STORKLINTA
Brand: IKEA
Important Safety Information
WARNING
Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install the anti-tip device provided.
- NEVER put a TV on this product. ❌
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time. ❌
- Place heaviest items in the lowest drawers. ⬇️
(Multilingual warnings in French and Spanish are present in the original document but merged into English for primary language output.)
Tools and Hardware for Assembly & Wall Mounting
The following tools and hardware are typically required for assembly and wall mounting. Refer to specific steps for exact usage.
Tools:
- Screwdrivers (Phillips head) ?
- Hammer ?
- Drill ?
- Pencil ✏️
Hardware for Assembly (Refer to Part Numbers):
Various screws, dowels, cam locks, and other connectors are used throughout the assembly process. Specific quantities and types are detailed in each step.
Wall Mounting Hardware:
The supplied screws and plugs are suitable for most solid (A) and hollow (B) walls. For solid wood (C), use screws without plugs. If uncertain, seek professional advice.
Wall Mounting Options:
| Wall Type | Description | Recommended Drill Bit | Hardware |
|---|---|---|---|
| A (Solid Wall) | Use supplied screw and plug. | Ø 5/16" (8 mm) | Screw (109048), Plug (121714) |
| B (Hollow Wall) | Use supplied screw and plug. | Ø 5/16" (8 mm) | Screw (109048), Plug (121714) |
| C (Solid Wood) | Use supplied screw without plug. | Ø 1/8" (3 mm) | Screw (109049) |
(Diagrams show drill bits and screws for different wall types.)
Assembly Instructions
Step 1
Prepare the base panels. Attach the drawer runners to the two main base panels using screws (146114). Ensure the runners are oriented correctly.
(Diagram shows two base panels with drawer runners being attached using screws. Magnified view shows screw insertion. Part numbers 10107508 and 146114 are visible.)
Step 2
Attach the side support pieces to the base panels. Insert dowels (118331) into the pre-drilled holes on the base panels and then connect the side support pieces.
(Diagram shows side support pieces being attached to the base panels using dowels. Magnified view shows dowel insertion. Part number 118331 is visible.)
Step 3
Attach the wall mounting brackets to the side panels. Use screws (100823) and wall plugs (109049) if mounting to a wall, or screws (100823) directly into the panel if not wall-mounting. Secure the bracket (106989) to the side panel.
(Diagram shows wall mounting brackets being attached to the side panels. Magnified view shows screw and bracket attachment. Part numbers 100823, 109049, and 106989 are visible.)
Step 4
Insert dowels (101345) into the designated holes on the bottom edge of the main side panels.
(Diagram shows dowels being inserted into the bottom edge of the side panels. Magnified view shows dowel insertion. Part number 101345 is visible.)
Step 5
Attach the back panel to the base and side panels. Align the back panel with the grooves and secure it.
(Diagram shows the back panel being slid into place and attached to the base and side panels.)
Step 6
Connect the remaining side panel. Use cam locks (119250, 119252) to secure the panel to the base and back panels.
(Diagram shows the second side panel being attached. Magnified view shows cam lock mechanism being tightened with a screwdriver. Part numbers 119250 and 119252 are visible. A crossed-out image shows incorrect cam lock usage.)
Step 7
Attach the second side panel to the partially assembled frame.
(Diagram shows the second side panel being attached to the structure.)
Step 8
Secure the second side panel using cam locks (119250, 119252). Ensure the panel is firmly attached.
(Diagram shows cam locks being used to secure the second side panel. Magnified view shows cam lock mechanism. Part numbers 119250 and 119252 are visible. A crossed-out image shows incorrect cam lock usage.)
Step 9
Attach the top support rail. Use screws (105248) and brackets (102553) to secure the top support rail to the side panels.
(Diagram shows the top support rail being attached. Magnified view shows screw and bracket attachment. Part numbers 102553 and 105248 are visible. A 'no' symbol is shown for incorrect placement.)
Step 10
Slide the bottom panel into place. Insert it into the grooves at the bottom of the unit and secure it with screws.
(Diagram shows the bottom panel being slid into place and secured with screws. Magnified view shows screw insertion. Part number 105248 is visible.)
Step 11
Attach the top panel. Place the top panel onto the assembled frame and secure it.
(Diagram shows the top panel being placed and secured.)
Step 12
Secure the top panel using screws (151707, 151708). Insert the screws through the designated holes on the underside of the top panel into the frame.
(Diagram shows screws being inserted to secure the top panel. Magnified view shows screw insertion. Part numbers 151707 and 151708 are visible.)
Step 13
Attach the drawer slides to the inside of the cabinet. Use screws (10101849) to fix the slides (158568) to the side panels.
