STORKLINTA 2-Drawer Nightstand Assembly Instructions

Safety Warnings

⚠️ Children have died from furniture tipover. To reduce the risk of furniture tipover:

ALWAYS install the provided anti-tip device.
NEVER put a TV on this product. ?
NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves. ?
NEVER open more than one drawer at a time. ?
Place heaviest items in the lowest drawers. ⚖️

Tools and Hardware

Tools Required:

Phillips screwdriver ?
Flathead screwdriver ?
Hammer ?
Drill ?
Pencil ✏️

Drill Bits:

Ø 5/16" (8 mm)
Ø 1/8" (3 mm)

Included Hardware:

Parts for Steps 1-18:

8x 118331 (Dowel/Cam Lock Screw)
8x 119250 / 119252 (Cam Lock)
10x 101345 (Wooden Dowel)
2x 102553 (Bracket)
4x 105248 (Screw)
12x 146114 (Screw)
2x 151707 (Plastic Cap/Plug)
2x 151708 (Screw)
4x 10093081 (Drawer Runner Clip)
4x 10093082 (Drawer Runner Clip)
2x 10101849 (Drawer Front Connector)
2x 158568 (Drawer Side Connector)
2x 10107508 (Drawer Runner)

Parts for Steps 19-31:

16x 120076 (Cam Lock)
8x 118331 (Dowel/Cam Lock Screw)
12x 146114 (Screw)
8x 145718 (Dowel/Cam Lock Screw)
8x 101345 (Wooden Dowel)
2x 109048 (Screw)
2x 121714 (Wall Plug)
2x 109049 (Screw)
4x 100823 (Bracket)
2x 106989 (Bracket)

Assembly Steps

Step 1: Prepare Side Panels

Attach drawer runners (part 10107508) to the inner sides of the two main side panels. Use 12 screws (part 146114).

Visual: Two side panels are shown with drawer runners being attached using screws.

Step 2: Insert Dowels

Insert wooden dowels (part 101345) into the designated holes on the base panel. Use 8 dowels.

Visual: A base panel is shown with wooden dowels being inserted.

Step 3: Attach Wall Mounting Brackets

Attach the wall mounting brackets (parts 100823 and 106989) to one of the side panels. Use 2 screws (part 109049).

Visual: A side panel is shown with wall mounting brackets being attached.

Step 4: Insert Dowels

Insert wooden dowels (part 101345) into the designated holes on another panel. Use 4 dowels.

Visual: A panel is shown with wooden dowels being inserted.

Step 5: Attach Base Panel to Side

Connect the base panel to one of the side panels. Use cam lock screws (part 118331) and cam locks (part 119250/119252).

Visual: A side panel is shown being connected to the base panel.

Step 6: Attach Second Side Panel

Attach the second side panel to the base assembly. Use cam lock screws (part 118331) and cam locks (part 119250/119252). Use 8 of each.

Visual: The second side panel is attached to the base.

Step 7: Connect Side Panels at Top

Connect the two side panels together at the top. Use cam lock screws (part 118331) and cam locks (part 119250/119252).

Visual: The two side panels are joined at the top.

Step 8: Attach Back Support Panel

Attach a back support panel to the side panels. Use cam lock screws (part 118331) and cam locks (part 119250/119252). Use 2 of each.

Visual: A back support panel is attached to the main structure.

Step 9: Attach Bracket to Side Panel

Attach bracket (part 102553) to the top edge of a side panel using 2 screws (part 105248).

Visual: A bracket is attached to a side panel.

Step 10: Attach Top Panel with Brackets

Attach the top panel to the main structure using brackets (part 105248) and screws (part 109048). Use 2 brackets and 2 screws.

Visual: The top panel is being attached using brackets and screws.

Step 11: Attach Top Panel with Cam Locks

Secure the top panel further using cam lock screws (part 118331) and cam locks (part 120076). Use 4 of each.

Visual: The top panel is being secured with cam locks.

Step 12: Attach Feet

Attach the feet or base supports to the bottom of the unit. Use 2 screws (part 151708) and 2 plastic plugs (part 151707).

Visual: Feet are being attached to the bottom of the unit.

Step 13: Attach Drawer Slide Components

Attach the drawer slide components (parts 158568 and 10101849) to the inside of the unit. Use 2 of each part.

Visual: Drawer slide components are being attached to the unit's interior.

Step 14: Prepare Drawer Sides with Dowels

Insert wooden dowels (part 101345) into the designated holes on the drawer side panels. Use 4 dowels.

Visual: Drawer side panels are shown with dowels being inserted.

Step 15: Assemble Drawer Box Base

Connect the drawer base panel to the drawer side panels. Use 4 screws (part 118331).

Visual: The drawer base is being attached to the drawer sides.

Step 16: Slide Drawer Back Panel

Slide the drawer back panel into the grooves of the assembled drawer sides and base.

Visual: A back panel is being slid into place on the drawer assembly.

