COSTWAY SP37604 Golf Push Cart User Manual
Thank you for your purchase. With your inspiring feedback, COSTWAY aims to provide an easy shopping experience, good products, and efficient service.
This user manual contains important safety information. Please read and keep for future reference.
Parts List
Diagram showing the various parts of the golf push cart with labels A through X.
- A
- Hand grip
- B
- Scorecard holder
- C
- Handle tube
- D
- Adjustable handle mechanism
- E
- Upper bag holder bracket
- F
- Main upper frame tube
- G
- Leg bracket
- H
- 2 holes leg frame
- I
- 4 holes leg frame
- J
- Right weight stabilizer
- J1
- Left weight stabilizer
- K
- Slippery connecting rods
- L
- Right wheel locking mechanism
- L1
- Left wheel locking mechanism
- M
- Anti-splay wire
- N
- Lower frame mechanism
- O
- Rear wheel
- P
- Lower frame
- Q
- Front fork
- R
- Front wheel locking mechanism
- S
- Lower bag holder bracket
- T
- Front wheel
- U
- Umbrella holder storage rack
- V
- Umbrella holder base
- W
- Umbrella holder
- X
- Basket
Maintenance
To clean the cart, wipe with a soft, dry cloth. Car polish may be used to maintain finish. Lubricate moving parts every 6 months.
⚠️ Warning:
Keep this user guide for future reference. Always make sure the cart is fully extended and locked before use. Always make sure the cart is folded and locked properly before lifting or transporting. Do not run while using this product. Do not use accessories other than those designed for use with this cart. Keep all packing materials away from children and recycle where possible or where required by law.
Handle Joint Mechanism
Figure A shows a close-up of the handle joint mechanism with a nut that can be adjusted with a wrench.
The customer can adjust the nut on the handle joint mechanism with a [wrench] tool when they find the handle joint is too loose, as shown in Figure A.
Front Wheel Adjustment
Figure B shows the front wheel with a button that can be pressed to adjust its position.
Press the [button] to pull out the wheel on two sides, so it can suit different bag sizes, as shown in Figure B.
Unfolding Steps
- Open the top bracket as shown in Figure 1.
Figure 1 illustrates opening the top bracket.
- Release the [buckle] for the lower frame and handle joint mechanism as shown in Figure 2.
Figure 2 shows releasing the buckles on the lower frame and handle joint mechanism.
- Unfold the handle and lower frame. They will click into place. Secure the [buckle] on the handle and lower frame as shown in Figures 3 & 4.
Figures 3 and 4 demonstrate unfolding the handle and lower frame, locking them, and securing the buckles.
- Unfold the bottom bracket as shown in Figure 5.
Figure 5 illustrates unfolding the bottom bracket.
- Assemble the rear wheel as shown in Figure 6.
Figure 6 shows the assembly of the rear wheel.
Folding Steps
- Fold the lower bracket as shown in Figure 7.
Figure 7 illustrates folding the lower bracket.
- Release the [buckle] for the handle joint and lower bracket as shown in Figure 8.
Figure 8 shows releasing the buckles on the handle joint and lower bracket.
- Fold the handle and push the frame forward as shown in Figure 9, so the handle can fold in the middle of the rear wheel.
Figure 9 demonstrates folding the handle and pushing the frame forward.
- Secure the [buckle] as shown in Figure 10.
Figure 10 shows securing the buckle.
- Fold the top bracket as shown in Figure 11 and finish folding the trolley.
Figure 11 illustrates folding the top bracket to complete the folding process.
Umbrella Holder
Figure 12 shows how to attach the umbrella holder to the cart.
To use: Simply attach the [umbrella holder] onto the cart as in Figure 12.
Figure 13 shows how to store the umbrella holder on the handle's storage rack.
To store: Attach the [umbrella holder] to the [storage rack] on the handle as in Figure 13.
Foot Brake Mechanism
Figure 14 shows the foot brake pedal on the rear wheel assembly.
Push on the [brake pedal] to stop the rear wheel and pull off to release, as shown in Figure 14.
Front Wheel Alignment
Diagram showing the front wheel alignment adjustment screws (A and B) and the required allen wrench.
Use the [allen wrench] to adjust screws [screw A] and [screw B] for proper alignment.
- If the cart veers to the left: Turn [screw A] [counter-clockwise ↩️] and [screw B] [clockwise ↪️].
- If the cart veers to the right: Turn [screw A] [clockwise ↪️] and [screw B] [counter-clockwise ↩️].