(Diagram shows drawer slides being attached to the cabinet sides. Magnified view shows screw and slide attachment. Part numbers 10101849 and 158568 are visible.)
Step 14
Prepare the drawer sides. Insert dowels (101345) into the drawer side panels.
(Diagram shows dowels being inserted into drawer side panels. Magnified view shows dowel insertion. Part number 101345 is visible.)
Step 15
Attach the drawer front panel to the drawer sides. Use dowels (118331) to connect the drawer front to the drawer sides.
(Diagram shows the drawer front being attached to the drawer sides using dowels. Magnified view shows dowel insertion. Part number 118331 is visible.)
Step 16
Attach the drawer back panel. Slide the drawer back panel into the grooves of the drawer sides and secure it.
(Diagram shows the drawer back panel being slid into place.)
Step 17
Attach the drawer bottom panel. Slide the drawer bottom panel into the grooves and secure it. Use cam locks (119250, 119252) to secure the drawer front and back to the sides.
(Diagram shows the drawer bottom panel being inserted and secured. Magnified view shows cam lock usage. Part numbers 119250 and 119252 are visible.)
Step 18
Attach the drawer handles. Use screws (10093081, 10093082) to fix the handles to the drawer front.
(Diagram shows drawer handles being attached. Magnified view shows screw insertion. Part numbers 10093081 and 10093082 are visible.)
Step 19
Attach the drawer runners to the assembled drawer box. Use screws (105248) and brackets (102553) to fix the drawer runners to the sides of the drawer box.
(Diagram shows drawer runners being attached to the drawer box. Magnified view shows screw and bracket attachment. Part numbers 102553 and 105248 are visible.)
Step 20
Insert the assembled drawer into the cabinet. Slide the drawer onto the runners inside the cabinet.
(Diagram shows the assembled drawer being inserted into the cabinet.)
Step 21
Wall mounting instructions: Choose the appropriate method (A, B, or C) based on your wall type. Follow the diagrams carefully to drill holes, insert plugs if necessary, and secure the furniture to the wall using the provided anti-tip hardware.
(Diagrams show three methods for wall mounting: A for solid walls, B for hollow walls, and C for solid wood. Each method details drilling, plug insertion, and screw attachment. Includes recommended drill bit sizes and screw types.)
Step 22
Secure the furniture to the wall using the anti-tip device. Attach the bracket to the furniture and the wall, ensuring it is firmly fastened.
(Diagram shows the anti-tip device being attached to the furniture and the wall. Magnified view shows screw insertion. Part numbers 109048 and 100823 are visible.)
Step 23
Prepare the second drawer assembly. Insert dowels (118331) into the drawer front panel.
(Diagram shows dowels being inserted into a drawer front panel. Magnified view shows dowel insertion. Part number 118331 is visible.)
Step 24
Assemble the second drawer box. Insert dowels (101345) into the drawer side panels.
(Diagram shows dowels being inserted into drawer side panels. Magnified view shows dowel insertion. Part number 101345 is visible.)
Step 25
Attach the drawer sides to the drawer front panel. Align and secure the side panels to the front panel.
(Diagram shows drawer side panels being attached to the drawer front panel.)
Step 26
Attach the drawer back panel. Slide the drawer back panel into the grooves and secure it. Use cam locks (120076) to connect the drawer sides to the back panel.
(Diagram shows the drawer back panel being attached. Magnified view shows cam lock usage. Part number 120076 is visible.)
Step 27
Slide the drawer bottom panel into place.
(Diagram shows the drawer bottom panel being slid into place.)
Step 28
Attach the drawer front panel to the assembled drawer box. Align and secure the front panel.
(Diagram shows the drawer front panel being attached to the assembled drawer box.)
Step 29
Attach the drawer runners to the second drawer box. Use cam locks (120076) and screws (145718) to fix the drawer runners to the sides of the drawer box.
(Diagram shows drawer runners being attached to the second drawer box. Magnified view shows cam lock and screw insertion. Part numbers 145718 and 120076 are visible.)
Step 30
Attach the drawer slides to the cabinet. Insert the drawer slides into the cabinet and secure them with screws (146114).
(Diagram shows drawer slides being attached to the cabinet. Magnified view shows screw insertion. Part number 146114 is visible.)
Step 31
Insert the second assembled drawer into the cabinet. Slide the drawer onto the runners.
(Diagram shows the second assembled drawer being inserted into the cabinet.)
Product Information
Product Name: STORKLINTA Bedside Table
Brand: IKEA
Article Number: 805.611.53 (from external metadata)
Document Identifier: AA-2413748-3
Designed and Quality Checked by IKEA of Sweden.
YouTube
