LINDBYN Mirror
Assembly and Installation Guide
Important Information
Screws and other hardware for fixing the mirror to the wall are not included. As wall materials vary greatly, it is essential to use screws and fixings suitable for your specific wall type. For advice on appropriate screw systems, please contact your local specialized dealer.
Tools Required
- Spirit level
- Pencil
- Tape measure
[Diagram Description: A person is shown with a spirit level, pencil, and tape measure. Another diagram depicts a person contemplating mirror components with a question mark, then consulting IKEA.]
Installation Steps
Step 1: Measure and Mark
Measure and mark two points on the wall for the mirror's hanging points. Ensure these points are level and spaced 65.5 cm (25 3/4") apart.
[Diagram Description: A spirit level and pencil are used to mark two points on a wall. A dashed line indicates a horizontal measurement of 65.5 cm (25 3/4") between these points. The outline of the mirror is shown below these marks.]
Step 2: Prepare Wall Fixings
Select appropriate screws and wall anchors suitable for your wall material. [Diagram Description: Various screws and wall anchors are shown. A magnified view highlights a wall anchor with a 'STOP' symbol, indicating caution or the need for a specific type of fastener. A measurement for the anchor's width is also indicated.] Consult a specialist if unsure about the correct fixings.
Step 3: Hang the Mirror
Carefully hang the mirror onto the prepared wall fixings. [Diagram Description: The mirror is shown being placed onto the wall, aligning with the previously marked points.]
