ROVSUN Twin Tub Washing Machine Instruction Manual
Model: XPB46-RS4 | SKU: G27000201
Introduction
Thank you for purchasing this Semi Auto Washing Machine. The design of this product has adopted the special patent technology of cabinet integration. The entire body casing is made of plastic and this ensures that your semi auto washing machines will never be rust eaten. The washer is relatively lighter and space saving as compared to other general twin-tub washing machines.
Through the integration of new technology, this washer with large wave pulsator and new water flow, will not only produce less twisting of the clothing but also better cleaning and washing effect. The functions of water inlet, sprinkling, spin-dry and water flow are also made available to save time, labor and water usage.
We trust that you will find your purchase of this beautifully designed and dignified-looking semi auto washing machine to your satisfaction.
Electrical Principle
Diagram illustrating the electrical connections for the washing machine.
| Parameter | Washing | Spinning |
|---|---|---|
| Rated voltage | 110-120 V~ | 110-120 V~ |
| Rated frequency | 60 Hz | 60 Hz |
| Rated energy consumption power | 300 W | 250 W |
Made in China
Technology Parameter and Specifications
| Water Capacity (Wash) | Input Power (Wash) | Input Power (Spin) | Power Source (Voltage) | Power Source (Hertz) | Size (L*W*H) | Weight |
|---|---|---|---|---|---|---|
| 24L | 300W | 250W | 110-120V | 60Hz | 600*380*690(mm) | 12kg |
Washing Instructions
Preparation
- The machine should be placed on flat ground.
- The plug seat should have a safety ground connection.
- Lay down the drain hose.
- Connect the water inlet hose to the water tap.
- Adjust the water level based on the type of clothing material and its weight.
- Turn on the power.
Washing
- Set the Select Switch to "Soft" or "Standard" position.
- Set the "wash timer" and place the clothes into the tub. Adjust the water level to the proper position and put the proper amount of detergent into the wash tub.
- Set the "wash timer"; the washing machine will start to wash.
- After washing, set the Select Switch to the "Drain" position to start draining water.
Spinning
- According to the "spin timer" process, spin the clothes for 1min~5min, repeat once or twice.
Important Safety Notes for Spinning:
- Never put your hands into the spin tub whilst it is working.
- Never wash textiles which contain volatile materials to avoid machine damage or water blockage due to stains.
- Do not put heavy objects on top of the washing machine.
- Do not place the washing machine near to heat-generating items such as gas cookers.
Rinsing
- After spinning, the spin tub will stop. Open the spin cover and transfer the clothes from the spin tub to the wash tub to prepare for rinsing.
- Repeat the washing process but do not add any detergent.
Attention Points
- The timer should always be turned clockwise.
- When abnormal sounds or movements occur during operation, stop the washing machine as soon as possible and check. (Please refer to troubleshooting, Page 7.)
- For your own safety, ensure that the ground connection is correct.
- When washing, the water temperature should be below 60°C; otherwise, the plastic components may be deformed.
Maintenance
- After use, pull out the plug to prevent accidents.
- When cleaning the washing machine, use a soft cloth to prevent scratching the surface of the cabinet.
- Do not put the washing machine outdoors or in damp areas such as the bathroom.
Troubleshooting
| Problem | Reason | Solution |
|---|---|---|
| The pulsator is too slow | Power cut or switch off | Switch on the power |
| Transmission belt left off | Assemble the transmission belt | |
| Belt pulley has become loose | Tighten the belt | |
| Pulsator is blocked | Remove the block | |
| The pulsator does not rotate | Belt is loose | Tighten the belt or renew it |
| Abnormal noise and vibration | The clothes in the spin dry tub loosened | Replace the clothes in the tub |
| The clothes in the spin dry tub is unbalanced | ||
| There is something jammed between the pulsator and the wash tub | Remove the jammed object(s). | |
| Water leaks from the wash tub | Wash tub was not connected tightly to the hose | Reconnect and tighten the hose |
| The slight switch is in loose contact | Adjust the contactor of the switch | |
| Spin dry basket or basket does not rotate | The shaft coupling is loose | Tighten the screw |
| The shaft of spin dry basket is twined by the textile | Remove the textile | |
| Brake dragline is loose | Tighten the dragline | |
| The spin tub does not drain | Something had dropped into the space between spin tub and spin dry basket | Remove the object |
Attention: When the problem cannot be resolved, please contact the Service Center.
Structure and Parts of Product
Diagram showing the components of the washing machine.
- 1. Spin cap
- 2. Spin tub
- 3. Spin cover
- 4. Water inlet
- 5. Control panel
- 6. Pulsator
- 7. Wash cover
- 8. Cabinet
- 9. Bottom
- 10. Wash timer switch
- 11. Wash & drain selector switch
- 12. Spin timer switch
- 13. Drain hose
- 14. Power wire
- 15. Back cover
Customer Support
Thank you for your purchase. Any questions, please do not hesitate to contact us. We will handle all your problems ASAP. Your feedback is vital to us! And we will always try to do better. For more details, please contact us by email via support@rovsun.com. (Write your seller's Order # on the subject of the email, so that we can find your order and better assist your issue) Or call us at (1)855-882-2333.
[FCC Certified] [Recyclable] [CE Certified]
