EVERBILT^TM

INSTALLATION GUIDE

SOFT CLOSE DRAWER SLIDES
FOR ALL CABINETS

Product Overview: The image displays the components of the Everbilt Soft Close Drawer Slides. It shows two main slide assemblies: one designed for the cabinet side and one for the drawer side. These are long, multi-section metal rails with integrated ball bearings for smooth operation. Also visible are smaller components like the Face Frame Adapter, various screws, and the soft-close damper mechanism, which is a rectangular block that attaches to the slide.

Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service.

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-800-305-1726

HOMEDEPOT.COM

THANK YOU
Everbilt appreciates the trust and confidence placed in them through the purchase of this product. Everbilt strives to continually create quality products designed to enhance your home. Customers are encouraged to visit Everbilt online to see their full line of products available for home improvement needs. Thank you for choosing Everbilt!

Safety Information
Warranty
Pre-Installation
Installation Options
Tools Required
Package Contents
Planning Installation
Face Frame Installation
Frameless Installation

Safety Information

Please read and understand this manual before installing this product.

⚠ CAUTION: Always be cautious when using power tools.

Warranty

Subject to the terms of this warranty, the Manufacturer warrants to the original consumer purchaser that the product will be free from defects in material and workmanship. If the product does not comply with this warranty, the Manufacturer will repair or replace the product or, at the Manufacturer's option, refund the purchase price. Repair, replacement, or refund of the original purchase price is your sole remedy under this or any other warranty on the product, whether expressed or implied.

For additional details and questions, please contact Everbilt Customer Service at 1-800-305-1726.

Installation Options

WHICH CABINET DO I HAVE?
Please note the following points:
- These slides can be installed in Face Frame and Frameless cabinets.
- Drawer side clearance must be 1/2 inch on either side of the drawer box. (See Page 5 diagram for more information.)
Face Frame Cabinet Diagram: This diagram shows a cross-sectional view of a cabinet with a face frame. The face frame is a solid wood frame attached to the front of the cabinet box. If your cabinet has this visible frame around the opening, it is a face frame cabinet. If you have Face Frame cabinets, please follow all Face Frame instructions in this manual.
Frameless Cabinet Diagram: This diagram shows a cross-sectional view of a cabinet without a face frame. In a frameless cabinet, the cabinet box edges are flush with the opening, providing full access to the cabinet interior. If your cabinet does not have a visible frame around the opening, it is a frameless cabinet. If you have Frameless cabinets, please follow all Frameless instructions in this manual.

TOOLS REQUIRED

➕ Phillips Head #2 Screwdriver: Used for driving screws.
✏️ Pencil or Scribe: For marking measurements and lines.
? Ruler (in. and mm): For accurate measurements.
⚖️ Level: To ensure components are perfectly horizontal.

Pre-Installation

PACKAGE CONTENTS

Package Contents Diagram: This diagram illustrates all the components included in the package. It shows two long drawer slide assemblies (one left, one right), two cabinet side slide assemblies (one left, one right), two Face Frame Adapters, and various screws of different sizes. The components are labeled A through F, corresponding to the table below.

Part	Description	Quantity
A	Face Frame Adapter	2
B	3.5 x 12 Counter Sunk Screw for Adapter	4
C	Cabinet Side Slide Left	1
D	Cabinet Side Slide Right	1
E	Drawer Side Slide Left & Right	2
F	3.5 x 16 Counter Sunk Screw for Slides	12

PLANNING INSTALLATION

When you are finished installing your new Soft Close Roller Runner - the inside of your cabinet will look like:

Face Frame Cabinet Drawer Planning Diagram: This cross-sectional diagram shows how the Soft Close Roller Runner will appear inside a face frame cabinet. It illustrates the drawer, the cabinet structure, the Face Frame Adapter, and the Face Frame Socket. It highlights that there should be 1/2 inch (13 mm) clearance on either side of the drawer from the edge to the edge of the cabinet opening. The formula for drawer width is given as X = Y - 1 in., where X is the width of the drawer from edge to edge, and Y is the width of the drawer Face Frame opening.

Frameless Cabinet Drawer Planning Diagram: This cross-sectional diagram shows how the Soft Close Roller Runner will appear inside a frameless cabinet. It illustrates the drawer and the cabinet structure. Similar to the face frame diagram, it indicates a 1/2 inch (13 mm) clearance on either side of the drawer from the edge to the edge of the cabinet opening. The formula for drawer width is given as X = Y - 1 in., where X is the width of the drawer from edge to edge, and Y is the width of the drawer opening within the Frameless Cabinet.

