ACTIVESHOP®

Device Functions:

1. Infrared motion sensor
2. LED display
3. Button to set device operating time to 10s
4. Button to set device operating time to 30s
5. Button to set device operating time to 60s
6. Button to set device operating time to 99s for free-cure and device time setting
7. Socket

The Ocho Nails lamp is designed for professional use. It allows for quick drying of UV/LED gels and hybrids.

How to Use:

1. Connect the device to the mains.
2. Select the device operating time (10/30/60/99s).
3. Pressing the button again puts the lamp into standby mode.
4. If the hand is inserted without time selection, the device automatically sets the time to 120s.
5. After selecting the operating time in the 10/30/60s range or inserting the hand and activating the lamp via the motion sensor, press and hold the 99s button. This will switch the power from 48W to 65W (the lamp's power can only be changed when the lamp is in the time selection mode or via the motion sensor).
6. Press and hold the 99s button - the device switches to free-cure mode, the power increases gradually.
7. When the operating time is selected in the 10/30/60s range, the time counts down to 0. If the 99s free-cure mode and automatic activation via the motion sensor are selected, the time counts down from 0 to 99s or 120s, depending on the selected option.
8. The 10/30/60/99s buttons have a memory function. When a specific time is selected, the lamp remembers this choice and the next time the hand is placed in the lamp, it will start with the previously selected time.

Device Specifications:

Model: X13

Input Power: 24V 1.5A

Output Power: 65W

LEDs: 36 LEDs (365-405nm)

Power Supply: 36 LEDs (365-405nm):

• Input power 100-240V 0.5A 50-60Hz
• 24V 1.5A output power

Cable Length: 146cm

Device Dimensions: 22x20x10cm

Attention

• Please read the instructions carefully before use.
• Use the included power adapter to avoid damaging the device.
• To avoid damage or electric shock, keep the lamp away from water and other liquids.
• When not using the device, unplug it from the mains.
• Do not use the device if it is damaged.
• Do not use the device if the power adapter is damaged.
• To avoid shortening the lamp's lifespan, it should not last longer than 600s per use.
• Do not look directly into the LED light during use to avoid vision damage.

Safety Measures:

1. The device is a professional device used in cosmetic operations. Use by qualified cosmetologists avoids undesirable effects during treatment.
2. Do not disassemble or attempt to use the device for purposes other than those described in this user manual. All maintenance and repair work must be performed only by an authorized service technician (ACTIV Tomasz Pacholczyk).
3. Do not install or use the device near liquids, damp places, or with wet hands, to prevent liquids from entering the device.
4. In the following cases, immediately unplug the device and contact an authorized service center (ACTIV Tomasz Pacholczyk): a) liquid has entered the device, b) the device emits a strange smell, smoke, or makes strange noise, c) the power cord is damaged, d) the device has fallen or its casing is damaged.
5. Do not place any objects on the cables. Do not place the device in a location where someone can step on the power cord.
6. For safety reasons, unplug the power cord from the socket every time you finish working with the device.
7. Do not insert anything into the device openings. If foreign objects get into the openings, unplug the cable from the socket and contact the dealer or manufacturer.
8. Do not place the device on an unstable cart, shelf, or vehicle. The device may be damaged if it falls.
9. To ensure the permanent life of the device, it is recommended that there be a one-minute interval before pressing the power button again (on and off, and vice versa).
10. The power supply must comply with the specifications on the data plate. Otherwise, there is a risk that the device will not work properly, will be damaged, or even burn out.

Notes:

1. In case of damage to the power cord or other malfunctions, contact an authorized service center - this will avoid danger.
2. This device can be used by children aged at least 8 years and persons with reduced physical and mental abilities, and lacking experience and knowledge of the device, provided that supervision or guidance on how to use the device safely is ensured, so that the associated risks are understood.
3. The device is not intended for children to play with. Do not allow children to play with the device.
4. Do not leave the device unattended if children or persons who do not know how to use the device sufficiently are nearby.
5. This electrical device is not a toy. Improper use or contact with the electrical device can endanger health or cause death, therefore the device should be used and kept out of reach of children.

DEVICE DISPOSAL

Used electrical appliances, lighting, and packaging should be taken to an environmentally friendly recycling center. Do not dispose of electrical appliances in household waste bins. Please follow the regulations regarding the disposal of this type of equipment. To protect the environment, in accordance with Directive 2012/19/EU on waste electrical and electronic equipment, waste electrical equipment must be collected separately and then handed over to collection points for waste electronic and electrical equipment.

Old devices contain fully recyclable components at the end of their service life and should therefore be recycled. They should therefore be handed over to appropriate collection points and can also be handed over to the company ACTIV Tomasz Pacholczyk.

STORAGE AND TRANSPORT

The device must be transported at a temperature of (-) 20 °C to (+) 50 °C only in the original packaging. Store the device in a well-ventilated room where the relative humidity does not exceed 75%. The operating temperature is (+) 10 °C to (+) 40 °C. During storage and transport, the device should not be thrown or dropped, nor should it be exposed to mechanical shocks or weather conditions.