20"/22" Rotary Mower
Model Numbers:
- 20-2001D
- 20-2021D
- 20-2201D
- 20-2221D
Grass Catcher: 30-0215 (Not Shown)
Diagram
An exploded view diagram illustrates the assembly of the MTD 20"/22" Rotary Mower. The diagram shows the main components including the mower deck, engine assembly, handle bars, wheels, blade, and various fasteners and control cables. Each part is identified by a numerical label, corresponding to the detailed parts list below.
Key components visible in the diagram include:
- Mower Deck (1, 2)
- Wheels (3) with different types: Plastic-Rib (498618), Plastic-Waffle (498790), Steel-Rib (041046), Steel-Rib (041111)
- Handle Assembly (6, 7)
- Engine Control Throttle (4) and Cable (5)
- Baffles (8) for the deck
- Bail/Control Lever (9, 10)
- Trailing Shield (16, 111583, 111609)
- Blade Adapter (18) and Blade (030296, 030353) with Washer (106005)
- Various bolts, screws, nuts, and washers (e.g., 22, 23, 24, 25, 28, 30, 31, 32, 33, 42, 43, 44, 45, 49, 50, 56)
- Height Adjustment components (38, 54, 55)
- Decals (19, 20, 21, 36, 46)
- Cable Ties (15) and Cable Clamps (27)
- Rope Stop (34) and Rope Guide Eyebolt (37)
- Chute Deflector Assembly (14)
Note: The Grass Catcher (30-0215) is mentioned but not shown in the diagram.
Parts List
Part No. | Index No. | Description |
---|---|---|
028613 | 1 | Deck-20" |
028621 | 2 | Deck-22" |
030296 | 3 | Blade-20" |
030353 | 4 | Blade-22" |
5 | Wheel Assembly. | |
498618 | 7" Plastic-Rib | |
498790 | 7" Plastic-Waffle | |
041046 | 7" Steel-Rib | |
041111 | 8" Steel-Rib | |
051060 | 6 | Control-Throttle |
051037 | 7 | Cable-Engine/Blade Control |
071563 | 8 | Handle-Lower |
071076 | 9 | Handle-Upper |
464305 | 10 | Baffle 20" Rear Standard - Front Optional |
106963 | Baffle 22" - Rear Standard - Front Optional | |
104687 | 11 | Bail-Engine/Blade Control |
106880 | 12 | Bail-Engine/Blade Control w/Cushion Grip • |
106005 | 13 | Blade Washer |
106914 | 14 | Clip-Trailing Shield |
107086 | 15 | Handle Bracket-Right Hand |
107094 | 16 | Handle Bracket-Left Hand |
463950 | 17 | Chute Deflector Assembly |
110379 | 18 | Cable Tie |
111583 | 19 | Trailing Shield-20" w/o Ht. Adj. |
111609 | 20 | Trailing Shield-20" w/ Ht. Adj. |
111609 | 21 | Trailing Shield-22" w/o Ht. Adj. |
111617 | 22 | Trailing Shield-22" w/ Ht. Adj. |
435529 | 23 | Plastic Tip-Setting Lever |
126466 | 24 | Blade Adapter |
144063 | 25 | Decal-Danger |
144204 | 26 | Decal-Blade Warning |
760330 | 27 | Decal-Starting Instructions |
150011 | 28 | Bolt-Carriage 1/4-20 x 5/8 |
150060 | 29 | Wheel Bolt w/Ht. Adj. |
150201 | 30 | Washer-Curved 5/16 |
150235 | 31 | Wingnut 5/16-18 |
150276 | 32 | Woodruff Key #6 |
150318 | 33 | Cable Clamp |
150623 | 34 | Screw-Sheet Metal #10 x 5/8 |
153668 | 35 | Wheel Bolt w/o Ht. Adj. |
152496 | 36 | Blade Bolt |
151555 | 37 | Washer-Flat 1/4 |
151613 | 38 | Screw #10-32 x 3/8 Hex Sems |
151936 | 39 | Bolt-Curved Head 5/16-18 x 2-1/4 |
152074 | 40 | Rope Stop |
451492 | 41 | Nut-Hex 3/8-16 Flange |
760074 | 42 | Decal-Engine Control |
152629 | 43 | Eyebolt-Rope Guide |
153650 | 44 | Shoulder Bolt-Ht. Adj. |
428664 | 45 | Back Plate-Ht. Adj. LH Front/RH Rear |
428714 | 46 | Back Plate-Ht. Adj. RH Front/LH Rear |
452318 | 47 | Nut #10-24 Hex Nylon Insert |
457168 | 48 | Bolt 3/8-16 x 7/8 Thread Forming |
457499 | 49 | Bolt 1/4-20 x 1/2 Thread Forming |
462093 | 50 | Washer-Flat 1/4" |
458687 | 51 | Bolt-Hex Head #10-24 x 1/2 |
714170 | 52 | Decal-Model Number |
715011 | 53 | Hairpin Cotter |
715037 | 54 | Nut-Keps 1/4-20" |
715045 | 55 | Bolt-Hex Head 1/4-20 x 3/4 |
715086 | 56 | Locknut 3/8-16 |
715607 | 57 | Washer-Belleville |
715417 | 58 | Washer 3/8 SAE |
715508 | 59 | Locknut 1/4-20 |
776500 | 60 | Setting Lever-Height Adjuster |
777862 | 61 | Wheel Lever-Height Adjuster. |
461665 | 62 | Washer Lock-Internal Tooth |