ROVSUN Vertical Fries Machine

Product Overview

The ROVSUN Vertical Fries Machine is designed for efficient potato cutting. This manual provides essential information for its safe and effective use.

The ROVSUN Vertical Fries Machine is a robust, chrome-plated metal device designed for cutting potatoes into fries. The machine features a stable base with two foot pedals, a vertical lever mechanism for operation, and interchangeable cutting blades and push blocks.

Contact and Support

For any questions or issues, please contact ROVSUN:

Email: support@rovsun.com. Please include your seller's Order # in the subject line for faster assistance.

Phone: (1)855-882-2333.

Important Safety Warnings

1. Read all instructions in this manual before using the product. Follow all warnings and operating instructions for use.
2. Do not allow children to operate the product.
3. Be careful when handling; do not hold the blade part when carrying the cutter.
4. When changing the push block, be careful and do so gently.

Description

• Main body: Aluminium alloy material
• Potato holder: Accommodates three sets of blade moulds for potato chips with sizes: 6mm, 9mm, 13mm.

How to Use

1. Insert the potato into the potato holder, then revolve the handle by hand until the potato finishes cutting.
2. To change the blade mould: If you need another size's potato chip, adjust the set of the blade set and the black mould, take out the blade and the black mould, then install another size blade black mould.

Cleaning

1. Clean the mould by wet cloth or water; do not clean the blade by hand.
2. Remove the blade from the machine for cleaning if necessary.

Package Includes

• 1x Potato Slicer
• 4x interchangeable blades
• 4x push blocks

Assembly

1. Check the parts before use. If there are missing parts, contact the seller directly. Do not modify the cutter on your own.
2. Take out the handle that is used to guide the push block, and position it according to the picture above (concave up).
3. Test the handle and make sure it can smoothly guide the push block.
4. To change the blade, unscrew the wing nut and take out the original blade, then replace it with the desired blade (be cautious when operating this step to prevent injury).
5. To change the push block, gently push out the original push block, then replace it with the desired push block (be cautious when operating this step to prevent injury).