Installation for Face Frame

PLEASE NOTE: Face Frame Cabinets require a Rear Panel Bracket - SOLD SEPARATELY! SKU 1002772986

Attach Face Frame Adapter: Attach the Face Frame Adapter (A) to the Cabinet Side Slide Right (D) and Left (C) with two screws (B) each. DO NOT use an electric drill to attach. The diagram shows the adapter (A) being screwed onto the end of the cabinet side slide (C or D) using two screws (B).
Pull Soft Close Damper Forward: Pull the Soft Close Damper forward (as shown in the diagram). Use a fingernail or a flat head screwdriver to lock the Damper in the "out" position. The diagram shows a close-up of the damper mechanism, with an arrow indicating to pull it forward until it clicks into place.
Place Cabinet Side Slide into Rear Panel Bracket: Place each Cabinet Side Slide into the Rear Panel Bracket. The diagram shows the end of the cabinet side slide being inserted into the bracket.
Ensure Cabinet Side Slides are Level: Ensure each Cabinet Side Slide is level and attach with two screws (F) to the Face Frame Cabinet. The diagram shows the cabinet side slide being screwed into the cabinet side panel, with a small gap of 1/16 inch (2 mm) between the slide and the face frame. The slide is positioned 3/4 inch (19 mm) from the bottom of the face frame.
Secure Cabinet Slides: Ensure each Cabinet Slide is level and parallel to each other. Secure the bracket to the back of the cabinet with 2 screws provided in SKU 1002772986. The diagrams show two views: 4a illustrates the slide attached to the cabinet side, and 4b shows the rear panel bracket secured to the back of the cabinet.
Install Drawer Slides: Install Drawer Slides (E) on the bottom side of the drawer using six screws (F) (Three on each side). The diagram shows the drawer upside down, with the drawer slide being screwed into its bottom surface.
Install Drawer into Cabinet: To install the drawer into the cabinet, place the rollers of the drawer slide into the cabinet slide. Push the drawer in until the Soft Close Damper catches and pulls the drawer closed. The diagram shows the drawer being pushed into the cabinet, with the slides engaging.
Check Drawer Alignment: Once the drawer is installed, check its alignment to ensure the soft close damper is engaging properly. If necessary, remove the drawer and adjust the rear panel brackets as needed. Once the final placement is achieved, remove the drawer one last time and secure the rear panel brackets with remaining screws from SKU 1002772986. The diagram shows the drawer fully installed and aligned within the cabinet.

Installation for Frameless

Install Drawer Slides: Begin by installing Drawer Slides on the bottom side of the drawer using 6 screws. The diagram shows the drawer upside down, with the drawer slide being screwed into its bottom surface.
Figure Out Slide Fit: Next, figure out where the slide should fit into the cabinet. The diagram shows the drawer partially inserted into the cabinet, with a measurement 'X' being marked from the bottom of the drawer front.
Secure Front of Slide: Next, secure the front of the slide to the cabinet. The diagram shows the cabinet side slide being screwed into the cabinet side panel, with a small gap of 1/16 inch (2 mm) between the slide and the cabinet side panel.
Line Up Slides and Attach: Line up the slides to your marks in the cabinet and ensure the Cabinet Side Slide Left and Cabinet Side Slide Right are level. Then attach with 3 screws to each side. The diagram shows the cabinet side slides being aligned and screwed into the cabinet interior.
Install Drawer into Cabinet: To install the drawer into the cabinet, place the rollers of the drawer into the cabinet slide and push the drawer in until the Soft Close Damper catches and pulls the drawer closed. The diagram shows the drawer being pushed into the cabinet, with the slides engaging.

Marking for Frameless Installation: Mark "X" from the front bottom mark. Align the top of the Cabinet Side Slide with this mark. The diagram shows a close-up of the drawer side slide and cabinet side slide, indicating the measurement 'X' from the top of the drawer slide to the bottom of the drawer front, and confirming the soft close damper is pulled forward and locked into place.

	Everbilt 15 Inch Undermount Runner Installation Instructions Step-by-step guide for installing the Everbilt 15 Inch Undermount Runner drawer slides in both face frame and frameless cabinetry. Includes parts list, tools required, dimensions, and installation procedures.
	Everbilt Soft Close Frameless Inset 110° Hinge Installation Guide Detailed installation guide for the Everbilt Soft Close Frameless Inset 110° Hinge (Model # 9235951). Learn how to pre-drill, install hinges, mount plates, and adjust doors for your cabinet projects.
	Everbilt Soft Close Frameless Inset 110° Hinge Installation Guide Step-by-step installation guide for the Everbilt Soft Close Frameless Inset 110° Hinge (Model # 9235951). Includes pre-installation, tools required, package contents, and adjustment instructions.
	Everbilt European Hinge for Frameless Furniture: Use and Care Guide Comprehensive use and care guide for the Everbilt European Hinge for Frameless Furniture, featuring full overlay door mounting. Includes installation instructions, safety information, warranty details, and adjustment procedures.
	Everbilt Heavy Duty Magnetic Catch Installation Guide and Care Comprehensive guide for installing and using the Everbilt Heavy Duty Magnetic Catch. Includes package contents, tools required, step-by-step installation instructions, and warranty information.
	Everbilt 46 Inch Single Upright Installation and Care Guide Comprehensive guide for installing and caring for the Everbilt 46 Inch Single Upright shelving system, including safety information, tools required, and step-by-step instructions.
	Everbilt 14 Inch Super Duty Shelving Installation and Care Guide Detailed instructions and care guide for the Everbilt 14 Inch Super Duty shelving system, including installation hardware, tools required, and step-by-step assembly instructions.
	Everbilt 24 in. x 16 in. Drawer Kit Use and Care Guide This guide provides instructions for the use, care, and installation of the Everbilt 24 in. x 16 in. drawer kit, available in white, gray, and birch.