ASSEMBLY INSTRUCTION
General Advice
It would be best if you set aside and organize all pieces and corresponding "nuts/bolts" first. Please follow the instructions to assemble the items correctly.
Assembly can be done by one person, but two people are recommended. Please ensure the safety of the glass when assembling. Do not overtighten or undertighten screws. As shown in the figure, insert the screw into the hole. The arrow in the picture indicates the direction; then rotate 90° or 180° clockwise. The remaining parts are spare parts.
Safety Information
- The accessory bag contains some small accessories, which should be kept away from children.
- Kids are not allowed to climb or play with the product for safety reasons.
Parts and Hardware
The following parts and hardware are included in the package:
| Part Label | Quantity | Description/Dimensions |
|---|---|---|
| A | 28 | 3.5x12mm screws |
| B | 28 | Cam lock studs |
| C | 14 | Cam locks |
| D | 1 | Drawer slide (outer part, D1) |
| E | 20 | Drawer slide (inner part, D2) |
| F | 20 | Screws |
| G | 8 | Screws |
| H | 1 | Handle/Knob |
| I | 4 | Screws |
Cam Lock Fastening System: This system will be used throughout the assembly process.
Assembly Steps
STEP 1
Attach two side panels (labeled 1 and 2) to a base panel (labeled 1). Use four units of part A (3.5x12mm screws) and four units of part B (cam lock studs) to connect these panels. The diagram shows arrows indicating where screws and studs are inserted.
STEP 2
Insert cam locks (C) into the designated holes on panels 1 and 2. Insert cam lock studs (B) into the corresponding holes on the connecting panel. Secure the panels by turning the cam locks clockwise. The diagram shows the cam lock system components and their assembly.
STEP 3
Attach panel 5 and panel 6 to panel 4. Use four units of part A (screws) and four units of part B (cam lock studs). Arrows indicate the insertion points for screws and studs.
STEP 4
Attach panel 7 and panel 9 to panel 6. Use four units of part B (cam lock studs) and four units of part A (screws). Attach panel 8 to the assembly. Arrows indicate insertion points.
STEP 5
Warm Reminder: Before installing the drawer rail, you need to separate the D1 and D2 first. The diagram illustrates separating the two parts of the drawer slide mechanism.
STEP 6
Attach the separated drawer slide components (D1 and D2) to the assembled side panels. Use two units of D1 and two units of D2, securing them with four units of part C (cam locks) and eight units of part D1 (screws). Arrows indicate the direction of attachment.
STEP 7
Attach drawer slide components (F and E) to panel 6 and panel 5. Use four units of part F (screws) and four units of part E (screws). Arrows indicate insertion points.
STEP 8
Attach the base panels (labeled 1, 2, and 3) to the main structure. Use four units of part G (screws) and four units of part B (cam lock studs). Arrows indicate insertion points.
STEP 9
Insert the drawer side panels (labeled 11 and 12) into the main assembly. Use four units of part F (screws) and four units of part E (screws) to secure them. Arrows indicate insertion points.
STEP 10
Attach the drawer front panel (labeled 13) to the drawer box structure. Use four units of part F (screws) and four units of part E (screws). Arrows indicate insertion points.
STEP 11
Attach the top panel (labeled 14) to the main structure. Use four units of part A (screws), four units of part B (cam lock studs), four units of part E (screws), four units of part F (screws), and four units of part G (screws). Arrows indicate insertion points.
STEP 12
Attach the back panel (labeled 4) to the drawer box. Use four units of part C (cam locks) and four units of part I (screws). Arrows indicate insertion points.
STEP 13
Attach the drawer bottom panel (labeled 18) to the drawer sides (labeled 15, 16, 17). Use four units of part E (screws) and four units of part F (screws). Arrows indicate insertion points.
STEP 14
Attach the drawer front panel (labeled 19) to the assembled drawer box. Use four units of part F (screws) and four units of part E (screws). Arrows indicate insertion points.
STEP 15
Attach the drawer slide components (D2) to the drawer box. Use two units of D2 and four units of part C (cam locks). Arrows indicate insertion points.
STEP 16
Insert the assembled drawer into the main unit. The diagram shows the drawer sliding into place.
STEP 17
Attach the handle/knob (H) to the drawer front. Use one unit of part C (screw) and one unit of part H (handle). Arrows indicate insertion points.
STEP 18
The final assembly is complete. The diagram shows the finished nightstand.
