Q6L Dash Cam User Manual

Product Accessories

After opening the package, please confirm that the driving recorder is in good condition and all accessories are present.

• Host x 1
• Cameras x 2
• Wired Remote Controller x 1
• USB Test Cable x 1
• Cable Ties x 1 Set
• Bracket x 1
• Memory Card x 1 (Optional)
• GPS Module x 1 (Optional)
• Power Cable x 1
• Signal Enhancer x 1
• Wire Clips x 1 Set

"Optional" items are not standard configurations. Please refer to the product description on the purchasing platform.

Product Specifications

Product Features

• The front and rear cameras record simultaneously.
• WiFi interconnection (available on Android and iOS).
• Loop recording.
• Emergency recording (Automatic/Manual).
• Support 8GB-256GB memory card.
• The recorder is powered continuously by the motorcycle battery.
• Automatic power on/off.

Install Product

Installation Diagram Description: The diagram illustrates the placement of components on a motorcycle. A waterproof camera is mounted at the front, connected via an extension cable to the main unit. The main unit is typically placed discreetly. A waterproof wire controller is shown, suggested for handlebar installation. An optional waterproof GPS module is also depicted, requiring clear sky visibility and a specific distance from the main unit to avoid signal interference.

Power Cable: Connects to the motorcycle's power source.

Waterproof Camera: Front and rear cameras capture video.

Waterproof Wire Controller: Provides control and feedback.

Waterproof GPS Module (Optional): Enhances location tracking. It requires unobstructed sky view and should be placed approximately 30CM from the camera and main unit to prevent signal interference.

Note: The picture and text are for reference only; please refer to the actual object.

How to Use

1. Quick Test and Installation

   Please refer to the "Quick Installation Guide" for detailed steps.

2. Insert the Memory Card

   Insert the memory card into the card slot until you hear a click ("Da"). To remove the card, gently press it and slowly release after hearing the click.

   Tips:

   • Insert the memory card in the correct direction.
   • Do not pull out or insert the card while the recorder is powered on to avoid damaging video files and the recorder.
   • Use a high-speed Class 10 or above genuine memory card.
   • Format the memory card regularly to maintain optimal condition.

3. Power on/off

   After proper installation, the recorder automatically turns on when the motorcycle ignition is turned on and turns off when the ignition is turned off.

4. Video Recording

   Normal Recording Mode: The recorder starts automatically when the motorcycle power is on. The LED indicator on the remote controller flashes slowly. It stops automatically when the power is off. Loop recording saves files in segments (default 3 minutes). When the memory card is full, the oldest file is deleted. Recording time per segment can be set via the APP (1/2/3/5 minutes). Front and rear camera files are saved in 'F' and 'R' folders respectively. Normal files are named "REC-xxxx".

   Emergency Recording Mode:

   • G-Sensor Emergency Recording: Activated by strong vibrations or collisions. The LED indicator flashes rapidly. Files are named "GSR-xxxx". G-sensor sensitivity can be adjusted in the menu or APP.
   • Manual Emergency Recording: Short press the red button on the wired remote controller to lock the current video. Both front and rear cameras capture a photo simultaneously. Locked files are named "KEY-xxxx".

   Tips: "KEY" and "GSR" emergency video files are limited to 10 each; older files are deleted when new ones are added.

5. View Video

   1) View on Mobile Phone: Connect the recorder via WiFi to view real-time and playback video on the mobile APP (Android & iOS).

   2) View on Computer: Insert the memory card into a USB card reader and connect it to a computer to access and play video files.

   APP Download and Connection: Scan the provided QR codes (or search "WiFi Camera" on Google Play/App Store) to download the APP. The default WiFi name is VSYSTO_XXX, and the default password is 1234567890.

   Connection Steps:

   1. Turn on the recorder.
   2. On your phone, go to WiFi settings, find the recorder's WiFi name (VSYSTO_XXX), and enter the password (1234567890) to connect.
   3. Open the mobile APP and connect to the recorder.

   APP Usage Tips:

   • If "No network connection" appears, disable your phone's mobile data first. If prompted to switch networks, select "No".
   • The recorder pauses recording when the APP is active. Click the red record button in the APP to resume. Recording resumes automatically 30 seconds after exiting the APP.
   • WiFi connection is only needed for viewing videos, not for daily riding.
   • Contact customer service for connection failures.

   APP Interface Description: The app interface allows switching between front and rear cameras, selecting files for download or deletion, and accessing settings. It is recommended to set G-sensor sensitivity (GST) to Level 0 or Level 1 for optimal performance.

