MiBoxer FUT088 RGB+CCT Full Touch Remote

1. Features

This product utilizes the globally adopted 2.4 GHz frequency with GFSK control method, offering low power consumption, long-distance transmission, strong anti-interference capabilities, and a fast communication rate. It features a high-precision touch IC for stable and sensitive control, allowing adjustments to color, color temperature, saturation, and brightness for compatible Mi-Light / MiBoxer smart lights.

2. Product Key Diagram

The remote features a color ring for color selection. In white light mode, it adjusts color temperature; in color light mode, it changes color saturation. A brightness slider controls the brightness. There is a dedicated button 'W' for white light. The 'ON' button turns on the linked device, and the 'OFF' button turns it off. Specific buttons are available for static red light ('R'), static green light ('G'), and static blue light ('B'). A dynamic mode switching button ('❩') cycles through dynamic modes. Pressing the speed button ('❩') accelerates the speed in dynamic mode or initiates a 10-minute delay off in static mode (indicated by a single light flash upon 2-second press). Pressing the slow button ('❩') slows the speed in dynamic mode or initiates a 60-second delay off in static mode (indicated by a single light flash upon 2-second press).

3. Linking Code / Unlinking Code Instructions

The light must be linked with the remote to function.

Linking Code Instructions

To link:

1. Turn off the light, wait for 10 seconds, then turn it on again.
2. Short press the 'ON' / Link button 5 times within 3 seconds when the light is on.
3. If the lights blink 3 times slowly, linking is successful. If the light does not blink slowly, please repeat the steps. A light that has already been linked cannot be linked again.

Unlinking Code Instructions

To unlink:

1. Turn off the light, wait for 10 seconds, then turn it on again.
2. Short press the 'ON' / Link button 5 times within 3 seconds when the light is on.
3. If the lights blink 10 times quickly, unlinking is successful. If the light does not blink quickly, please repeat the steps. Lights that have not been linked do not require unlinking.

4. Attention

• This remote is designed exclusively for specified Mi-Light / MiBoxer products. Not all Mi-Light / MiBoxer series are compatible with this remote.
• If the indicator light on the remote blinks rapidly during use, please replace the battery promptly. Avoid using low-quality batteries to prevent leakage that could damage the remote.
• This 2.4 GHz remote is a precision electronic product. Avoid using it in humid, high-temperature, dusty, or high-voltage environments. Store it in a dry, indoor environment free from static electricity.
• Do not operate the remote in areas with wide-range metal surfaces or strong electromagnetic waves, as this can significantly affect the control distance.