Mechanical Entry Chime DH994

Congratulations on a wise purchase!

ENCLOSED YOU WILL FIND:

*This product is for indoor use only.

TOOLS NEEDED:

INSTALLATION

The entry chime can be used on doors that open in or open out and can be used with wood or metal door frames. For best results, install 2" from where door opens (Figure 1).

FIGURE 1: Installation position relative to door opening.

Diagram shows the Entry Chime, Metal Disc, and Header, with an indication of 2" spacing from the door opening.

Entrance Door that Opens In

  1. Position mounting plate on the inside of door so that the top of plate is aligned with the top of door. Mark screw locations.
  2. Using the nuts and screws provided, secure the chime to the mounting plate (Figure 2).
FIGURE 2: Securing the chime to the mounting plate.

Diagram shows the Chime Assembly, Mounting Plate, #10 Nut, #10 x 1/2" Screws, and Mounting Slot.

Entrance Door that Opens Out

  1. Position chime on door stop with chime magnet facing door.
  2. With magnet touching door, mark mounting slots on door stop.
  3. At the marks, drill #28 (.136″ dia.) pilot holes.
  4. Mount chime to door stop with #10 x 1-1/4" long sheet metal screws (Figure 4). Note: If door is not metal, proceed to steps 5 & 6.
  5. Mark where chime magnet hits door.
  6. Using the #10 x 3/4″ long flat head screw, mount metal disk to the wood door frame at marked location.
FIGURE 3: Mounting the metal disc for doors opening out.

Diagram shows #10 x 3/4" Long Flat Head Screw, Metal Disc, Wood Header, Mounting Plate, Door, Door Stop, and Door Opens In.

FIGURE 4: Mounting the chime to the door stop.

Diagram shows Header, Door Stop, Mounting Slot, Metal Disc, Wood Door, #10 x 1-1/4" Long Sheet Metal Screws, #10 x 3/4" Long Flat Head Screw, and Door Opens Out. A note indicates that the mounting plate is not used for this type of installation.

Installations with a Door Stop Strip that Interferes with the Magnet

Use spacer and #10 x 1-1/4″ long screws to mount the mechanical chime to the door frame. Drill a pilot hole for the sheet metal screw using a #28 (.136″ dia.) drill.

FIGURE 5: Installation with a door stop strip.

Diagram shows Spacer (optional), Mounting Slot, #10 x 1-1/4" Long Sheet Metal Screws (2), Door Frame, Door Strip and Gasket Seal, Steel Door, and Door Opens Out. Screws go through spacer and into door frame.

OPERATION

Carlon's entry chime operates magnetically. As the door opens, the chime magnet pulls away from the door frame or metal disc causing the magnet to hit the chime bar which makes a sound. To deactivate sound, slide muting bar under magnet.

Sound Deactivated (Slide Left)

Sound Activated (Slide Right)

Muting Bar

LIMITED WARRANTY

The product you have purchased is guaranteed against defects in workmanship and materials for the period stated on the package. Warranties implied by law are subject to the same time period limitation. Some states do not allow limitations on how long an implied warranty lasts, so this time limitation may not apply to you.

If the product fails due to a manufacturing defect during normal use, return the product and dated sales receipt to the store where purchased for replacement OR send the product and the dated sales receipt to:

Lamson & Sessions
Attn: LHP Customer Service
25701 Science Park Drive
Cleveland, OH 44122 USA

Not Covered - Batteries, light bulbs, and other expendable items are not covered by this warranty. Repair service, adjustment and calibration due to misuse, abuse or negligence are not covered by this warranty. Unauthorized service or modification of the product or of any furnished components will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, set-up time, loss of use, postage, unauthorized service, or other products used in conjunction with, but are not supplied by, Lamson & Sessions.

All requests for replacement must include a dated sales receipt (copies accepted). LAMSON & SESSIONS IS NOT LIABLE FOR LOST PROFITS, INDIRECT, SPECIAL, EXEMPLARY, INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING WITHOUT LIMITATION ANY SUCH DAMAGES DUE TO IMPROPER WIRING OR MISUSE OF THE PRODUCT. As some states do not allow the exclusion or limitation of incidental or consequential damages, the above limitation and exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

ALSO AVAILABLE FROM CARLON:

Models: DH994IM7.06_F, DH994 Mechanical Entry Alert Door Chime, DH994, Mechanical Entry Alert Door Chime, Entry Alert Door Chime, Alert Door Chime, Door Chime

File Info : application/pdf, 2 Pages, 72.66KB

PDF preview unavailable. Download the PDF instead.

dh994-installation-manaul

References

GPL Ghostscript 9.50 QuarkXPress(R) 7.01

Related Documents

Preview Carlon DH992 Non-Electric Mechanical Door Chime Installation Guide
Detailed installation instructions and limited warranty information for the Carlon DH992 Non-Electric Mechanical Door Chime with Viewer. Learn how to install and troubleshoot your door chime.
Preview Carlon RC4120 Long Range Wireless Door Chime Installation and Operation Guide
This guide provides detailed instructions for installing, operating, and troubleshooting the Carlon RC4120 Long Range Wireless Door Chime. Learn how to set up the chime receiver and button, change melodies, and resolve common issues.
Preview Carlon HW2190 Heavy Duty Remote Control Instruction Guide
Instruction guide for the Carlon HW2190 Heavy Duty Remote Control, covering installation, operation, troubleshooting, specifications, and warranty information.
Preview Carlon Wireless Door Chime Installation Guide (RC3304F, RC3306F)
Comprehensive installation and operation guide for Carlon wireless door chimes, models RC3304F (White) and RC3306F (Oak). Includes setup instructions, battery replacement, troubleshooting, and warranty information.
Preview Carlon HS2144T Motion Sensing Transmitter: FCC & Industry Canada Compliance on Device Labeling
Details on FCC and Industry Canada regulations concerning user manuals for the Carlon HS2144T Motion Sensing Transmitter, emphasizing the acceptance of on-device labeling for compliance.
Preview Carlon A410 1G 4"SQ NM CVR 1/2rise Blue Box Cover - Elliott Electric Supply
Product details for the Carlon A410 1G 4"SQ NM CVR 1/2rise blue box cover from Abb Installation Products, Inc. Includes catalog number, manufacturer information, specifications, packaging, and certifications.