Product Identification
Brand: Carlon®
Product Type: MOTION SENSING TRANSMITTER
Model: HS2144T
FCC ID: DE4-HS2144T
Industry Canada (IC) ID: 2998A-HS2144T
Manufacturer: LAMSON & SESSIONS
Location: CLEVELAND, OHIO 44122
Origin: MADE IN CHINA
Device Labeling and Compliance Statements
The device label includes the following critical information:
- This device complies with part 15 of the FCC Rules and with RSS-210 of Industry Canada.
- Operation is subject to the following two conditions:
- (1) this device must not cause harmful interference, and
- (2) this device must accept any interference received, including interference that may cause undesired operation.
- Warning: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment.
- The term "IC:" before the radio certification number signifies that Industry Canada technical specifications were met.
Regulatory Inquiries Regarding User Manuals
Correspondence with regulatory bodies clarifies requirements for user manuals for devices like the Carlon HS2144T.
Industry Canada Guidance
Industry Canada confirmed that a device can be sold without a separate user's manual if all required labeling information, including statements mandated by RSS-GEN section 5.2 and section 7.1.5, are present directly on the device. This guidance was communicated by Nicolas DesMarais, Certification Officer, Industry Canada. Further information can be found at Industry Canada Certification Portal.
FCC Guidance
The FCC also confirmed that if a device's label clearly demonstrates all information required for compliance (FCC ID, RF hazard warnings, interference statements), then a separate user manual exhibit is not required for certification. The product label can serve as the user manual exhibit.
Summary of Compliance
For the Carlon HS2144T Motion Sensing Transmitter, compliance with FCC and Industry Canada regulations allows for the omission of a separate user manual, provided the device's label contains all necessary identification, operational, and warning statements. This on-device labeling fulfills the compliance information typically found in a user manual.
