ACTIVESHOP OCHO PRO 8 UV LED Nail Lamp 84W

Product Overview

The ACTIVESHOP OCHO PRO 8 UV/LED Lamp is a professional, next-generation nail lamp designed for rapid and even curing of all gels, hybrid varnishes, and other light-curing nail products. It features Dual LED technology, emitting a comfortable white light that is gentle on the eyes. The lamp boasts a high-performance, energy-efficient light source with a dual wavelength range of 365 nm and 405 nm, powered by 42 LED diodes for a maximum output of 84W. Key features include a motion sensor, a 30-, 60-, and 120-second timer, and a special 120-second "Low Heat Mode" that gradually increases power to prevent discomfort. A clear LCD display shows the remaining time, and a removable base facilitates easy pedicure procedures.

Manufacturer/Distributor: ACTIVESHOP Sp. z o.o.

Address: ul. Graniczna 8b, bud. DC2A, 54-610 Wrocław, Poland

Website: www.activeshop.com.pl

Revision: A/03/2024

Certifications: CE marking [CE]

Technical Specifications

Product Features

1. UV/LED dual light technology for 2x faster curing compared to standard nail lamps.
2. Three timer modes: 30, 60, and 120 seconds. Time can be adjusted according to product type and manufacturer recommendations.
3. Low Heat Mode (120s): Gradually increases power to prevent discomfort and burning sensations during curing.
4. LCD display for easy monitoring of remaining operating time.
5. Removable base for enhanced comfort during pedicure procedures.
6. Automatic infrared sensor: The lamp activates automatically when a hand is inserted.
7. Long-life LED diodes: 42 LED diodes with an extended lifespan of 50,000 hours.
8. Eye and skin protection: Uses soft white light, which is painless and harmless to nails, eyes, and skin, unlike typical purple light.

Important Notes

• Read the instructions carefully before the first use of the lamp.
• Do not look directly into the LED light, as it may damage your vision.
• Do not use the lamp if the power adapter is damaged.
• Prolonged exposure may damage the skin.
• Use only products designed for curing with LED light.
• Unplug the device from the socket when you are finished using it.
• Keep the device out of reach of children.
• Keep the device away from water or other liquids.
• Keep the unit away from flammable and combustible materials.
• The lamp is exclusively designed for curing hybrid varnishes and gel masses, not for regular nail polishes. Ensure your polish is compatible before use.
• Do not immerse the device. Do not disinfect with excessive liquid. Water or disinfectant entering the device can cause damage. It is recommended to maintain the UV/LED bulb with specialized products.

How to Use

1. Connect the power adapter to the lamp. Do not do this with wet or damp hands.
2. Turn on the device using the ON/OFF button to start operation.
3. The unit features three timer buttons: 30S, 60S, 120s. The 120s mode is the "low temperature mode," where power gradually increases to minimize potential discomfort during varnish or gel curing.
4. Inserting your hand into the lamp activates the device via the sensor.
5. The maximum operating time without selecting a specific mode is 120 seconds.

Safety Precautions

1. This device is professional equipment intended for use in cosmetic practices. Operation should be limited to trained cosmetic personnel to prevent adverse effects during treatment.
2. Do not disassemble or attempt to use the device for purposes other than those specified in this manual. All maintenance and repair work must be performed by an authorized service provider (ACTIVESHOP Sp. z o.o.).
3. Do not install or operate the device near liquids, in wet areas, or with wet hands to prevent liquid ingress.
4. In the following situations, immediately unplug the device from the socket and contact the authorized service provider (ACTIVESHOP Sp. z o.o.):
   • Liquid has entered the device.
   • The device emits a strange odor, smoke, or unusual sounds.
   • The power cable is damaged.
   • The device has tipped over or its casing is damaged.
5. Do not place objects on the cables. Ensure the device is not placed where the power cable can be stepped on.
6. For safety, always unplug the power cable from the socket after finishing work with the device.
7. Do not insert foreign objects into the device's opening. If a foreign object enters, unplug the cable and contact the distributor or manufacturer.
8. Do not place the device on unstable surfaces, trolleys, shelves, or vehicles, as dropping it may cause damage.
9. To ensure the device's lifespan, wait one minute before pressing the power button again (when switching between on/off states).
10. The power adapter must match the specifications on the device's nameplate. Using an incompatible adapter poses a risk of malfunction, damage, or burnout.

Additional Notes

• In case of damage to the power cable or other faults, contact an authorized service center to avoid hazards.
• This equipment may be used by children aged 8 and older, and by persons with reduced physical, sensory, or mental capabilities, or with limited experience and knowledge, provided they are supervised or have received instructions on safe use and understand the associated risks.
• The device is not a toy. Do not allow children to play with the device.
• Do not leave the device unattended if children or individuals unfamiliar with its operation are present.
• This electrical device is not a toy. Improper use or contact with the electrical device can endanger health or cause death; therefore, the device must be used and stored out of reach of children.

Device Disposal

Discarded electrical devices, wiring, and packaging should be handed over to recycling centers in accordance with environmental protection regulations. Electrical equipment must not be disposed of in household waste bins. Follow the disposal rules for this type of equipment. To protect the environment in accordance with Directive 2012/19/ES on waste electrical and electronic equipment, used electrical equipment must be collected separately and then delivered to collection points for electronic and electrical waste. Used and old appliances contain recyclable components and should be handed over for recycling at appropriate collection points or to ACTIVESHOP Ltd.

[Recycling symbol]

Storage and Transport

The unit can be transported at temperatures between -20 °C and +50 °C only in its original packaging. Store the unit in a well-ventilated area with relative humidity up to 75%. The operating temperature range is +10 °C to +40 °C. During storage and transport, do not throw, drop, or expose the device to mechanical impacts or atmospheric factors.