6. Video File Format

   Files are named using the format: REC_YYYYMMDD-HHMMSS-NNNNF.MOV or REC_YYYYMMDD-HHMMSS-NNNNR.MOV, where YYYYMMDD is Year-Month-Day, HHMMSS is Time, NNNN is a sequence number, and F/R indicates Front/Rear camera.

Quick Installation Guide

1. Quick Test

   1. Connect the front and rear cameras to the recorder host.
   2. Connect the recorder to a 5V2A power source (power bank or USB charger) using the USB test cable. Test all functions.
   3. Once the recorder functions normally, proceed with installation.

   Caution: Using an output voltage exceeding 5V may damage the recorder. Use the test cable with a power bank or charger plug for the initial test before final installation.

2. Shock Absorption Camera Bracket

   Install the camera body onto the bracket. Tighten the screws to secure it after adjusting the angle. Ensure the concave and convex bayonets of the joint match correctly.

   Extension Cable: During installation, it's recommended to connect the extension cable first, then connect the host and camera separately for easier handling. If the distance between the main unit and camera is less than 0.5 meters, the extension cable may not be necessary.

3. Installing the Power Cable

   ACC Power Cable Connection Method:

   • Red wire: Connect to the positive pole of the motorcycle battery.
   • Black wire: Connect to the negative pole of the motorcycle battery.
   • Yellow wire: Connect to the positive pole of the motorcycle key control (12V ACC power source).

4. Wired Remote Controller Operating Instruction

   1) Blue Button: If the remote control vibrates abnormally after inserting the memory card and connecting the camera, it may indicate a fault. Long-pressing the blue button can stop the vibration.

   2) Red Button:

   • Short press: Enter emergency video mode. The motor vibrates once, and a photo is taken simultaneously.
   • Long press: Reset the WiFi password and name.

   3) LED Indicator Light:

   • Slowly flashing: Normal recording.
   • Fast flashing: Emergency recording.
   • Always on: Standby state.
   • No flashing: Shutdown state.

   4) Troubleshooting Vibration: If the wire controller motor vibrates continuously, check if the recorder is recording normally and if the front/rear cameras display images. Continuous vibration may indicate recorder failure (abnormal recording, no camera images, or inability to read memory card). The wire controller cannot be operated while using the APP.

   Installation of Remote Controller: Tear off the double-sided adhesive tape on the remote controller and stick it to a suitable position on the motorcycle, such as the handlebar.

   Waterproof Rating: The device has an IP65 Waterproof Level, allowing normal use in rainy conditions.

   Cable Management: Secure and hide excess cables using cable ties.

GPS Module (Optional)

Installation: Connect the GPS module to the power cable interface and the black interface of the host. Ensure the concave and convex bayonets match correctly.

Orientation: The "GPS" icon on the GPS module must face the sky directly. Avoid placing anything above it to prevent signal shielding.

Cable Management: Use cable ties to secure and hide excess cables.

Waterproof Rating: IP65 Waterproof Level (suitable for use in rainy conditions).

Attachment: Use the double-sided adhesive tape on the bottom of the GPS module to attach it to the proper position on the motorcycle.

Notes

• This product is an auxiliary vehicle driving recorder for safe driving. The company is not liable for any losses caused by malfunction, information loss, or misuse.
• As an auxiliary device for recording external vehicle images, some functions may not be supported due to varying driving environments. Firmware upgrades may alter product performance. Environmental factors or memory card status can sometimes prevent recording. Recorded driving images are for reference only.
• While the product records accident videos, it does not guarantee that all accident videos will be captured, especially minor collisions that may not trigger the G-sensor.
• Always disconnect the power supply before inserting or removing the memory card. For stable use, it is recommended to format the memory card twice a week.
• Memory cards have a limited service life. Long-term use may lead to inability to save new data. Consider purchasing a new memory card. The company is not liable for data destruction due to prolonged memory card usage.
• Do not clean the host, camera, or power module with high-pressure water guns or chemical solvents, as this will void the warranty.
• Avoid using the product in environments with excessive dust density to prevent contamination that could affect video quality.
• Do not twist cables or connectors during installation. Keep the recorder host and wires away from high-pressure areas.
• If interference occurs with certain motorcycle models, replace the spark plug with one having an appropriate 'R' value.
• Do not disassemble, modify, or repair the equipment yourself. Doing so will result in no after-sales service.
• Product functions and specifications may change due to upgrades. Such changes will not be individually notified.
• For safety, do not install or operate the product while driving. Use it within legal limits.