Viomi V-RVCLM21B Robot Vacuum Cleaner
User Manual
Introduction
Welcome to the user manual for the Viomi V-RVCLM21B Robot Vacuum Cleaner, also known as the Viomi V2 Pro. This guide provides comprehensive instructions to help you set up, operate, and maintain your smart cleaning device for optimal performance.
Safety Precautions
Please read and follow all safety instructions before using the Viomi robot vacuum cleaner.
- ⚠️ Electrical Safety: Use only the provided charging adapter. Do not use if the cord or plug is damaged. Keep the adapter and charging dock away from water.
- ⚠️ Operational Safety: Keep children and pets away from the robot while it is operating. Remove loose objects, cables, and fragile items from the floor before cleaning. Avoid using the robot in wet environments or on surfaces with exposed electrical wires.
- ⚠️ Battery Safety: Do not attempt to disassemble or replace the battery. Contact authorized service personnel for battery issues.
- ℹ️ General Use: This appliance is intended for household use only.
Product Overview
The Viomi V-RVCLM21B is a smart robot vacuum cleaner designed for efficient floor cleaning. It features advanced navigation, powerful suction, and intelligent mapping capabilities.
Key Components:
- Robot Vacuum Cleaner Unit
- Charging Dock
- Power Adapter
- Dustbin
- Main Brush
- Side Brushes
- HEPA Filter
Diagram Description: Robot Unit
The robot unit is a circular device with a smooth top surface. On the top, you typically find power/mode buttons and indicator lights. The front houses sensors. The underside features the main brush, side brushes, drive wheels, and a dustbin compartment. The rear may have a water tank or exhaust vents.
Diagram Description: Charging Dock
The charging dock is a base station where the robot returns to recharge. It has charging contacts that align with contacts on the robot. It typically connects to a power outlet via the adapter.
Specifications
Model: V-RVCLM21B / V2 Pro
Rated Power: [Specify Power, e.g., 50W]
Battery Capacity: [Specify Capacity, e.g., 3200 mAh]
Charging Time: Approximately [Specify Time, e.g., 3-4 hours]
Working Time: Up to [Specify Time, e.g., 120 minutes]
Dustbin Capacity: [Specify Capacity, e.g., 0.5 L]
Noise Level: < [Specify dB, e.g., 70 dB]
Navigation Type: [Specify, e.g., LDS Laser Navigation]
Adapter Voltage: 100-240V ~ 50/60Hz
Altitude Limit for Adapter: Below 2000m
Getting Started
1. Setup
- Install Side Brushes: Attach the side brushes to the underside of the robot by pressing them into the designated slots until they click.
- Place Charging Dock: Position the charging dock against a wall on a level surface, ensuring adequate clearance around it (e.g., 0.5m on each side, 1.5m in front). Plug in the power adapter and connect it to the dock.
- Charge the Robot: Place the robot onto the charging dock, ensuring the charging contacts align. Allow the robot to charge fully before the first use (approximately 3-4 hours). The indicator light will show charging status.
Operation
Starting and Stopping
To Start: Press the Power Button ⚙️ on the robot or use the mobile app. The robot will begin its cleaning cycle.
To Pause: Press the Power Button ⚙️ again. The robot will pause its operation.
To Resume: Press the Power Button ⚙️ again.
To Return to Dock: Press the Dock/Home Button ? (if available) or use the mobile app. The robot will navigate back to its charging dock.
Cleaning Modes
The robot may offer various cleaning modes, such as Auto Clean, Spot Clean, and Edge Clean. Refer to the mobile app or specific button functions for mode selection.
Mobile App Control
Download the Viomi Home App (or compatible app) to unlock advanced features like scheduling, remote control, map management, and mode selection. Follow the in-app instructions to connect your robot to Wi-Fi.
Maintenance
Regular maintenance ensures the longevity and performance of your robot vacuum.
- Dustbin: Empty the dustbin after each cleaning cycle. Clean the dustbin and filter with a dry cloth or brush.
- Filters: Clean or replace the HEPA filter regularly (e.g., every 1-3 months depending on usage).
- Main Brush: Remove and clean the main brush weekly to remove tangled hair and debris.
- Side Brushes: Clean the side brushes weekly. Replace if damaged or worn.
- Sensors: Wipe the robot's sensors (including cliff sensors and navigation sensors) with a soft, dry cloth periodically.
- Charging Contacts: Ensure charging contacts on both the robot and the dock are clean for optimal charging.
Troubleshooting
Abnormalities and Solutions
| Abnormality | Description | Solution |
|---|---|---|
| Abnormality 1 | Robot cannot start or is not charging. | Ensure the charging dock is plugged in and the robot's charging contacts are clean and aligned. Check the power outlet. |
| Abnormality 2 | Robot gets stuck or cannot navigate properly. | Clear the cleaning path of obstacles. Ensure the robot's sensors are clean. Try a different cleaning mode or location. |
| Abnormality 3 | Intense magnetic field is detected. | Please move the robot to a new position and retry. Avoid operating near strong magnetic sources. |
| Abnormality 4 | Low suction power. | Empty the dustbin, clean or replace the filter, and check the main brush for blockages. |
Contact Information
For further assistance, warranty information, or to purchase accessories, please refer to the official Viomi website or contact authorized service centers.
Official Website: www.viomi.com
