B6 Dash Cam User Manual

Preface

Welcome to VSYSTO products! This manual provides guidance for installing and using the B6 Dash Cam. Please read it carefully to maximize your product experience. Improper operation may lead to data loss. Keep the product and manual safe and back up your data regularly.

While efforts have been made to ensure accuracy, this manual may contain errors or omissions. Please contact VSYSTO for any feedback. Images are for reference; refer to the actual product if discrepancies exist. VSYSTO reserves the right to modify products and manual content without prior notice.

VSYSTO is not liable for data loss or indirect losses due to misoperation, maintenance, or other issues. Please back up your data. For the latest information or any questions, contact your local distributor or online customer service.

Matters Needing Attention in Using the Dash Cam

• This product is an auxiliary driving recorder. VSYSTO is not responsible for losses caused by malfunction or misuse.
• The driving images recorded are for reference only, as environmental factors and firmware upgrades can affect performance. TF card status also impacts recording.
• While the product can record accidents, it does not guarantee all accident videos are saved, especially for minor collisions that may not trigger the G-sensor.
• Disconnect power before inserting or removing the TF memory card.
• Format the TF card at least once a week for stability.
• TF cards have a limited lifespan; replace them periodically to prevent data loss. VSYSTO is not liable for data destruction due to long-term use.
• Do not install or operate the product while driving.
• This device may interfere with medical equipment. Consult a doctor or manufacturer if you have concerns.
• Avoid strong impacts or vibrations to prevent damage and malfunction.
• Do not use in excessively dusty environments, as dust can affect camera performance.
• Stop using the product before cleaning and maintenance.
• Do not use chemical solvents or detergents for cleaning.
• Unauthorized disassembly or modification is prohibited.
• The operating temperature range is -20°C to 65°C. Exceeding this may cause malfunction, fire, or explosion.
• Use the product within legal limits.
• Consult your vehicle manual or a professional to ensure compatibility. Do not install if it affects performance, driving, or insurance.
• Manufacturer and distributor are not responsible for damage due to improper installation or usage.

Packing List

Confirm the recorder and accessories are complete upon opening the package:

• Dash Cam Main Unit x 1
• Cameras x 2
• Power Cable x 1
• USB Test Cable x 1
• Bracket x 1
• TF Memory Card (Optional) x 1
• Wired Controller x 1

Diagram of Product Appearance

The manual applies to 2-inch screen and screenless dash cams. Ignore screen-related functions if your model lacks a display.

Device Overview:

• Screen: Displays information and video feed.
• Card Slot: For TF memory card insertion.
• Buttons (Front): MENU/Switch, Up, Down, MODE/OK.
• Ports (Side): Camera 1, Camera 2, Wired Controller, Power Cable/Two Interface.

Diagram of Product Connection

The product structure and parameters may be updated. The diagram is for reference only.

Connection Diagram Description:

• The main unit connects to two cameras, a GPS tracker (optional), a power module, and a wired controller (optional) via designated cables.
• The power module connects to the motorcycle's power source (battery and ignition).
• Ensure correct cable connections, often indicated by color or connector type.

Images Information and Menu Description

Video Mode: Press MODE to enter Video Mode. A white frame indicates the selected function.

• Recording: Indicates the device is actively recording.
• Time Information: Displays current date and time.

Playback Mode: Press MODE to enter Playback Mode. Press MODE again to select videos for playback.

• F/ indicates front camera video replay.
• R/ indicates rear camera video replay.
• Long press MODE for 3 seconds to switch between front and rear camera file lists.
• File Naming Convention:
• Front Camera: REC_YearMonthDay-HourMinuteSecondF.MOV
• Rear Camera: REC_YearMonthDay-HourMinuteSecondR.MOV

Menu Setting: Press MODE to enter Menu Setting.

Language Setting Mode: Press MODE to enter Language Setting Mode.

• ☑ Language identification: Corresponds to the selected language.
• The number of language choices depends on the actual model.

Mobile Phone APP Installation and Operation Instructions

The WiFi APP allows mobile phone control of the Vsysto DVR device via Wi-Fi. Preview, playback, and manage camera files and settings.

App Download:

• Scan the provided QR codes for Android (Google Play) or Apple (App Store) to download the latest APP.
• Alternatively, search for "WiFi Camera" on Google Play or the App Store.

Conditions of Use:

• Smart terminal with Android 5.0+ or Apple iOS.
• A Vsysto DVR device.
• Connect mobile phone WiFi to the camera correctly.

WiFi Default Information:

• DVR WiFi Default Name: MotoDV_XXX
• Default Password: 1234567890

Keep the APP updated for optimal function.

Time Synchronization

After connecting the mobile phone to the DVR via WiFi and opening the APP, the time will synchronize automatically upon receiving the "Instruction succeeded" prompt.

Live Preview (video/photo)

Connect DVR WiFi to your phone, open the APP, and tap "Connect Device" to enter video preview. You can record and take photos. Tap the screen icon [camera-switch-icon] to switch between front and rear cameras if applicable. Tap the full-screen icon [fullscreen-icon] for a larger view.