Step 17: Attach Drawer Runners to Drawer Box

Attach the drawer runners to the sides of the assembled drawer box. Use 4 screws (part 146114).

Visual: Drawer runners are being attached to the drawer box.

Step 18: Attach Drawer Front Connectors

Attach the drawer front connectors (parts 10093081 and 10093082) to the front of the drawer sides. Use 2 of each part.

Visual: Drawer front connectors are being attached to the drawer.

Step 19: Attach Wall Mounting Hardware to Unit

Attach the wall mounting bracket assembly to the back of the unit. Follow the detailed diagram for placement and screw usage.

Visual: The wall mounting bracket is being attached to the back of the assembled unit.

Step 20: Position Assembled Unit

Slide the assembled unit into its final position. ➡️

Visual: The unit is shown being moved into place.

Step 21: Wall Mounting Instructions

Secure the unit to the wall using the provided anti-tip device. The screws and plugs supplied can be used with most solid (A) and hollow (B) walls. For solid wood (C), use the screws without plugs. If you are uncertain, seek professional advice.

Wall Types:

A (Solid Wall): Use Ø 5/16" (8 mm) drill bit. Insert plug (121714) and screw (109048).
B (Hollow Wall): Use Ø 5/16" (8 mm) drill bit. Insert plug (121714) and screw (109048).
C (Solid Wood): Use Ø 1/8" (3 mm) drill bit. Use screw (109049) without a plug.

Visual: Diagrams show drilling into different wall types and inserting screws/plugs.

Step 22: Attach Drawer Slides to Unit Interior

Attach the drawer slide mechanisms to the inside of the unit. Use 2x 109048 screws and 2x 100823 brackets.

Visual: Drawer slide mechanisms are being attached to the unit's interior.

Step 23: Drawer Assembly Preparation

Prepare drawer components. This step shows parts for drawer assembly.

Visual: Components for drawer assembly are laid out.

Step 24: Drawer Assembly Preparation

Prepare drawer components. This step shows parts for drawer assembly.

Visual: Components for drawer assembly are laid out.

Step 25: Assemble Drawer Box Sides

Connect the drawer side panels to the drawer base. Follow the diagram for correct orientation.

Visual: Drawer sides are being attached to the drawer base.

Step 26: Complete Drawer Box Assembly

Attach the remaining drawer side panel. Use 4 cam locks (part 120076).

Visual: The drawer box is being completed.

Step 27: Slide Drawer Back Panel

Slide the drawer back panel into the grooves of the assembled drawer box.

Visual: The drawer back panel is being inserted.

Step 28: Attach Drawer Top Panel

Attach the drawer top panel to the drawer box. Follow the diagram for correct placement.

Visual: The drawer top is being attached.

Step 29: Attach Drawer Front

Attach the drawer front to the drawer box. Use 4 screws (part 145718) and 4 cam locks (part 120076).

Visual: The drawer front is being attached to the drawer box.

Step 30: Attach Drawer Runners to Drawer

Attach the drawer runners to the sides of the assembled drawer. Use 6 screws (part 146114).

Visual: Drawer runners are being attached to the drawer.

Step 31: Insert Drawer into Unit

Insert the assembled drawer into the nightstand unit. ➡️

Visual: The drawer is being inserted into the nightstand.

	STORKLINTA Bedside Table Assembly Instructions \| IKEA Step-by-step guide to assembling the IKEA STORKLINTA bedside table. Includes parts list, tools required, and safety warnings for secure installation.
	STORKLINTA Nightstand Assembly Instructions \| IKEA Step-by-step assembly guide for the IKEA STORKLINTA nightstand with two drawers. Includes safety warnings, parts list, and wall mounting instructions.
	STORKLINTA Nightstand Assembly Instructions \| IKEA Step-by-step guide to assembling the IKEA STORKLINTA nightstand. Includes safety warnings and a list of all parts required for assembly.
	STORKLINTA Bedside Table Assembly Instructions Step-by-step assembly guide for the IKEA STORKLINTA bedside table with one drawer. Includes parts list and assembly diagrams.
	MALM 2-Drawer Nightstand Assembly Instructions Comprehensive assembly guide for the IKEA MALM 2-drawer nightstand. Includes a detailed parts list and step-by-step instructions for building the furniture.
	STORKLINTA Nightstand Assembly Instructions Step-by-step assembly guide for the IKEA STORKLINTA nightstand, including a parts list and detailed instructions for building the furniture.
	RÅDMANSÖ Bedside Table Assembly Instructions \| IKEA Step-by-step assembly guide for the IKEA RÅDMANSÖ bedside table. Learn how to build your nightstand with clear instructions, part identification, and safety warnings.
	STORKLINTA Nightstand Assembly Instructions Detailed assembly guide for the IKEA STORKLINTA nightstand, providing step-by-step instructions and a comprehensive parts list. Learn how to build your STORKLINTA nightstand with clear visuals and part identification.