120-second "Low Heat Mode" is a feature where the lamp's power gradually increases every 30 seconds, eliminating the burning sensation when curing builder gels. The large electronic display allows for easy time control. The removable base makes performing pedicure procedures easier and more convenient.

Technical Specifications

Product Features

1. Dual UV/LED light. Cures 2x faster than standard nail lamps.
2. Three time setting modes: 30, 60, 120 seconds. Time can be adjusted based on product type and manufacturer's recommendations.
3. Low Heat Mode (120s): A mode where the lamp gradually heats up to eliminate potential discomfort and burning sensation when curing nail polish or gel.
4. LCD screen for easy reading of remaining working time.
5. Easily removable base, making pedicure procedures easier and more convenient.
6. Automatic infrared sensor. The lamp automatically turns on and off when a hand is inserted.
7. Long-lasting LEDs. 42 durable LEDs with a lifespan of 50,000 hours.
8. Protects eyes and skin. Instead of the usual violet light, the lamp uses a gentle white light that is painless and harmless to nails, eyes, and skin.

Notes

1. Read the user manual carefully before first use.
2. Do not look directly into the LED light, as it may damage vision.
3. Do not use the lamp if the power supply is damaged.
4. Prolonged exposure may damage the skin.
5. Use products designed for curing with LED light.
6. After use, remember to unplug the device from the electrical outlet.
7. Keep the device away from children.
8. Keep the device away from water or other liquids.
9. Keep the device away from flammable and combustible materials.
10. The lamp is designed only for curing all types of hybrid varnish and gel formulations, not regular nail polish. Ensure your polish is compatible before use.
11. Do not immerse the device. Do not disinfect with excessive liquid. Water or disinfectant entering the device can damage it. It is recommended to maintain the UV/LED lamp with special products.

How to Use

1. Connect the power supply to the lamp. Do not do this with wet hands.
2. Turn on the device using the power button to start operation.
3. The device has 3 timer buttons: 30S, 60S, 120s. The 120s mode is the "Low Heat Mode". Power increases gradually to minimize any potential discomfort during varnish or gel curing.
4. When a hand is inserted into the lamp, the sensor activates the device.
5. The maximum operating time, without selecting a specific mode, is 120 seconds.

Safety Precautions

1. The device is professional equipment intended for use in beauty salons. Using the device only by qualified cosmetic personnel avoids undesirable effects during procedures.
2. The device must not be disassembled or attempted to be used for purposes other than those specified in this user manual. All servicing and repair work must be performed only by an authorized service technician (ACTIVESHOP Sp. z o.o. company).
3. Do not install or use the device near liquids, in damp places, or with wet hands to prevent liquids from entering the device.
4. In the following cases, immediately unplug the device from the electrical outlet and contact an authorized ACTIVESHOP Sp. z o.o. service:
   • a) Liquid has entered the device.
   • b) The device emits a strange smell, smoke, or unusual noise.
   • c) The power cable is damaged.
   • d) The device has been tipped over or its casing is damaged.
5. Do not place any objects on the cables. Do not place the device where someone might step on the power cord.
6. For safety reasons, unplug the power cord from the electrical outlet each time you finish working with the device.
7. Do not insert anything into the device's openings. If a foreign object enters an opening, unplug the cord and contact the distributor or manufacturer.
8. Do not place the device on an unstable trolley, shelf, or vehicle. A dropped device may be damaged.
9. To ensure the fixed service life of the device, it is recommended to maintain a one-minute interval before pressing the power button again (between switching on and off, and vice versa).
10. The power supply must match the specifications indicated on the nameplate. Otherwise, there is a risk that the device may malfunction, be damaged, or even burn out.

ATTENTION

1. In case of a damaged power cord or other malfunctions, contact an authorized service center to avoid danger.
2. This device can be used by children aged 8 and above, and by persons with reduced physical or mental capabilities, lacking experience and knowledge of the equipment, provided they are supervised or instructed on how to use the equipment safely, understanding the associated risks.
3. The equipment is not a toy. Do not allow children to play with the device.
4. Do not leave the device unattended when children or persons unfamiliar with its operation are nearby.

Disposal

Dispose of used electrical appliances, accessories, and packaging at recycling centers according to environmental protection regulations. Electrical appliances must not be disposed of with household waste. Follow the disposal rules for this type of equipment. To protect the environment, in accordance with Directive 2012/19/EU on waste electrical and electronic equipment, used electrical equipment must be collected separately and then taken to collection points for electronic and electrical waste. Disused and old appliances contain fully recyclable components and should therefore be sent for recycling. They should be handed over to appropriate collection points, as well as to the company "ACTIVESHOP Ltd".

🗑️ [Waste Bin Symbol]: The crossed-out wheelie bin symbol indicates that this product should not be disposed of with household waste.

Storage and Transportation

The device must be transported at temperatures from (-) 20 °C to (+) 50 °C, only in its original packaging. Keep the device in a well-ventilated room with relative humidity not exceeding 75%. Operating temperature: from (+) 10 °C to (+) 40 °C. During storage and transportation, the device must not be thrown or dropped, and must not be exposed to mechanical shocks or atmospheric influences.