GOOLOO User Manual
TITAN 4000A Jump Starter
Model: GP4000
Thank you for choosing GOOLOO jump starter. To ensure a good user experience, personal safety, and property security, please read all of the instructions carefully before using this product. Please keep this manual for easy reference.
▲ Charge It First !
While reading through the manual, you can begin to charge up your GP4000 with your mobile phone charger and the Type-C cable attached.
Scan to get more information about GOOLOO products at www.gooloo.com
Parts and Functional Description
The GOOLOO GP4000 unit features an Indicator, Power Switch, LED Flashlight, Type-C 15W Input port, USB-A Quick Charge Output port, 15V/10A DC Output port, and a Jumper Cable Socket. The unit is designed for easy and efficient operation.
Operation Instructions
Battery Indicator
Press the power switch to check the battery power:
| Unlit | 1 Solid | 2 Solid | 3 Solid | 4 Solid | |
|---|---|---|---|---|---|
| Battery Power | 0% | 25% | 50% | 75% | 100% |
The indicator will blink one by one during charging. Different numbers of solid indicators show different battery power. All indicators turn off automatically when charging is finished.
How to Charge the GP4000
This unit can be charged with a Type-C cable attached and a 5V wall charger (phone charger) or car charger. (Note: 5V wall charger and car charger are not included)
Only via the QC3.0 wall charger or car charger can quick charge input function be achieved. QC3.0 wall charger and car charger can be purchased separately.
How to Start a Vehicle
Make sure this unit is over 50% charged (check the battery indicator - 2 bars). If this unit has not been used in more than two months, it should be charged first.
- Connect the smart jumper cable fully into this unit and make sure the two indicators on the jumper cable are off.
- Connect the red clamp to the positive (+) battery terminal and the black clamp to the negative (-) battery terminal.
- Check the indicator lights on the jumper cable and operate following the instructions below:
- GREEN LIGHT on and solid: Indicates the connection is correct and the circuit is working. Start the vehicle directly.
- RED LIGHT on and solid with beeping: Indicates the connection is wrong. You need to correct the battery clamps as step 2 mentioned. Then, if GREEN LIGHT is on and solid, start the vehicle directly.
- GREEN LIGHT Blinks: Indicates the vehicle battery voltage is low. Press the “BOOST™” button on the cable. The GREEN LIGHT will be on and solid. Start the vehicle immediately within 30s.
- No Lights on, No beeping: Indicates that the vehicle battery may be damaged. First, ensure correct connection, then press the “BOOST” button on the jumper cable. The GREEN LIGHT will be on and solid. Start the vehicle immediately within 30s.
- Start the vehicle when the GREEN LIGHT is on and solid.
- When the vehicle has been started, remove the jumper cable from the jump starter and vehicle battery.
15V/10A DC Output (12-16.8V, 150W Max)
Cigarette Lighter Socket Output
Connect 12V devices that need to be powered by the cigarette lighter socket (the Cigarette Lighter Socket Adapter is included).
5.5*2.1mm DC Output
You can connect 12V devices that need to be powered by the 12V DC port. Please check if the devices support 12V DC input (the diameter of the DC port is 5.5*2.1mm). If not, you will not be able to use the DC output.
Protection Mode
Short Circuit/Overload Protection: If the 15V/10A DC port is short circuit or overload (load power >150W), this unit will shut off automatically for self-protection. Resolve short circuit or overload problems and recharge this unit to reset from protection mode.
How to Charge Your Phone or Tablet
- Plug the charging cable into the USB-A port and your devices.
- Press the power switch. The unit can identify your device and charge it automatically. The battery indicators will be lit up when charging.
How To Turn On/Off The LED Flashlight
Long press the power switch for 3 seconds to start the LED light. There are 3 modes of LED light: Normal, Strobe, and SOS. Press slightly to cycle through modes and turn off.
