Teleco Radio Keypad with Variable Codes

Product Description

The Teleco Radio Keypad is designed for the remote control of electric and electronic equipment, specifically for automatic door opening systems, in compliance with current regulations and standards. It allows for the transmission of commands after entering a 5-digit access code (0-9). Up to 3 independent channels can be activated by pressing the corresponding keys (1, 3, and A) on the keypad after a correct code entry. Key 'B' provides direct transmission without needing an access code, suitable for functions like a doorbell. The 4 radio commands (CH1-CH4) require memorization according to the receiver's instruction manuals.

Available Colors: Black, White

Operation:

• Enter a 5-digit access code.
• If the code is correct, press keys 1, 3, or A to activate channels.
• Key 5 is tactilely marked for easy identification in the dark.
• The keypad allows up to 3 incorrect code attempts before becoming inactive for 30 seconds.
• Each key press is acknowledged by a short beep and LED illumination, with the keypad remaining active for 5 seconds, renewable with each key press.
• A correct code sequence is confirmed by a longer beep after the 5th digit.

Coding System

The keypad is supplied with a default access code: 12345. It is the user's or installer's responsibility to change this code to a personal one.

Inserting a New Access Code

Important: The keypad must have a correct access code activated to function. It is recommended to note down the code for future reference.

1. Enter the secret code (default is 12345 if new).
2. Press the internal 'M1' button; the buzzer will emit three short beeps.
3. Within 5 seconds, enter the new 5-digit code. The buzzer will emit a longer beep after the 5th digit.
4. Repeat the new code within 1 second of the first entry.
5. A continuous 3-second beep confirms successful storage of the new code.

Changing the Battery

• LEDs flashing indicate the battery voltage is below 6V and replacement is needed.
• Keep batteries out of reach of children. Seek medical attention if a battery is swallowed.
• Use only H6F type batteries. Incorrect replacement may pose an explosion hazard.
• Always wrap batteries when storing or disposing to prevent short circuits, fire, or damage.
• Dispose of batteries according to local environmental regulations. Do not dispose of with household waste.

Guarantee

The guarantee complies with legal provisions and is valid in the country of purchase. Batteries are excluded from the guarantee. Refer to the specialized retailer for warranty claims.

Declaration of Conformity to EU Directives

Teleco Automation s.r.l. declares that this radio equipment complies with Directive 2014/53/EU. The full text of the EU compliance declaration is available at: www.telecoautomation.com/ce.

Technical Specifications

Carrier Frequency: 868.3 MHz

ERP: 0 dBm

Power Supply: 9V ± 10% (H6F alkaline battery)

Consumption (Transmitting): 10 mA

Working Temperature: -10°C to +55°C

Protection Rating: IP54

The manufacturer reserves the right to make changes to technical data and features without prior notice as part of continuous product development.