Browse DVR Files

In the APP's "Online" section, tap the folder icon [folder-icon] to browse files stored on the DVR's memory card.

Replay DVR Files

In the "Online" interface, tap a file to replay it. Use the icon [switch-camera-icon] in the upper left to switch between front (F) and rear (R) camera files.

Download or Delete DVR Files

In the "Online" interface, tap "Edit" to select files for download or deletion. Then, tap "Save" or "Delete" as needed.

Local Files Management

Tap the "Local" tab to browse, replay, or delete files stored on your mobile phone. Operations are similar to the online interface.

DVR Parameter Setting

Access the parameter setting interface within the APP to configure DVR settings, including the WiFi name and password (Set SSID).

Quick Installation Guide

Preliminary Test

1. Connect Camera 1 and Camera 2 to the DVR host.
2. Use the provided USB power cable to connect to a power bank or USB adapter for a quick test.
3. Proceed with installation if the test is successful.

Instructions of the Matched 12V→5V Power Module

• Normal Version: Connect the red wire to the battery positive (+), black wire to the battery negative (-), and yellow wire to the 12V port controlled by the ignition key (ACC port).
• Smart Version: Connect as the normal version. The power module requires occasional movement (waggle) every 3 minutes to maintain power supply; otherwise, it will cut off automatically.

Quick Installation Steps:

1. Identify suitable locations for the front & rear cameras, wired controller (optional), main unit (typically under the seat), and GPS tracker (optional).
2. Plan the routing for all cables (camera, controller, GPS, power) before installation.
3. Securely fix and connect all components using 3M tape, screws, or cable ties.
4. Power Module Connection:
   • Normal Power Module: Connect red wire to battery positive, black wire to battery negative, yellow wire to the ACC port.
   • Smart Power Module: Connect red wire to battery positive, black wire to battery negative. The DVR turns on with the engine and off after the engine stops.

Installation methods vary by motorcycle model. Cable connection definitions may differ. Keep camera and lens cables away from high-voltage circuits like xenon lamps or ignition plugs. For interference issues on carburetor systems, consider changing the R-value ignition plug.

Quick Adjustment

1. Remove the lens cap. View the screen and rotate the lens body to adjust the horizontal view angle.
2. Power Module Operation:
   • Normal Power Module: DVR turns on/off with the engine.
   • Smart Power Module: DVR turns on when the engine starts and off when the engine stops.

Accessories Installation

Damping Bracket

1. Place the rubber damping ring onto the camera body.
2. Mount the camera body onto the bracket. Adjust the angle and tighten screws to secure it.

Cameras

Ensure the concave and convex bayonets of the connectors match correctly.

• It is recommended to install the extension cable first, then connect the main unit and camera separately for easier installation.
• If the distance between the main unit and camera is less than 0.5 meters, the extension cable may not be needed. Keep it for future use.

Adjust the bracket to achieve the desired horizontal view angle by observing the screen or smartphone. Secure the bracket using the provided double-sided foam tape (for upward mounting) or screws (for downward mounting).

Battery Power Cable (Optional)

Ensure correct bayonet matching. Connect the red wire to the battery anode (+) and the black wire to the battery cathode (-). Connect the "U" shape terminal cable to the power module *after* connecting to the battery to prevent voltage fluctuations from damaging the module.

Fix the power module to a suitable location on the motorcycle using double-sided foam tape.

ACC Power Cable (Optional)

Connect the red wire to the battery anode (+), the black wire to the battery cathode (-), and the yellow wire to a 12V wire controlled by the ignition key.

Fix the wired controller to a suitable location on the motorcycle using double-sided foam tape.

Wired Controller

Fix the wired controller to a suitable location on your motorcycle using double-sided foam tape.

• LED Light: Indicates the DVR's working status.
• Buttons: Short press any button to save an emergency video file and take a snapshot. Both buttons have the same function.

Wired Controller Indicator Light Description:

• Slow flash: Normal video recording.
• Quick flash: Emergency video started; front and rear cameras take a picture simultaneously. The indicator light flashes quickly. When the current emergency video is recorded, the controller resumes slow flashing.
• Constant light: DVR is in standby state.
• Note: Files generated by the wired controller are named with "KEY".

GPS Module (Optional)

Ensure correct bayonet matching. The "GPS" icon must face the sky.

Fix the GPS module to a suitable location on your motorcycle using double-sided foam tape. Ensure the "GPS" icon faces the sky directly without obstructions to avoid signal shielding.

Troubleshooting

ATTENTION: WiFi Connection Solutions for Some Mobile Phones

• Android: Turn off mobile data before connecting to DVR's WiFi. Click "YES" if prompted "Trust this Network" to ensure faster video file transfer.
• iOS: Allowing mobile data usage while connected to DVR's WiFi is possible but may affect download speeds.