Package Content
| # | Part Name | Quantity |
|---|---|---|
| 1 | Host | 1 |
| 2 | EVA Box | 1 |
| 3 | USB-A to Type-C Cable | 1 |
| 4 | Smart Jumper Cable | 1 |
| 5 | Cigarette Lighter Socket Adapter | 1 |
| 6 | User Manual | 1 |
Technical Specification
| Input | Type-C 15W (5V/3A) |
| Output | Type-C 15W (5V/3A), Quick Charge (5V/2.4A, 9V/2A, 12V/1.5A), 5V/2.1A, 15V/10A |
| Capacity | 99.2Wh |
| Starting Current | 800A (3s), 500A (5s) |
| Peak Current | 4000A |
| Size | 228*99.5*38mm |
| Weight | 750g |
| Operating Temp. | -20℃~60℃ / -4℉~140℉ |
| Lifetime | >1000 cycles |
| Full Charging Time | 6-8 Hours (5V/3A) |
Trouble Shooting
| TROUBLE | REASON | REMEDIES |
|---|---|---|
| It has charged for a long time, but the fourth battery indicator is still blinking. | Battery power recognition problem. | Disconnect the charging cable and plug it in again. Try to continue charging for hours. |
| No response when pressing the power switch. | Low voltage protection is started. | Try to charge the unit with a wall charger to activate it. |
| This unit cannot be discharged or battery indicator blinks all the time. | The unit is over-discharged or defective. | Please contact contact@gooloo.com.au. |
| This unit is over-heated or swelled. | The unit is over-discharged or defective. | Please contact contact@gooloo.com.au. |
If there is any other problem with this unit, please contact GOOLOO directly at contact@gooloo.com.au. GOOLOO will do its best to solve the problem within 24 hours.
Toxic and Harmful Substances
Composition and amount of toxic or harmful substance in this product
| Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
|---|---|---|---|---|---|
| 0 | 0 | 0 | 0 | 0 | 0 |
Related Documents
 |
GOOLOO GP4000 TITAN 4000A Series Jump Starter User Manual Comprehensive user manual for the GOOLOO GP4000 TITAN 4000A Series Jump Starter, detailing operation, features, technical specifications, and troubleshooting for safe and effective vehicle starting. |
 |
GOOLOO TITAN 4000A Jump Starter User Manual This user manual provides comprehensive instructions for the GOOLOO TITAN 4000A Series Jump Starter (Model GP4000). It covers product features, operation, charging, vehicle starting, troubleshooting, safety warnings, and warranty information. |
 |
GOOLOO GP4000 TITAN 4000A Series Jump Starter User Manual Comprehensive user manual for the GOOLOO GP4000 TITAN 4000A Series Jump Starter, providing detailed operation instructions, technical specifications, troubleshooting, and safety guidelines for vehicle battery starting and portable power. |
 |
GOOLOO GP4000 Titan 4000A Jump Starter User Manual Comprehensive user manual for the GOOLOO GP4000 Titan 4000A Jump Starter, covering operation instructions, safety precautions, troubleshooting, technical specifications, and warranty information for optimal vehicle starting and device charging. |
 |
GOOLOO GP4000 Jump Starter User Manual Comprehensive user manual for the GOOLOO GP4000 Jump Starter, detailing its features, operation, safety instructions, and troubleshooting. |
 |
GOOLOO TITAN 2000A Series Jump Starter GP2000 User Manual Comprehensive user manual for the GOOLOO TITAN 2000A Series Jump Starter (Model GP2000), detailing operation, safety, troubleshooting, and specifications for jump-starting vehicles and charging devices. |
 |
GOOLOO GP4000 Titan 4000A Jump Starter User Manual Comprehensive user manual for the GOOLOO GP4000 Titan 4000A Jump Starter, including operation instructions, technical specifications, troubleshooting, safety warnings, and warranty information. |
 |
GOOLOO GT4000 4000A Jump Starter User Manual and Safety Guide Comprehensive user manual for the GOOLOO GT4000 4000A URBO series jump starter, covering features, operation, safety precautions, technical specifications, and warranty information. |