MTD 53B 22" Rotary Mower
Grass Catcher Model GC-12
Parts Diagram and List
This document provides an exploded view diagram and a detailed parts list for the MTD 53B 22-inch Rotary Mower with Grass Catcher Model GC-12. The diagram illustrates the assembly of various components, with each part identified by an index number that corresponds to its entry in the parts list.
Diagram Description:
The diagram shows a 22-inch rotary mower in an exploded view. Key components include the engine (labeled with numbers like 39, 24, 32, 34), the main mower deck (labeled 2), the blade (labeled 3), wheels (labeled 4, 29), the handle assembly (including upper handle 7, lower handle 8, handle brackets 13, 14, and height adjustment mechanisms 9, 11), the grass catcher, and various fasteners like bolts, screws, washers, and nuts. A "DANGER" decal is visible on the mower deck. The diagram uses numbered callouts to reference specific parts in the accompanying list.
Parts List:
Index No. | Part No. | Description |
---|---|---|
1 | 028266 | Chute Deflector Assembly |
2 | 028415 | Deck - 22" |
3 | 030429 | Blade - 22" - Offset |
4 | 041111 | Wheel - 8" |
5 | 050500 | Control Cable - Engine/Blade* |
6 | 050542 | Control - Throttle |
7 | 071050 | Handle - Lower |
8 | 071142 | Handle - Upper |
9 | 090589 | Back Plate - Height Adjuster |
10 | 090613 | Setting Lever - Height Adjuster |
11 | 090712 | Wheel Lever - Height Adjuster |
12 | 104661 | Handle Bracket - Right Hand |
13 | 104679 | Handle Bracket - Left Hand |
14 | 104745 | Control - Engine/Blade Crossbar* |
15 | 105767 | Trailing Shield Mounting Bracket* |
16 | 105791 | Baffle - Rear Only* |
17 | 106005 | Blade Washer - 3" |
18 | 110064 | Bolt Cap |
19 | 110379 | Cable Tie |
20 | 111252 | Trailing Shield - Plastic* |
21 | 111260 | Plastic Tip - Height Adjuster |
22 | 133140 | Blade Adaptor |
23 | 144063 | Decal - C.P.S.C. - Danger |
24 | 144204 | Decal - Blade Warning |
25 | 144899 | Decal - Starting Instructions |
26 | 145425 | Decal - Danger Install Chute Deflector |
27 | 150011 | Bolt Carriage %-20x% Gr 5 |
28 | 150045 | Bolt - Hex HD 5/16x18x14 |
29 | 150060 | Shoulder Bolt - Wheel |
30 | 150201 | Washer - Curved 5/16 |
31 | 150276 | Woodruff Key No. 6 |
32 | 150318 | Cable Clamp |
33 | 150433 | Bolt - Hex HD 4-20x2 |
34 | 150623 | Screw - Hex HD Sht Metal 10x% |
35 | 150946 | Locknut - 10-24 Hex Washer HD |
36 | 151613 | Bolt - Hex HD Sems 10-32x |
37 | 151795 | Wing Nut 5/16-18 |
38 | 151936 | Bolt - Curved HD Crg 5/16-18x2% |
39 | 152074 | Rope Stop |
40 | 152207 | Locknut - 4-20 Acorn |
41 | 152215 | Rope Guide |
42 | 152405 | Bolt Carriage %-16x4 |
43 | 152421 | Washer - Spring - Height Adjuster |
44 | 152587 | Shoulder Bolt - Height Adjuster |
45 | 151613 | Locknut - 5/16-18 Nylock |
46 | 450288 | Bolt - Blade %-24x1 Gr 5 |
47 | 461475 | Lockwasher - Extra Duty |
48 | 525337 | Bolt - Hex Head 10-24x½ |
49 | 714170 | Decal - Rating Plate |
50 | 715011 | Hitch Pin No. 3 |
51 | 715037 | Locknut - 4-20 Keps |
52 | 715078 | Locknut - 4-20 Flanged Whiz |
53 | 715086 | Locknut - 4-16 Top |
54 | 715409 | Washer - Spring - Wheel |
55 | 715417 | Washer - SAE |
56 | 715508 | Locknut - 4-20 Top |
NOTE: Parts are right or left hand as viewed from operator position. Approximate cutting heights 1%" to 3%". Specifications subject to change without prior notice.
PN 194613