COSTWAY SP35778 Golf Push Cart User Manual

Introduction

With your inspiring rating, COSTWAY aims to provide an EASY SHOPPING EXPERIENCE, GOOD PRODUCTS, and EFFICIENT SERVICE. This user manual contains important safety information. Please read and keep for future reference.

Contact Information:

• US office: Fontana
• UK office: Ipswich
• DE office: FDS GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Deutschland
• FR office: Saint Vigor d'Ymonville
• PL office: Gdańsk

Part List

• A Foam Handle
• B Scorecard Holder
• C Handle Tube
• D Adjustable Handle Mechanism
• E Upper Bracket
• F Upper Frame Set
• G Left Wheel Lock Mechanism
• G1 Right Wheel Lock Mechanism
• H Rear Wheel Set
• I Lower Frame Set
• J Lower Bracket Set
• K Front Wheel Set
• L Umbrella Holder Base
• M Storage Net
• N Umbrella Holder

Maintenance

To clean, wipe the cart with a soft, dry cloth. Car polish may be used to maintain the finish. Lubricate moving parts every 6 months.

Warnings

For your safety, please read and understand these warnings and keep this user guide for future reference.

• Always ensure the cart is fully extended and locked before use.
• Always ensure the cart is folded and locked properly before lifting or transporting.
• Do not run while using this product.
• Do not use accessories other than those designed for use with your carts.
• Keep all packing materials away from children and recycle where possible or as required by law.
• Keep hands and fingers away from moving or sliding parts!

Assembly Instructions

Step 1: Front Wheel Assembly

Install the front wheel set into the lower frame using the [M6*40mm screw] and nut. (Refer to Fig. 1)

Diagram Description (Fig. 1): A close-up view shows the front wheel assembly being attached to the lower frame with a screw and nut labeled "M6*40mm screw".

Step 2: Rear Wheel Assembly

Install and insert the rear wheel sets into the wheel holes. Then, press the [button] downwards as shown in Fig. 2.

Diagram Description (Fig. 2): Illustrates the rear wheel sets being inserted into their respective holes. An arrow indicates pressing a [button] located on the wheel mechanism downwards.

Step 3: Frame Locking

Unfold the upper frame and the handle tube, then lock the red [buckle] to secure the structure as shown in Fig. 3.

Diagram Description (Fig. 3): Shows the upper frame being unfolded. A red [buckle] is highlighted, indicating it should be locked to secure the frame.

Using the Cart

Brake Operation

Push down the red [brake pedal] to stop the rear wheel. Raise the pedal up to release the rear wheel. (Refer to Fig. 4)

Diagram Description (Fig. 4): Depicts the red [brake pedal]. An arrow shows it being pushed down to engage the brake on the rear wheel, and another arrow shows it being lifted to disengage.

Umbrella Holder Attachment

To attach the [umbrella holder], simply connect it onto the cart as shown in Fig. 5.

Diagram Description (Fig. 5): Shows the [umbrella holder] being easily attached to a designated mounting point on the cart.

Folding the Cart

To fold the cart, press the red [button] to release the front wheel. Then, fold the cart until the pin is inserted into the [hole]. (Refer to Fig. 6 and Fig. 7)

Diagram Description (Fig. 6 & 7): Illustrates pressing a red [button] to unlock the front wheel. The cart is then shown being folded, with a pin mechanism aligning with a [hole] to secure the folded state.

Unfolding and Securing

To unfold, release the red [buckle], then fold the upper frame and the handle. (Refer to Fig. 8)

Diagram Description (Fig. 8): Shows the process of releasing a red [buckle], followed by folding the upper frame and handle to prepare for storage or transport.

Front Wheel Adjustment Mechanism

If you find that the cart veers to the left or right during use, follow these instructions to correct the problem.

Step 1: Initial Check

Observe the cart's direction of travel. (Refer to Fig. 1)

Diagram Description (Fig. 1 - Wheel Adjustment): A front view of the cart's front wheel assembly, with labels "Left" and "Right" indicating the sides. Curved arrows suggest potential misalignment.

Step 2: Adjusting for Veer Left

If the cart veers to the left, face the front wheel. Use the provided Allen wrench to screw the right bolt counterclockwise or the left bolt clockwise until the front wheel is centered between the front fork. (Refer to Fig. 2)

Diagram Description (Fig. 2 - Wheel Adjustment): A front view of the front wheel. An Allen wrench is shown interacting with bolts on either side. Curved arrows indicate the direction of bolt rotation (counterclockwise for the right bolt, clockwise for the left bolt) to center the wheel.

Step 3: Adjusting for Veer Right

If the cart veers to the right, face the front wheel. Use the provided Allen wrench to screw the left bolt counterclockwise or the right bolt clockwise until the front wheel is centered between the front fork. (Refer to Fig. 3)

Diagram Description (Fig. 3 - Wheel Adjustment): A front view of the front wheel, similar to Fig. 2. An Allen wrench is shown interacting with bolts. Curved arrows indicate the direction of bolt rotation (counterclockwise for the left bolt, clockwise for the right bolt) to center the wheel.