Safety Warnings
⚠️ WARNING: Delicate table - Do not sit on the product.
⚠️ WARNING: Delicate table - Do not place heavy objects on this product, maximum load 25 kg (55 lb).
Parts List
The following parts are required for assembly. Quantities are indicated.
Group 1
- 8x Part 118331
- 8x Part 120076
- 10x Part 101345
- 2x Part 10050771
- 4x Part 146114
- 6x Part 10107508
- 2x Part 10050769
- 2x Part 10093081
- 2x Part 10095326
- 2x Part 10093082
- 2x Part 10095315
- 2x Part 10101849
- 2x Part 158568
Group 2
- 8x Part 119252
- 4x Part 118331
- 6x Part 146114
- 4x Part 101345
- 4x Part 102553
- 4x Part 105248
Assembly Instructions
Follow these steps to assemble your STORKLINTA nightstand.
Step 1
Attach wheel mechanisms (6x Part 146114) and a runner component (1x Part 10107508) to two side panels using a screwdriver ?. Ensure the components are oriented correctly as shown.
Step 2
Attach components (4x Part 118331) to two panels using a screwdriver ?.
Step 3
Attach components (4x Part 101345) to a panel using a screwdriver ?.
Step 4
Connect two panels together using screws, as shown.
Step 5
Connect more panels using cam locks (2x Part 119252) and cam dowels (2x Part 120076). Insert cam dowels into one panel and then secure with cam locks in the connecting panel, turning the cam locks ⚙️ to tighten.
Step 6
Assemble the main frame of the cabinet by connecting the base, sides, and back panels using the provided hardware.
Step 7
Attach components (2x Part 119252) to the assembled frame using cam locks and dowels.
Step 8
Attach a support bar to the frame using screws (2x Part 102553) and corresponding nuts/inserts (2x Part 105248).
Step 9
Attach another support bar to the frame using cam locks (2x Part 119252) and dowels.
Step 10
Attach drawer runners (2x Part 10101849 and 2x Part 158568) to the inside of the cabinet side panels using screws.
Step 11
Slide a panel into the grooves of the assembled cabinet.
Step 12
Attach the top panel to the cabinet frame using screws (2x Part 10050769 and 2x Part 10050771).
Step 13
Attach components (6x Part 101345) to the assembled cabinet structure.
Step 14
Prepare the drawer front by attaching components (4x Part 118331) to it.
Step 15
Attach the drawer front to the partially assembled drawer box.
Step 16
Attach drawer runners (4x Part 119252) to the sides of the drawer box using screws.
Step 17
Attach the remaining drawer runners/guides (2x Part 10093081, 2x Part 10095326, 2x Part 10093082, 2x Part 10095315) to the drawer sides.
Step 18
Attach components (4x Part 118331) to a panel.
Step 19
Attach components (4x Part 101345) to two panels.
Step 20
Assemble the drawer sides and back panel, connecting them to the drawer base.
Step 21
Secure the drawer box structure using cam locks (4x Part 120076) and cam dowels.
Step 22
Slide the drawer bottom panel into the grooves of the assembled drawer box.
Step 23
Attach the drawer front to the completed drawer box.
Step 24
Attach components (4x Part 145718) to the cabinet structure.
Step 25
Attach components (4x Part 120076) to the cabinet structure using cam locks and dowels.
Step 26
Attach the final drawer runners/guides (6x Part 10103472, 6x Part 146114) to the drawer.
Step 27
Insert the assembled drawer into the nightstand cabinet. The arrow indicates the direction of insertion.