ACTIVESHOP OCHO PRO 8 UV Lamp
Importer: ACTIVESHOP SP. Z O.O.
ul. Graniczna 8b, building DC2A 54-610 Wroclaw, Poland
www.activeshop.com.pl
Product Overview
The OCHO PRO 8 UV LAMP is a professional, latest-generation lamp designed for quick and even curing of all gels, hybrid varnishes, and other light-curable preparations using dual LED technology. It emits white light that is gentle on the eyes. The PRO 8 lamp features a high-powered, energy-saving light source with a dual wavelength range of 365 nm and 405 nm. It is equipped with 40 LEDs, providing a total maximum power of 84 W. The lamp includes a built-in motion sensor, timers for 30s, 60s, and 120 seconds. When the sensor is activated, it lights continuously for up to 120 seconds. The 120-second "Low Heat Mode" gradually increases power every 30 seconds, minimizing the burning sensation when applying builder gels. A large electronic display facilitates easy time control.
How to Use
- Connect the power supply to the lamp. Ensure hands are dry.
- Turn on the device using the ON/OFF button.
- Select the desired time using the 30s, 60s, or 120s buttons. The 120s mode is "Low Heat Mode," which gradually increases power to minimize discomfort during curing.
- Insert your hand into the lamp; a sensor will activate the device.
- The maximum operating time without selecting a specific mode is 120 seconds.
Note: The curing time for hybrid varnish or gel should always be adjusted according to the specific brand manufacturer's recommendations.
Recommendations
- Read the instruction manual carefully before first use.
- Avoid looking directly at the LED light to prevent eye damage.
- Do not use the lamp if the power supply is damaged.
- Prolonged exposure may cause skin damage.
- Use only products designed for LED light curing.
- Unplug the device after use.
- Keep the device away from children.
- Keep the device away from water and other liquids.
- Keep the device away from flammable and combustible materials.
- The lamp is designed for curing hybrid polishes and gel masses, not regular nail polishes. Ensure compatibility before use.
- Do not soak the device or disinfect with excessive liquids. Liquids entering the device can cause damage. It is recommended to use special cleaning agents for UV/LED lamps.
Technical Data
Rated voltage | 110 / 240 V |
Rated frequency | 50 Hz |
Power | 84 W |
Number of diodes | 42 |
Wavelength of light | 365 nm, 405 nm |
Dimensions | 23 x 20.5 x 12 cm |
Product Features
- UV/LED Dual Light: Offers 2x faster curing than traditional nail lamps.
- Three time setting modes: 30, 60, 120 seconds, adjustable based on product and manufacturer recommendations.
- Low Heat Mode (120s): Gradually increases lamp power to mitigate discomfort during curing.
- LCD display: For easy reading of remaining working time.
- Removable base: Facilitates easier and more comfortable pedicure procedures (slide base backward to remove).
- Automatic infrared sensor: Lamp turns on/off automatically when a hand is inserted.
- Long-lasting LEDs: 42 LEDs with a lifetime of 50,000 hours.
- Eye and skin protection: Uses soft white light, which is painless and harmless to nails, eyes, and skin, unlike typical violet light.
Safety Measures
- This is professional equipment for beauty salons, intended for use by qualified cosmetic personnel to avoid undesirable treatment outcomes.
- Do not disassemble or attempt to use the device for purposes other than those specified. Servicing and repairs must be performed by an authorized service technician (ACTIV Tomasz Pacholczyk company).
- Do not install or operate the device near liquids, in wet areas, or with wet hands to prevent liquid ingress.
- Immediately unplug the device and contact an authorized service provider (ACTIV Tomasz Pacholczyk) if: a) liquid has entered the device, b) the device emits unusual smells, smoke, or sounds, c) the power cord is damaged, or d) the device has been dropped or its housing is damaged.
- Do not place objects on cables or install the device where the power cord may be stepped on.
- For safety, unplug the power cord from the outlet after finishing work with the device.
- Do not insert objects into the device openings. If a foreign object enters, unplug the cord and contact the distributor or manufacturer.
- Do not place the device on unstable surfaces or vehicles, as dropping it may cause damage.
- To ensure the device's useful life, maintain a one-minute interval between switching the power button on and off.
- The power supply must match the specifications on the nameplate to prevent incorrect operation, damage, or fire hazards.
Caution
- In case of damage to the power cord or other malfunctions, contact an authorized service center to avoid danger.
- This equipment may be used by children aged 8 and above, and by persons with reduced physical or mental capabilities, or lack of experience, provided they are supervised or instructed on safe usage and understand the associated risks.
- The equipment is not a toy and should not be used for play by children.
- Do not leave the appliance unattended when children or untrained individuals are nearby.
- This electrical appliance is not a toy. Improper use can pose health risks or be fatal; use and store out of reach of children.
Disposal of the Device
Dispose of used electrical appliances, fixtures, and packaging at appropriate raw material reprocessing centers in accordance with environmental protection principles. Do not dispose of electrical appliances in household waste. Follow the rules for discarding this type of equipment. In compliance with Directive 2012/19/EC on waste electrical and electronic equipment, waste electrical equipment should be collected separately and handed over to designated collection centers. Old appliances contain valuable recyclable components and should be handed over for reprocessing. They can be delivered to appropriate collection points or to ACTIVESHOP Tomasz Pacholczyk Company.
[Symbol of crossed-out wheeled bin]
Storage and Transport
The device should be transported within a temperature range of -20°C to +50°C, exclusively in its original packaging. Store the device in a well-ventilated area with a relative humidity not exceeding 75%. The operating temperature range is +10°C to +40°C. During storage and transport, the device must not be thrown, dropped, exposed to mechanical shocks, or atmospheric agents.