Multifunction Meat Grinder

Description

Specifications & Circuit Diagram

Circuit Diagram: A simple electrical schematic showing power input (L, N), a switch, and a motor (M).

Packing List

Warm Tips

1. Blade must be only assembled into the bowl and make sure it is operated with bowl cover.
2. Blade is very sharp, please be careful when you assemble and dismount it.
3. Never assemble the blade directly on the motor unit without bowl and bowl cover to start the machine, it will cut your hands.

Features

1. "S" shape design blade
2. Micro switch control
3. Motor over heating protection
4. Removable parts
5. Planetary-drive gear box

Attentions

1. Please check the voltage of your home to make sure the unit you buy is suitable.
2. Turn off before you assemble and dismount the machine.
3. Make sure the power cord and plug are in good condition before use, otherwise contact the seller and never repair yourself.
4. If you need any maintain service, please contact the seller.
5. Make sure the blade is fit well before you put the food material in.
6. Run the machine, please refer to instruction and tips.
7. Never run with nothing in the bowl or overload.
8. Never put the bowl in to the microwave oven or refrigerator to heat or freeze.
9. Never grind high hardness and watery food material.
10. Never touch the blade or motor when the grinder is working.
11. Make sure there is a 2 min breaking for every work, the max constant working time is 30 seconds one time.
12. Make sure the blade is completely stop before you take them off.
13. If the machine stop working suddenly, the motor maybe overheated, please shut down and wait 20 min to cool off.
14. Keep the machine away from kids and mentally disturbed person.
15. The machine is for home use only.

Maintenance

1. Never put any parts into the dishwasher to clean.
2. Please immediately clean the container, blades and container cover in warm water after use.
3. Never put the motor unit into liquid, clean the motor base and motor unit with wet rag.
4. Never clean the machine with steel wool or corrosive liquid.
5. Blade is very sharp, do not directly cleaned by hand, in order to avoid injury, the clean water should be very clear to see the blade.
6. After cleaning, please dry the parts and install all the components.
7. High-temperature sterilization for any parts is forbidden.

How to use

1. Please clean the bowl, blades and bowl cover carefully when you use it the first time.
2. Plug in and press the on/off switch to start the machine, remove your hand, it will stop work.
3. Assemble and usage:
   1. Place the antislip mat.
   2. Assemble the blade.
   3. Place the material into the grinding bowl and put the cover on.
   4. Fit motor unit on the cover.
   5. Plug in and press to start working.
   6. Plug off after use.
4. How to grinding meat:
   • You can choose to use single blade or dual blade. Assemble the blade, remove the skin, tendon and bone and cut the meat into pieces, 1-2 cm will be better. Put the meat into the bowl, max is 1.0kg, please do not exceed the max line.
5. How to grinding vegetables and fruit:
   • Recommend dual blades, cut the material into pieces and put it into the bowl, max is 4/5 of the total volume of the bowl, make sure the cover can be fitted well.
6. How to grinding dried pepper and chillies:
   • You can choose to use single blade or dual blade, but max is 2/3 of the total volume of the bowl. Otherwise you can not get good effect and may shorten the lifespan of the machine.
7. After plug in, press the on/off switch to start working. Recommended working time is 30 seconds.
8. Plug off after use, take off the blade and motor unit when the blades stop completely, then take the food material.
9. If food material stick to bowl, please turn off the power and scrape it off to the bowl.
10. The machine can not be used to grinding those high hardness such as soybean and those food material with too much water.
11. If the unit shake due to uneven distribution of ingredients, turn off the machine and distribute the ingredients evenly in the bowl, restart.
12. Recommended max working time is 30 seconds, take a 2minutes break.

Tips for grinding

Trouble Shooting

Warranty Card

Maintenance Records

Remarks

Any problem please don't hesitate to contact us via Amazon messaging system, we will resolve all your problem ASAP. Customers are always the best teachers for us to keep growing!