MTD 20"/22" Side Discharge Rotary Mower Parts
Models: WD22H, C223H, HADRS20H, 02031H
Grass Catcher Model: GC 6AA - P/N 161018
Replacement Bag P/N: 160457
Exploded View Diagram Description
The document includes an exploded view diagram illustrating the assembly of the MTD 20"/22" side discharge rotary mower. The diagram shows various components such as the deck, wheels, handle assembly, engine, blade, and grass catcher, each identified by a numerical index. Key parts include the deck (1, 1A), blades (2, 3), wheels (4, 5), handle components (6, 7, 12, 13), engine mounting parts (36, 37, 38, 46, 47), and control cables (5, 5A, 51). Specific sections highlight "Mowers Without Height Adjusters" and indicate different types of cable connections like "FLAG-TYPE" and "SNAP-IN TYPE".
Parts List
| Index No. | Part No. | Description |
|---|---|---|
| 1 | 013425 | Deck 20" |
| 1 | 013433 | Deck 22" |
| 2 | 030031 | Blade-20" Flat |
| 2 | 030049 | Blade-22" Flat |
| 3 | Wheel Assembly | |
| 4 | 041012 | 6" Plastic White - Diamond |
| 4 | 041533 | 6½" Plastic White Diamond |
| 4 | 040246 | 7" Plastic-White-Diamond |
| 4 | 041525 | 7" Plastic-White-Diamond |
| 4 | 041046 | 7" Steel White-Rib-Flange Bearing |
| 4 | 040857 | 8" Plastic-White-Diamond |
| 4 | 040865 | 8" Plastic-White-Diamond-Roller Bearing |
| 4 | 041111 | 8" Steel-White-Rib-Flange Bearing |
| 4 | 042432 | 8" Plastic-White-Diamond |
| 5 | 051219 | Control-Throttle w/Cable |
| 5 | 051466 | Cable-Engine Blade Control (Flag Type) |
| 5A | 052142 | Cable-Engine Blade Control (Snap-In Type) |
| 6 | 071563 | Handle-Lower |
| 6 | 071076 | Handle-Upper |
| 6 | 071084 | Handle-Upper Vinyl Grip |
| 6 | 072181 | Handle-Upper Cushion Grip |
| 8 | 101519 | Baffle 20/22" Rear or Front |
| 9 | 104687 | Bail-Engine/Blade Control |
| 9 | 109470 | Bail-Engine/Blade Control Vinyl Grip |
| 10 | 106336 | Washer-Blade Adapter |
| 11 | 106914 | Clip-Trailing Shield |
| 12 | 107086 | Handle Bracket-Right Hand |
| 13 | 107094 | Handle Bracket-Left Hand |
| 13 | 391706 | Chute Deflector Assembly |
| 15 | 110379 | Cable Tie |
| 16 | 111609 | Trailing Shield-20/22" w/o Hgt. Adj. |
| 16 | 111617 | Trailing Shield-20/22" w/Hgt. Adj. |
| 17 | 111559 | Plastic Tip-Setting Lever |
| 18 | 133231 | Blade Adapter |
| 19 | 144063 | Decal-Danger |
| 20 | 009415 | Decal-Blade Warning |
| 21 | 144899 | Decal-Starting Instructions |
| 22 | 150011 | Bolt-Carriage 1/4-20 x 5/8 |
| 23 | 150060 | Wheel Bolt w/Hgt. Adj. |
| 24 | 150201 | Washer-Curved 5/16 |
| 25 | 150235 | Wingnut 5/16-18 |
| 26 | 150276 | Woodruff Key #6 |
| 27 | 150318 | Cable Clamp |
| 28 | 150623 | Screw-Sheet Metal #10 x 5/8 |
| 29 | 150730 | Wheel Bolt w/o Hgt. Adj. |
| 30 | 162024 | Bolt-Blade |
| 31 | 151613 | Bolt-Hex Head #10-32 x 3/8 Sems |
| 32 | 151928 | Bolt-Curved Head 5/16-18 x 1 3/4 |
| 33 | 152074 | Rope Stop |
| 34 | 152371 | Rope Guide |
| 35 | 153650 | Shoulder Bolt-Hgt. Adj. |
| 36 | 428664 | Back Plate-Height Adjuster R.H. Front L.H. Rear |
| 37 | 428714 | Back Plate-Height Adjuster LH. Front R.H. Rear |
| 38 | 452318 | Nut-#10-24 HX Nylon Insert |
| 39 | 457168 | Bolt-3/8-16 x 7/8 Thread Forming |
| 40 | 457499 | Bolt-1/4-20 x 1/2 Thread Forming |
| 41 | 462093 | Washer-Flat 1/4" |
| 42 | 458687 | Bolt-Hex Head #10-24 x 1/2 |
| 43 | 153874 | Bolt-1/4-20 x 2 1/4 Hex Head |
| 44 | 715011 | Hairpin Cotter |
| 45 | 715037 | Nut-Keps 1/4-20 |
| 46 | 715045 | Bolt-Hex Head 1/4-20 x 3/4 |
| 47 | 451492 | Locknut 3/8-16 TopLock Flange |
| 48 | 715201 | Boit-Hex 3/8-16 x 3/4 w/o Hgt. Adj. |
| 49 | 715607 | Washer-Belleville |
| 50 | 715417 | Washer 3/8 SAE |
| 51 | 715508 | Locknut 1/4-20 Top |
| 52 | 776500 | Setting Lever-Height Adjuster |
| 53 | 777862 | Wheel Lever-Height Adjuster |
Notes
Optional Equipment: Items marked with a bullet point (•) indicate optional equipment.
Servicing: When servicing, use only genuine factory replacement parts that are specifically for your particular model. Parts are right or left hand as viewed from the operator position. Specifications are subject to change without prior notice.
