TUFJORD Upholstered Bed Frame
Assembly Instructions
Important Information
- Please read through these instructions carefully before assembly.
- Ensure you have all parts and hardware before starting.
- Assemble on a soft, clean surface (like a carpet) to avoid scratching.
- Do not use power tools unless specifically instructed, as they can damage the product.
- Two people are recommended for assembly.
- Keep small parts away from children.
Parts and Hardware
- Hex key (1x, Part #130445)
- Hex key (1x, Part #111631)
- Bolt (2x, Part #104558)
- Bolt (2x, Part #117001)
- Dowel (4x, Part #101359)
- Screw (16x, Part #112090)
- Screw (4x, Part #192494)
- Screw (8x, Part #101084)
- Screw (4x, Part #117327)
- Washer (4x, Part #100854)
- Screw (8x, Part #105163)
- Bracket (2x, Part #139301)
- Connector piece (1x, Part #10050800)
- Corner bracket (4x, Part #10051931)
- Leg (4x, Part #10054877)
- Metal bracket (8x, Part #150022)
- Side rail bracket (1x, Part #124402)
- Long rail (2x, Part #114290)
- Long rail (2x, Part #114291)
- Short rail (2x, Part #124401)
- Corner piece (8x, Part #10096286)
- Screw (20x, Part #110789)
Assembly Steps
Step 1
Attach the connector piece (1x, #10050800) to the side rail bracket (2x, #10051931) using the hex key (1x, #111631) and screw (2x, #112090).
Visual: A close-up shows the connector piece being fitted onto the side rail bracket and secured with a screw using a hex key.
Step 2
Attach the legs (4x, #10054877) to the corner brackets (4x, #10051931) using screws (8x, #150022).
Visual: Shows four legs being attached to four corner brackets using screws.
Step 3
Insert dowels (4x, #101359) into the pre-drilled holes of a bed slat.
Visual: Shows dowels being inserted into a wooden slat.
Step 4
Attach the first headboard side panel to the main bed frame assembly. Use screw (2x, #112090).
Visual: Two people are shown connecting a headboard side panel to the frame. A magnified view shows a screw being inserted.
Step 5
Attach the second headboard side panel to the main bed frame assembly. Use screw (2x, #112090).
Visual: Similar to Step 4, showing the other headboard side panel being attached.
Step 6
Attach the footboard side panels to the main bed frame assembly. Use screw (4x, #112090).
Visual: Two people are shown connecting the footboard side panels to the frame. A magnified view shows screws being inserted.
Step 7
Secure the main frame structure by attaching the side rail brackets (2x, #10051931) to the frame using screws (20x, #110789).
Visual: Shows screws being inserted into multiple points along the frame to attach the side rail brackets.
Step 8
Attach the curved side pieces (2x) to the bed frame. Use metal brackets (8x, #150022) and screws (8x, #101084).
Visual: Shows curved side pieces being attached to the frame using brackets and screws.
Step 9
Attach the headboard to the main frame. Use screws (2x, #112090).
Visual: Shows the headboard being positioned and attached to the frame. A magnified view shows screws being inserted.
Step 10
Connect the headboard to the side panels. Use screws (2x, #112090).
Visual: Shows the headboard being slid into place and secured to the side panels. A magnified view shows screws being inserted.
Step 11
Continue securing the headboard to the side panels. Use screws (3x).
Visual: Shows further attachment points for the headboard to the side panels.
Step 12
Further secure the headboard to the side panels. Use screws (3x).
Visual: Shows additional securing points for the headboard to the side panels.
Step 13
Attach the central support bracket (1x, #10050800) to the frame. Use hex key (1x, #130445), bolt (2x, #117001), and washer (2x, #100854). Note: Bolt #104558 is not used in this step.
Visual: Shows the central support bracket being attached. A magnified view shows the bolt and washer being used. A crossed-out image indicates bolt #104558 should not be used.
Step 14
Secure the main frame structure using bolts (2x, #104558) and washers (2x, #100854).
Visual: Shows bolts and washers being used to secure parts of the frame.
Step 15
Attach the side rail bracket (1x, #124402) to the long rail (2x, #114290 or #114291).
Visual: Shows a bracket being slid onto the end of a long rail.
Step 16
Attach the long rails (2x, #114290 or #114291) to the frame. Use corner pieces (4x, #10096286) and screws (8x, #105163).
Visual: Shows the long rails being attached to the frame using corner pieces and screws.
Step 17
Secure the main frame structure by attaching the side rail brackets (2x, #10051931) to the frame using screws (16x, #110789).
Visual: Shows screws being inserted into multiple points along the frame to attach the side rail brackets.
Step 18
Attach additional brackets (2x, #139301) to the frame using screws (2x, #110789).
Visual: Shows brackets being attached to the frame with screws.
Step 19
Slide a component into place on the frame.
Visual: Shows a part being slid into a bracket on the frame.
Step 20
Continue sliding components into place on the frame.
Visual: Shows another part being slid into a bracket on the frame.
Step 21
Attach the short rails (2x, #124401) to the frame. Use brackets.
Visual: Shows short rails being attached to the frame using brackets.
Step 22
Secure the short rails (2x, #124401) to the frame using screws (4x, #117327).
Visual: Shows screws being used to fasten the short rails to the frame.
Step 23
Insert the bed slats into the frame. Ensure they are correctly positioned using the indicated brackets (e.g., #105163, #10096286).
Visual: Shows bed slats being placed onto the frame. Close-ups show how to position them and engage with supporting brackets.
