CCT Remote
Model No.: C3
Product Features
- 2.4GHz wireless transmitting technology: fast transmission, stable signal, and anti-interference.
- Controls multiple devices simultaneously.
- Adjustable CCT (Correlated Color Temperature) and brightness.
- Compatible with Miboxer/Milight 2.4G controllers and light series.
- Control distance: 30 meters.
- Magnetic installation.
- Suitable for commercial, hotel, and home lighting applications.
Product Parameters
| Product Name | CCT remote |
| Model No. | C3 |
| Working voltage | 3V (AAA*2PCS) |
| Standby consumption | 15µA |
| Transmission | 6dBm |
| Protocol | 2.4GHz RF |
| Modulation | GFSK |
| Control Distance | 30M |
| Working temperature | -10~40°C |
| EMC standard (EMC) | ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-3 V2.3.2 |
| Security Standard (LVD) | EN 61347-2-11:2001+A1:2019, EN 61347-1:2015+A1:2021, EN 62493:2015+A1:2022 |
| Radio equipment (RED) | ETSI EN 300 400 V2.2.1 |
| Certification | CE, EMC, LVD, RED |
Remote Overview
The remote features a brightness/CCT slider, an ON button, and an OFF button. The ON button also serves for linking/unlinking and switching CCT mode. Short press the ON button to turn on the light, and short press again to activate CCT mode.
Functions
Dim Brightness
When the indicator light is red, use the up and down controls on the slider to change brightness.
Dim CCT
Turn on the light and short press the "ON" button once. The indicator will turn orange, signifying CCT mode activation. Use the up and down controls on the slider to change the color temperature.
Link/Unlink Procedures
Link
The controller must be linked with the remote before use.
- Ensure the power supply is connected to the light.
- Turn off the light for 10 seconds, then turn it back on.
- Within 3 seconds of turning the light back on, short press the "ON" button 3 times.
- The link is successful when the light flashes 3 times slowly. If the light does not flash, repeat the steps. Note: Linking cannot be performed again if the remote has already finished linking.
Unlink
- Ensure the power supply is connected to the light.
- Turn off the light for 10 seconds, then turn it back on.
- Within 3 seconds of turning the light back on, short press the "ON" button 5 times.
- The unlink is successful when the light flashes 5 times quickly. If the light does not flash, repeat the steps. Note: Unlinking is not necessary if the light has never been linked.
Installation
- Remove the sticker from the back of the remote holder.
- Attach the holder to the wall and place the remote onto the holder. The holder has a magnetic design for easy attachment.
Attention
- For controlling MiBoxer/Mi-Light 2.4G series products, please refer to the respective product manuals for compatibility information.
- Avoid using the remote in humid or high-temperature environments. If not in frequent use, remove the batteries and store the remote in a dry area, away from static electricity.
- Do not use the remote near metal objects or strong magnetic fields, as this can affect the signal and reduce the control distance.
