ROVSUN ZY-SB114 Full Stainless Steel Ice Crusher

Brief Introduction

The ROVSUN ZY-SB114 is a full stainless steel ice crusher designed for crushing large ice blocks into smaller pieces, commonly used for cold drinks. Its construction from full stainless steel offers advantages such as being non-rusty, safe, and hygienic. The appliance utilizes a vacuum double-layer stainless technique to conserve cold energy.

Diagram Description: The ice crusher features a pusher plate, steel plate, handle, curved handle, electric monitor, ice exit, ice containing area, rack base, switch, and protecting band.

Precautions Before Use

• Please read the specification carefully and understand its structure, function, main condition, and safe operation requirements to maximize the equipment's efficiency.
• After opening the carton, clean the unit with a wet towel and verify that the blade is firmly installed.
• Ensure the power supply matches the power outlet and that the power outlet is safe. Install the switch protection before use.

Main Parameters

Package Contents

• 1 x Ice shaver
• 1 x Stainless Steel bowl
• 1 x User Manual

Operating Instructions

1. Check the power line and plug to ensure the circuit contact is in good condition. Avoid creep age, then close the switch and plug in the ice crusher.
2. Open the cover of the ice crusher and put in the appropriate amount of ice, then cover it.
3. Press the switch to start the ice crusher. Depress the handle to push the ice towards the ice exit.
4. It is recommended to use ice with a diameter of 4-5cm.

Cleaning Instructions

• Turn off the power switch and pull plugs.
• Please clean the water in the hopper after using.
• Please use only a cloth to scrub the hopper; do not use water cleaning.
• Do not touch the blade when cleaning to avoid scratching your fingers.
• Place the machine in a dry place.

Safety Precautions and Attention

• Children are forbidden to use this machine. Regardless of any circumstance, do not touch the steel plate when working.
• You must use a grounded socket. Keep the cable away from heat. Do not connect the cable and electrical sockets to water or other liquids.
• Do not use damaged cables, power plugs, or sockets.
• The unit should be placed on a flat surface. Ice should be put in evenly to avoid fuselage vibration.
• During operation, do not allow fingers into the ice containing area.
• Continuous running of the machine should not exceed 30 minutes, with a 10-minute interval for motor cooling.
• To avoid jamming, do not force the unit to operate with excessive pressure.
• Do not shave fruits and vegetables.
• After use, a small amount of ice may remain in the hopper. This is normal.
• Please clean any remaining water in the ice tank after using.
• Do not arbitrarily dismantle the motor. When cleaning or repairing the machine, you should first turn off the power switch and pull plugs.
• The machine cannot keep running empty.

Electrical Data

The electrical components include:

• L: 3x0.75 copper conductor
• K: 5A/110V switch
• Fu: fuse
• M: motor

Electrical Schematic Description: The diagram shows a single-phase AC power input labeled L (Line) and N (Neutral). These connect to a switch (K), which then feeds into a fuse (Fu) and a motor (M). A ground connection is also indicated.

Recipes

1) Mung bean flavor

Boil mung beans with the right amount of sugar water. Stew with warm fire until the mung beans are crisp and rotten. Turn off the fire. Then stir the mung beans with condensed milk, which can be purchased from supermarkets.

2) Peanut flavor

Fire peanuts with oil until crisp to increase their sweetness. Wrap the crisp peanuts with paper or towels to absorb excess oil. Place the cooked peanuts into a plastic bag, crush them with a rolling pin. Put the resulting mixture into the bowl and sprinkle with peanuts.

3) Fruit flavor

Fruit-flavored ice does not require special methods. For fruits like pineapple, mango, watermelon, banana, kiwi, simply cut them into small pieces, mix with some condensed milk and sugar, and serve.

Warranty Information

The warranty card includes fields for recording maintenance records: