Model 53E 22" Rotary Mower
Grass Catcher Model GC-12
This document presents an exploded view diagram and a comprehensive parts list for the MTD Model 53E 22-inch Rotary Mower, including the GC-12 Grass Catcher. The diagram illustrates how various components assemble, with each part identified by an index number corresponding to its entry in the parts list.
DANGER
NOTE: Parts are right or left hand as viewed from operator position.
Approximate cutting heights 1-1/8" to 3-1/8".
Parts List
INDEX NO. | PART NO. | DESCRIPTION |
---|---|---|
1 | 028886 | Chute Deflector Assembly |
2 | 024364 | Deck - 22" |
3 | 030353 | Blade - 22" - Offset |
4 | 041111 | Wheel - 8" |
5 | 051037 | Cable - Engine/Blade Control* |
6 | 051219 | Control Throttle |
7 | 071563 | Handle - Lower |
8 | 071142 | Handle - Upper |
9 | 091033 | Arm Assembly - Wheel |
10 | 090589 | Back Plate - Height Adjuster |
11 | 715524 | Locknut-3/8-16 |
12 | 104679 | Handle Bracket - Left Hand |
13 | 104661 | Handle Bracket - Right Hand |
14 | 109298 | Bail Engine/Blade Control* |
15 | 106914 | Clip - Trailing Shield |
16 | 106005 | Blade Washer |
17 | 110064 | Bolt Cap |
18 | 110379 | Cable Tie |
19 | 111260 | Plastic Tip - Height Adjuster |
20 | 111617 | Trailing Shield* |
21 | 126466 | Blade Adapter |
22 | 144063 | Decal - Danger |
23 | 001461 | Decal - Blade Warning |
24 | 144899 | Decal - Starting Instructions |
25 | 150011 | Bolt - Carriage 1/4-20 x 5/8 |
26 | 150730 | Shoulder Bolt - Wheel |
27 | 150201 | Washer - Curved 5/16 |
28 | 150276 | Woodruff Key No. 6 |
29 | 150318 | Cable Clamp |
30 | 150623 | Screw - Sheet Metal 10 x 5/8 |
31 | 151613 | Bolt - Hex HD Sems #10-32 x 3/8 |
32 | 151795 | Wing Nut 5/16-18 |
33 | 151936 | Bolt - Curved Hd 5/16-18x2-1/4 |
34 | 152074 | Rope Stop |
35 | 152629 | Eyebolt - Rope Guide |
36 | 152405 | Bolt-Carriage 3/8-16 x 3/4 |
37 | 156182 | Washer Plastic - Height Adjuster |
38 | 152421 | Washer Spring - Height Adjuster |
39 | 150862 | Bolt - Blade 3/8-24 x 1 |
40 | 156125 | Shoulder Bolt - Height Adjuster |
41 | 452318 | Nut - #10-24 Hex Nylon Insert |
42 | 457168 | Bolt 3/8-16 x 7/8 TDFM |
43 | 458687 | Bolt - Hex Head 10-24 x 1/2 |
44 | 714170 | Decal - Model Number |
45 | 715011 | Hairpin Cotter |
46 | 715037 | Locknut - 1/4-20 Keps |
47 | 715078 | Locknut-1/4-20 Whiz |
48 | 715086 | Locknut-3/8-16 Top |
49 | 715417 | Washer - 3/8 SAE |
50 | 715508 | Locknut-1/4-20 Top |